Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Copper Sulfate Pentahydrate Anhydrous Supplier, Manufacturer's Representative, CAS Number 7758-98-7 (anhydrous), 7758-99-8 (pentahydrate)
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Copper Sulfate Pentahydrate Suppliers
For MSDS Sheet Click MSDS SDS of Copper Sulfate Anhydrous Suppliers
Pentahydrate Anhydrous Suppliers
Copper Sulphate Pentahydrate BP Grade Ph Eur
CuSO4-5H2O --- 249.7 --- 7758-99-8
Content: 99.0 per cent to 101.0 per cent.
Appearance: Blue, crystalline powder or transparent, blue crystals.
Solubility: Freely soluble in water, soluble in methanol, practically insoluble in ethanol (96 per cent).
A. Add several drops of dilute ammonia to 1 ml of solution S (see Tests). A blue precipitate is formed. On further addition of dilute ammonia the precipitate dissolves and a dark blue colour is produced.
B. Loss on drying (see Tests).
C. Dilute 1 ml of solution S to 5 ml with water. The solution gives reaction of sulphates.
Solution S: Dissolve 5 g in water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear.
Chlorides: Maximum 100 ppm.
Iron: Maximum 1.00 × 102 ppm.
Atomic absorption spectrometry: To meet the requirement.
Lead: Maximum 50.0 ppm.
Loss on drying: 35.0 per cent to 36.5 per cent, determined on 0.500 g by drying in an oven at 250 ± 10 °C.
Cupric Sulfate Cupric Sulfate USP Grade
CuSO45H2O --- 249.69
Sulfuric acid, copper(2+) salt (1:1), pentahydrate.
Copper(2+) sulfate (1:1) pentahydrate [7758-99-8].
Anhydrous 159.61 [7758-98-7].
Cupric Sulfate, dried at 250 to constant weight, contains not less than 98.5 percent and not more than 100.5 percent of CuSO4.
Identification: A solution (1 in 10) responds to the tests for Copper and for Sulfate.
Loss on drying: Dry it at 250 to constant weight: it loses between 33.0% and 36.5% of its weight.
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.003%.
Limit of nickel: The limit is 0.005%.
Copper Sulfate Cupric Sulfate FCC Food grade
CuSO4 Formula wt, anhydrous 159.6
CuSO4·5H2O Formula wt, pentahydrate 249.68
INS: 519 CAS: anydrous [7758-98-7]
CAS: pentahydrate [7758-99-8]
Copper Sulfate occurs as blue crystals, crystalline granules, or powder. It effloresces slowly in dry air and is freely soluble in water, soluble in glycerin, and slightly soluble in alcohol.
Identification: A 1:20 solution gives positive tests for Copper and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of CuSO4·5H2O.
Iron: Not more than 0.01%.
Lead: Not more than 4 mg/kg.
Substances Not Precipitated by Hydrogen Sulfide: Not more than 0.3%.
Cupric Sulfate Pentahydrate Analytical Reagent Grade
Copper(II) Sulfate Pentahydrate
CuSO4 · 5H2O Formula Wt 249.68
CAS Number 7758–99–8
Assay: 98.0–102.0% as CuSO4 · 5H2O
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.002%
Calcium (Ca): 0.005%
Iron (Fe): 0.003%
Nickel (Ni): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.02%
Specifications of Copper Sulphate Anhydrous Commercial Pure
Appearance: Blue Colored Powder & Crystals
Copper as Cu %: 38.2 Minimum
Nickel as Ni %: 0.05 Maximum
Iron as Fe %: 0.30 Maximum
Lead as Pb %: 0.003 Maximum
Cadmium as Cd %: 0.001 Maximum
Arsenic as As %: 0.0007 Maximum
Mercury as Hg %: 0.0007 Maximum
Insoluble matter %: 0.03 Maximum in water.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
31 May, 2021