Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here
Zinc Carbonate Pure & USP Grade Supplier and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
MSDS of Zinc Carbonate Manufacturers
Specifications & a Typical COA of Commercial Grade Zinc Carbonate:
Particulars ----- Specification ----- Observation
Zinc Content ---- 55% minimum ------- 57.4%
Iron ------------ 0.02% maximum ----- Complies
Heavy Metals ---- 0.02% maximum ----- Complies
Zinc Carbonate USP
Basic zinc carbonate.
Zinc subcarbonate [3486-35-9]
Zinc Carbonate contains the equivalent of not less than 70.0 percent of ZnO.
Identification: A solution of it in a slight excess of hydrochloric acid responds to the tests for Zinc.
Insoluble matter: Dissolve 10-g Zinc Carbonate in a mixture of 100 mL of water and 7 mL of sulfuric acid, and heat on a steam bath for 1 hour. Filter the solution through a tarred sintered-glass crucible, wash with hot water, dry the crucible at 105 , cool, and weigh: the residue weighs not more than 20 mg (0.02%).
Chloride: A 1.0-g Zinc Carbonate dissolved in a mixture of 20 mL of water and 3 mL of nitric acid shows no more chloride than corresponds to 0.03 mL of 0.02 N hydrochloric acid (0.002%).
Sulfate: Dissolve 10.0-g Zinc Carbonate in a mixture of 75 mL of water and 10 mL of hydrochloric acid, and filter. Neutralize the filtrate with ammonium hydroxide, dilute with water to 100 mL, and mix. To 10.0 mL of this solution add 1 mL of 0.6 N hydrochloric acid and 1 mL of barium chloride TS, mix, and allow to stand for 10 minutes. This test solution shows no more turbidity, if any, than that produced in a solution containing 0.10 mL of 0.02 N sulfuric acid and the same quantities of reagents used to prepare the test solution (0.01%).
Iron: Dissolve 1.0-g Zinc Carbonate in 20 mL of water and 3 mL of hydrochloric acid: the limit is 0.002%.
Lead: the limit is 5 ppm.
Substances not precipitated by ammonium sulfide: Dissolve 1.0-g Zinc Carbonate in 10 mL of water and 2 mL of sulfuric acid, dilute with water to 80 mL, add 10 mL of ammonium hydroxide, and pass hydrogen sulfide through the solution for about 30 minutes. Dilute with water to 100 mL, and allow the precipitate to settle. Decant the supernatant through a filter, and transfer 50 mL of the clear filtrate to a tarred dish, evaporate to dryness, ignite, gently at first and finally at 800 ± 25 , cool, and weigh: the weight of the residue does not exceed 2 mg (0.4%).
Zinc Carbonate USP Manufacturers Suppliers:
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland Texas area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.
Inorganic Chemicals Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate. Calcium Formate Calcium D Saccharate Glucarate Calcium Nitrate, Calcium Nitrite Chromic Chloride Cupric or Copper Chloride Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Formate Sodium Metabisulfite Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Anhydrous Sodium Thiosulfate Pentahydrate Zinc Ammonium Chloride, Galvanizing Flux Zinc Carbonate Zinc Chelate Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers Phase Change Material PCM Manufacturers for AC Air Condition, Electronics, Refrigerated Transport etc. Deicer Anti icing Snow melting
29 March, 2018