Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Email: ask@finoric.comSearch our website here:
Zinc Oxide FCC Food Grade USP BP Ph Eur Grade Analytical Reagent Supplier, Manufacturer's Representative, CAS Number 1341-13-2
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.The marked pharmaceutical and food grade chemicals are offered by our principals directly.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
For MSDS Sheet Click MSDS SDS of Zinc Oxide Suppliers
Zinc Oxide
CAS Number 1341-13-2 USP FCC Food Grade Analytical Reagent BP Ph Eur Grade Suppliers
Zinc Oxide USP Grade
ZnO --- 81.39 -- CAS 1314-13-2.Zinc Oxide, freshly ignited, contains not less than 99.0 percent and not more than 100.5 percent of ZnO.
Identification:
A: When strongly heated, it assumes a yellow color that disappears on cooling.
B: A solution of it in a slight excess of 3 N hydrochloric acid responds to the tests for Zinc .
Alkalinity: Mix 1.0 g with 10 mL of hot water, add 2 drops of PhPh, and filter: if a red color is produced, not more than 0.30 mL of 0.10 N hydrochloric acid is required to discharge it.
Loss on ignition: Weigh accurately about 2 g, and ignite at 500 to constant weight: it loses not more than 1.0% of its weight.
Carbonate and color of solution: Mix 2.0 g with 10 mL of water, add 30 mL of 2 N sulfuric acid, and heat on a steam bath, with constant stirring: no effervescence occurs and the resulting solution is clear and colorless.
Arsenic: 6 ppm.
Lead: Add 2 g to 20 mL of water, stir well, add 5 mL of glacial acetic acid, and warm on a steam bath until solution is effected: the addition of 5 drops of potassium chromate produces no turbidity or precipitate.
Iron and other heavy metals: Cool two separate 5-mL portions of the solution obtained in the test for Carbonate and color of solution. White precipitates are formed when potassium ferrocyanide is added to the first portion and when sodium sulfide is added to the second portion.
Assay— Dissolve about 1.5 g of freshly ignited Zinc Oxide, accurately weighed, and 2.5 g of ammonium chloride in 50.0 mL of 1 N sulfuric acid with the aid of gentle heat, if necessary. When solution is complete, add methyl orange and titrate the excess sulfuric acid with 1 N sodium hydroxide. Each mL of 1 N sulfuric acid is equivalent to 40.69 mg of ZnO.
Zinc Oxide FCC Food Grade
ZnO Formula wt 81.38
CAS: 1314-13-2DESCRIPTION
Zinc Oxide occurs as a fine, white, amorphous powder. It gradually absorbs carbon dioxide from the air. It is insoluble in water and in alcohol, and is soluble in dilute acids and in strong bases.
Function: Nutrient.REQUIREMENTS
Identification
A. When strongly heated, a sample assumes a yellow color that disappears on cooling.
B. A solution of sample in a slight excess of 3 N hydrochloric acid gives positive tests for Zinc, Appendix IIIA.
Assay: Not less than 99.0% of ZnO after ignition.
Alkalinity: Passes test.
Cadmium: Not more than 3 mg/kg.
Lead: Not more than 10 mg/kg.
Loss on Ignition: Not more than 1.0%.
Substances Not Precipitated by Sulfide: Not more than 0.5%.
Zinc Oxide Analytical Reagent
ZnO
Formula Wt 81.39
CAS Number 1314-13-2REQUIREMENTS
Assay: minimum 99.0% ZnOMAXIMUM ALLOWABLE
Insoluble in dilute sulfuric acid: 0.01%
Alkalinity: Passes test
Chloride (Cl): 0.001%
Nitrate (NO3): 0.003%
Sulfur compounds (as SO4): 0.01%
Calcium (Ca): 0.005%
Iron (Fe): 0.001%
Lead (Pb): 0.005%
Magnesium (Mg): 0.005%
Manganese (Mn): 5 ppm
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc Oxide BP Ph Eur Grade
Ph Eur
ZnO -- 81.4 -- 1341-13-2DEFINITION
Content: 99.0 per cent to 100.5 per cent (ignited substance).CHARACTERS
Appearance: Soft, white or faintly yellowish-white, amorphous powder, free from gritty particles.
Solubility: Practically insoluble in water and in ethanol (96 per cent). It dissolves in dilute mineral acids.IDENTIFICATION
A. It becomes yellow when strongly heated; the yellow colour disappears on cooling.
B. Dissolve 0.1 g in 1.5 ml of dilute hydrochloric acid and dilute to 5 ml with water. The solution gives the reaction of zinc.TESTS
Alkalinity: Shake 1.0 g with 10 ml of boiling water. Add 0.1 ml of PhPh solution and filter. If the filtrate is red, not more than 0.3 ml of 0.1 M hydrochloric acid is required to change the colour of the indicator.
Carbonates and substances insoluble in acids: Dissolve 1.0 g in 15 ml of dilute hydrochloric acid. It dissolves without effervescence and the solution is not more opalescent than reference suspension and is colourless.
Arsenic: Maximum 5 ppm, determined on 0.2 g.
Cadmium: Maximum 10.0 ppm.
Iron: Maximum 200 ppm.
Lead: Maximum 50.0 ppm.
Loss on ignition: Maximum 1.0 per cent, determined on 1.00 g by ignition to constant mass at 500 ± 50 °C.ASSAY
Dissolve 0.150 g in 10 ml of dilute acetic acid. Carry out the complexometric titration of zinc. 1 ml of 0.1 M sodium EDTA is equivalent to 8.14 mg of ZnO.
Suppliers, Manufacturer's Representative:
Finoric LLC
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USATel: 1-855-346-6742 (1-855-FINORIC)
Email: ask@finoric.comWe offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
![]()
![]()
2 January, 2021