Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Shale Gas Hydraulic Fracturing, Coil Tubing, Slick Water, Production, Stimulation, Well Intervention, Cementing Chemicals Supplier Manufacturers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India and UAE we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, GLP certified, ISO-9001:2015 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Product Family Trade Name Description Acidizing Acid Emulsifier E-56 Acid-oil emulsifier used to create an acidized fracture fluid system in calcareous formations. The emulsifier retards the reaction rate of hydrochloric acid so that the fluid system can extend deeper into the formation, creating a larger acidized fracture network. Safe Acid AC-50 Environmentally-friendly, biodegradable acid replacement system used as a breakdown acid preceding a fracturing treatment. Product selection is based on previous treatment results. Typical loadings are per frac design. Hydrochloric Acid HCl 15%, HCl 32% Series of HCL acid formulations specifically used as a break-down fluid and to lower pH in halide-based brine fluids. These products dissolve calcium carbonates. Product selection is determined through previous treatment results. Typical loadings are per frac design. Xylene Xylene Oil phase for emulsified acid fracture fluid. Retards reaction rate of acid so that fluid system can extend deeper in to the formation, creating a larger acidized fracture network. Acid Corrosion Inhibitor ACI-BQC, ACI-E, ACI-Green, ACI-Propylagyl Alcohol Free Series of highly effective acid corrosion inhibitors designed for use in well acidizing, acid fracturing, and break-down acids in hydraulic fracturing. For use in hydrochloric acid, hydrofluoric acid, HCI/HF mud acids, and organic acids. These inhibitors provide excellent corrosion protection of surface and downhole tubular goods and associated equipment. Effective at temperatures up to 350° F. Iron Control Citric, Acetic, NTA, Ciric-Acetic Blend, Mercaptoethanol, Series of Iron Control agents that can either dissolve, chealate, reudce to a soluble form or blends of various mechanisms tailor made to well conditions and desired outcome. Also available with Sludge Busters to prevent or remove Iron induced sludge. Non Emulsifier NE-112, NE-118, NE-227 Series of multi-functional surfactant blends designed
to prevent down-hole emulsions between
the crude oil and treating fluid. Product selection and
loading is determined by various laboratory tests.
Surfactant S-114, S-120, S-229 Series of multi-functional aqueous surfactant blends
designed to assist flow-back recovery after stimulation,
enhance oil removal from the reservoir rock to
increase initial production, and prevent down-hole
emulsions between the crude oil and treating fluid. Product selection and loading is determined by various
Biocides Glut, Glut-Quat, THPS, TTPC Series of fast-acting biocides highly effective against
aerobes, SRBs, APBs. Can be used
for pre-treating frac tanks or added on the fly while pumping.
Product Family Trade Name Description Fracturing - Slick Water and Gels Clay Control and KCl Substitute Clay Ste™ ADV, Choline Chloride, TMAC, Clay Ste™ Permanent Series of Clay Stabilizers and Potassium Chloride Substitutes for temperory and permanent inhibitiion against clay swelling and migration. Typically used at 0.5 to 2 gpt, optimum loadings determined by CST testing. Gelling Agent Acid Gel, Oil Gel Gelling agents for Hydrochloric Acid and Mineral Oil for visosified Acid and viscosified Oil based frac fluids. Friction Reducer FRSlick A350, FRSlick A600, FRSlick A600, FRSlick C349 Anionic and Cationic polyacrylamide co-polymer emulsion based friction reducer designed for slick-water applications in fresh water to high density brines. Typical loadings range from 0.25 to 1.0 gpt. Viscosified FR VFR-100 Viscosified Friction Reducer designed for higher proppant loading and to create wider fractures without the complications associated with gel FR Breaker FRB-31, FRB-10, FRB-7, FRB-5 Oxidizing liquid breaker containing sodium chlorite. Effective at temperatures above 180°F at neutral pH fluids and above 225°F in fluids having pH above 9.5. The loading ranges from 1.0 to 4.0 gpt, but should be tested to optimize the break schedule. Guar Gel FHG-30, FHG-35, FHG-40, CMHPG-4, HPG-4, Xanthan Series of Guar gum and Derivitazed Guar gum slurries containing 4 ppg gum dispersed in refined mineral oil.
