Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Tartaric Acid USP NF BP FCC Food ACS Reagent Grade Supplier, Manufacturer's Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India and UAE we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, GLP certified, ISO-9001:2015 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Tartaric Acid Suppliers
USP NF BP FCC Food ACS Reagent Grade Suppliers
Tartaric Acid USP NF Grade
Butanedioic acid, 2,3-dihydroxy-; Butanedioic acid, 2,3-dihydroxy-, [R-(R*,R*)]-.
Tartaric acid; L -(+)-Tartaric acid [526-83-0] and [87-69-4].
Tartaric Acid, dried over phosphorus pentoxide for 3 hours, contains not less than 99.7 percent and not more than 100.5 percent of C4H6O6.
A: It responds to the tests for Tartrate.
B: When ignited, it gradually decomposes, emitting an odor resembling that of burning sugar
(distinction from citric acid).
Specific rotation: between +12.0 and +13.0 .
Test solution: 200 mg per mL, in water.
Loss on drying: Dry it over phosphorus pentoxide for 3 hours: it loses not more than 0.5% of its weight.
Residue on ignition: not more than 0.1%.
Limit of oxalate: Nearly neutralize 10 mL of a solution of it (1 in 10) with 6 N ammonium hydroxide, and add 10 mL of calcium sulfate TS: no turbidity is produced.
Sulfate: To 10 mL of a solution (1 in 100) add 3 drops of hydrochloric acid and 1 mL of barium chloride: no turbidity is produced.
Heavy metals: 0.001%.
Tartaric Acid BP Grade
C4H6O6 --- 150.1--- 87-69-4
Content: 99.5 per cent to 101.0 per cent (dried substance).
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
A. Solution S (see Tests) is strongly acid.
B. It gives the reactions of tartrates.
Solution S: Dissolve 5.0 g in distilled water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Specific optical rotation: + 12.0 to + 12.8 (dried substance)
Oxalic acid: Maximum 350 ppm, calculated as anhydrous oxalic acid.
Chlorides: Maximum 100 ppm.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 0.2 per cent, determined on 1.000 g by drying in an oven at 105 °C
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Tartaric Acid FCC Food Grade
C4H6O6 Formula wt 150.09
Tartaric Acid occurs as colorless or translucent crystals or as a white, fine to granular, crystalline powder. It is stable in air. One gram dissolves in 0.8 mL of water at 25°, in about 0.5 mL of boiling water, and in about 3 mL of alcohol. Its solutions are dextrorotatory.
Function: Acidifier; sequestrant; flavoring agent.
Identification :A sample solution gives positive tests for Tartrate.
Assay: Not less than 99.7% and not more than 100.5% of C4H6O6 after drying.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.5%.
Optical (Specific) Rotation: Between +12.0° and +13.0°.
Oxalate: Passes test.
Residue on Ignition: Not more than 0.05%.
Sulfate: Passes test.
Tartaric Acid ACS AR Analytical Reagent Grade
Formula Wt 150.0
CAS Number 87-69-4
Assay: Not less than 99.0%
Insoluble matter: 0.005%
Residue after ignition: 0.02%
Chloride (Cl): 0.001%
Oxalate (C2O4): Passes test
Phosphate (PO4): 0.001%
Sulfur compounds (as SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
1 June, 2021