Fracturing Solutions

Finoric is the number one supplier of fracturing fluid breakers in North America. We offer all live and encapsulated oxidizing breakers as well as enzyme breakers.  

We have conducted numerous fluid break and regain conductivity tests, and can recommend the most cost-effective breaker for your fluid system and reservoir conditions. 

We are back-integrated into the manufacturing of oxidizing breakers and the encapsulation. Stop buying from the middlemen and come direct to the source.   

We offer a broad range of diverters for both near-wellbore and far-field diversion applications. 

• Near-wellbore: available in various particle sizes that will divert fluids at the proppant or matrix face.  
• Far-field: designed to penetrate the proppant pack, creating a more complex fracture network and minimizing parent-child interactions.   

Both near-wellbore and far-field will biodegrade from a solid to a benign liquid at reservoir temperatures ranging from 130 to 300°F. Multiple grades of diverters, designed for specific bottomhole temperatures, are offered. 

Non-Emulsifiers

The FloSurf non-emulsifier product line is designed to rapidly separate fracturing fluid and oil emulsions, improving production during flowback and initial production.  

These products are compatible with all known fracturing fluids and can be concentrated and dosed at lower rates to minimize freight costs and emissions.  

Flowback Aids and Production Enhancement

The FloSurf flowback aids and production enhancement products can alter wettability, increase hydrocarbon relative permeability, and improve recovery.  

Each product is a blend of surfactants and nanoparticles, which improves the efficiency and performance of the product. We have optimized product formulations and dose rates through a large study based on interfacial tension, surface tension, and contact angle across multiple shale crude oils.    

ScaleGone

This encapsulated slow-release scale inhibitor can replace liquid scale inhibitors and provide long-term protection against scale deposition. The product is approximately five times more active than the nearest competitor, lowering dose rates and improving the economics.      

Liquid Scale Inhibitors 

We offer a full line of field-ready scale inhibitors, including phosphonate and polymer scale inhibitors. Utilizing Finoric's scale loop and scale modeling software, we can recommend the right scale inhibitor for your application.  

Finoric’s FinCide product line is a full suite of EPA-registered biocides.  We offer kill testing and compatibility testing to qualify the right type of biocide. 

All products are manufactured in-basin and available for wellsite delivery.

Finoric sources and tests friction reducers from top manufacturers.  With our friction loop and rheological capabilities, we can test performance with any water quality and reservoir temperature. 

We have spent considerable R&D time to understand the performance of friction reducers in high-TDS waters and mitigating negative interactions with iron.

With regional stocking points in each of the major shale basins and last mile service we can provide the right friction reducer, economically for your fracturing operations. 

The FinoTAP Frac-G 3-in-1 product line is a suite of proprietary, economical acidizing additive packages that provide corrosion inhibition, iron control, and non-emulsifying properties.  

It contains no propargyl alcohol or other hazardous chemistry, providing a more sustainable solution. It is supplied in one convenient additive, reducing the need for multiple product inventories. 

FinoTAP Frac-G products are designed for acid spearhead applications ahead of hydraulic fracture treatments. They can be used up to a bottomhole temperature of 350°F. 

The Clay Ste product line is designed to prevent both fines migration and hydration of swelling clays.   

KCl substitutes and more advanced biopolymer solutions are offered for permanent clay control. Select products have also shown to not interfere with friction reducer performance. 

Finoric has the capabilities to quantify product performance with your reservoir and run compatibility testing with fracturing fluid systems.

Finoric offers cost-effective acid corrosion inhibitors shown to be effective in temperatures <150 to 350°F.

A blend of carefully selected organic compounds help ensure optimal performance and environmental safety. They can be used in multiple applications including acid spearhead operations ahead of hydraulic fracture treatments, acid stimulation, and acid remediation.

Finoric offers various type of iron chelator chemistries that can be customized to the application and fluid type.  

In addition, we offer EnCap-CIT, a specialty encapsulated iron control product designed to be placed with fracturing fluid. This provides medium-term protection against iron scaling and friction reducer gelling.