The slurry viscosity ranges from 175 to 300 cP at
511 sec-1 for easy metering into the field water. The
hydration rate is expected to achieve 80% in 3 min,
depending on water temperature and quality. Loading is normally provided by the operating company
or determined by laboratory testing based on critical
Gel Stabilizer STS-30, TEA-85 Series of gel stabilizers designed to aid in the stabilization of crosslinked gels and other polymers susceptible to oxidative thermal degradation at higher temperatures. Product selection and loading is determined by laboratory testing. Buffers pH6, pH 9, pH12 Series of buffers to assist in faster hydration of Guar based gels, pH control for crosslinked fluids and for use with Boron containing produced water Cross Linkers XLBBG-4, XLB-4, XL-10, XL-34 Series of Boron and Zirconium based crosslinkers for guar based gelling agents. Various types from internally buffered to non-bufferred, instant to delayed, low to high boron. Loadings determined by lab testing Enzyme Breaker Zyme-10, Zyme-25, Zyme-50 Biodegradable enzyme breaker with better efficiency
and cleaner processes in the breaking of a fluid.
Effective at temps of 80-220°F and pH range of 5.5 to
10.5. Dilution range depends on frac fluid water quality. Dilutions are made to provide loadings of 0.5 to 1.0 gpt
Oxidizing Solid Breakers Ammonium Persulfate, Sodium Persulfate, Sodium Bromate Straight oxidizing breaker designed
for use in applications from 130° to 250°F. At temperatures below 130°F, an activator will be required. Breaks backbone of guar polymer and the side chains of FR polymers. Typical loadings range from 0.25 to 2.0 ppt, but should
be tested to optimize the break schedule.
Encapsulated Solid Breakers Encap Ammonium Persulfate, Encapsulated Sodium Bromate Low-temperature, mid-temperature, high-temperature and ultra-high temperature encapsulated persulfates and bromates. Encapsulated oxidizing breakers are designed as a solid, slow release that allows delayed break of the fracturing fluid, higher breaker concentrations without compromising fluid rheology, no loss to formation during
fluid leak-off, and improved fracture conductivity for
temperatures of 140° to 350°F. Typical loadings range
from 0.25 to 2.0 ppt, but should be tested to optimize
the break schedule.
Diverting Agents Rock Salt, Biodegradable, Benzoic Acid, DA-355, DA-LT Series of Diverting Agents to temporarily plug high-flow
perforations and divert treating fluid to new regions of
the reservoir. The product is normally pumped as slugs
in the treating fluid at loadings of 10 to 50 lb
per perforation. Various generic and a patented version available for a wide range of low to high temp wells and wide range of applications ie for re-fracs, near wellbore and far field diversion.
Flow Back Aid Micro-Emulsion Patented surfactant for flowback aid microemulsion for extremely low surface tension and contact angle. Lab studies show it outperforms StimOil®. Surfactant chemically binds to proppant pack to provide excellent drainage over multiple pore-volumes. Scale Inhibitor ScaleGone™, Scale-Hib 50, SI-625, SI-306, SI-3338, SI-5025, SI-B325 Series of Scale Inhibitors based on Phosphonates and/or Polymers custom designed for well chemistry. Available in various concentrations and pH. ScaleGone™ is a long-term, sustained-release, scale inhibitor providing inhibiton for years from within the fracture, especially suited for multi-stage horizontal wells. Line/Pump Flush Diesel Replacement Environmentally safe non-BTEX flush fluid designed as a replacement for diesel and used to flush lines and chemical addition pumps after pumping the fracturing chemicals. This product is dyed blue for easy visibility. High flash point with excellent detergency. Will not harm pumps and seals. Product Family Trade Name Description Coiled Tubing Lubricant Pipe-on-pipe Lubricant Pipe-on-pipe Lubricant has a high affinity for metal surfaces, and will adhere tenaciously to drill pipe and drill collars. This guarantees that the lubricant will be concentrated exactly where it is needed, between the pipe and the formation. The pipe can then slide effectively without excessive loss of weight to the bit. HP-HT Lube eliminates torque and drag, prevents differential sticking, and protects the drill pipe from corrosion. Lubricant Liquid Beads Proprietary blend of highly active copolymer beads in an environmentally friendly carrier fluid. Lubricant BecaEQ- Graphite The ultimate in stuck-pipe, CT operations, running production tubing and wireline operations. Contains micro-particles in the form of graphite, probably the best known lubricant. Disperses very well in aqueous fluids. H2S Inhibitor Film Forming Amine Protect your equipment in high H2S environments, this specialized heavy filming blend will form polymer films on metal surface in the presence of H2S. H2S Scavenger Triazine Neutralizes toxic H2S by reacting with it to form water soluble products. Corrosion Inhibitor Film Forming Amine Protect your equipment in high CO2 and dissolved O2 environments, this specialized heavy filming blend will form polymer films on metal surface in the presence of CO2, H2S and Oxygen. Foamer Foam 810 Foamer and wetting agent combination, designed to create a soft foam which will degrade rapidly when exposed to atmospheric conditions Xanthan Gum Xanthan Gel Excellent shear thinning properties, heat stable up to 300 F and can tolerate high TDS brines. Widely used in drilling, workover, completions, CT, spotting, spacer, pigging and milling fluids. Gel Sweep Synthetic Polymers for high temp Gel Sweeps Quick and efficient way to make high carrying capacity gel sweeps for BHT up to 400 F. Viscosifies in presence of divalent salts. Available as a slurry in oil to facilitate on the fly use without fish eyes. Well Intervention, Production and Cementing Packer Fluid Gyp Dissolver Barium Dissolver Traced Paraffin Inhibitor Micellar Solvent Oxygen Scavenger Paraffin Solvent Shmoo Removal Emulsion Breaker Corrosion Inhibitor Cement Spacer Cement Retarder Fluid Loss Additive Gas Migration Additive Defoamer
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Shale Gas Hydraulic Fracturing, Coil Tubing, Slick Water, Production, Stimulation, Well Intervention, Cementing Chemicals, Summary Line Card Ammonium Persulfate Acetic Acid Acid Emulsifier Acid Retarder Acid Viscosifier Acid Corrosion Inhibitor Ammonium Bifluoride ATMP Phosphonate, Amino tris (methylene phosphonic acid) Barium Sulfate Remover BHMT Phosphonate or BHMTPMPA Bellacide 300 & Bellacide 355 BME Iron Reducer or Dissolver Cross Linker for Guar, Boron and Zirconium based Cement Defoamer Encapsulated Citric Acid Citric Acid Clay Stabilizer Coil Tubing Lube, CTG Lube Carboxymethyl Hydroxypropyl Guar Diverting Agent DETA diethylenetriamine penta(methylene phosphonic acid) Didecyl Dimethyl Ammonium Chloride Drag Reducing Agent Encapsulated Gel Breaker Enzyme Gel Breaker Fe46 - Iron Control Blend Dry Friction ReducerFinoFR-8 Flow Back Aid Foam 810 FinoPAC Multipurpose Additive, corrosion inhibitor cum bactericide and oxygen scavenger FinoFoam-D, Foamer for Deliquification or Unloading of Gas Wells Heavy Crude Foamer Foam418 Friction Reducer Fast Hydrating Guar Gum Powder Granules Slurry FinCide 123, Biocide Solution, Glut Quat Glutaraldehyde Solution Glycerin Gas Hydrate Inhibitor Gel Sweep, FinoSweep Iron Sulfide Scale Inhibitor Finotreat FeS High pH Buffer HP HT Lube Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate FinoScav-NT Non-Triazine Based H2S Hydrogen Sulfide Scavenger Hydrogen Sulfide Scavenger Liquid FR Breaker FRB-1 Fino Liquid Beads Mud Remover Cleaner Non Emulsifier for acidizing Nomul Non-Emulsifier for Brines Oil Gelling Agent Oil well fracturing drilling Biocide Packer Fluid Inhibitor Paraffin Dispersant Phthalic Acid Phthalic Anhydride Pipe Pickle Potassium chloride KCl substitute Particle Gel for Conformance Control Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Relative Permeability Modifier and Water Gas Shut-Off, AquaControl Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Scale Inhibitor Scalegone Solid - Scale Paraffin Asphaltene Inhibitor Sand Consolidation System Sodium Bromate Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Total Acidizing System Xanthan Gum Slurry Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Potassium Chloride Zinc Chloride
1 June, 2021