Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Stannous Chloride Dihydrate Commercial Pure and BP FCC Food ACS Reagent Grade Supplier, Manufacturer's Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India and UAE we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Stannous Chloride Dihydrate Suppliers
Stannous Chloride Dihydrate
Tin Chloride BP FCC Food ACS Reagent Grade Suppliers
Tin(II) chloride, also known as stannous chloride, is a white crystalline solid with the formula SnCl2. It forms a stable dihydrate, but aqueous solutions tend to undergo hydrolysis, particularly if hot. SnCl2 is widely used as a reducing agent (in acid solution), and in electrolytic baths for tin-plating. Tin(II) chloride should not be confused with the other chloride of tin; tin(IV) chloride or stannic chloride (SnCl4).
Stannous Chloride Dihydrate BP Ph Eur
SnCl2,2H2O --- 225.6 --- 10025-69-1
Content: 98.0 per cent to 102.0 per cent.
Appearance: White or almost white, crystalline powder or colourless crystals, efflorescent in air.
Solubility: Freely soluble in water (the solution becomes cloudy after standing or on dilution), freely soluble in ethanol (96 per cent). It dissolves in dilute hydrochloric acid.
A. To 1 ml of solution S1 (see Tests) add 5 ml of water R and 0.05 ml of mercuric chloride solution R . A blackish-grey precipitate is formed.
B. Dissolve 1.0 g in 3.0 ml of water R . Add 0.5 ml of dilute sodium hydroxide solution R to the cloudy solution; a yellowish flocculent precipitate is formed. Add 6.5 ml of water R . To
1.0 ml of the previously shaken suspension add 1.0 ml of strong sodium hydroxide solution R ; the precipitate dissolves and the resulting solution is clear and colourless.
C. Dissolve 10 mg in 2 ml of dilute nitric acid R . The solution gives reaction (a) of chlorides.
Solution S1: To 0.40 g add 1 ml of dilute hydrochloric acid R and dilute to 20 ml with distilled water R .
Solution S2: Dissolve 1.0 g in dilute hydrochloric acid R and dilute to 30 ml with the same acid. Heat to boiling. Add 30 ml of thioacetamide solution R and boil for 15 min (solution A). Take 5 ml, filter and heat the filtrate to boiling. Add 5 ml of thioacetamide solution R and boil for 15 min. If a precipitate is formed, add the remainder of solution A (solution A') to the mixture. Add 10 ml of thioacetamide solution R and boil. Repeat the series of operations from "Take 5 ml" until a precipitate is no longer formed on addition of thioacetamide solution R to the filtrate obtained from the 5 ml of solution A (solution A', solution A'', etc. respectively). If no precipitate is formed or if no more precipitate is formed combine the solution obtained with the remainder of solution A (solution A', solution A'', etc. respectively), filter and wash the precipitate with 10 ml of water R . Heat the filtrate until the resulting vapour no longer turns a moistened piece of lead acetate paper R blackish-grey. Allow to cool and dilute to 50 ml with water R.
Appearance of solution: The solution is clear and colourless.
Dissolve 10.0 g in dilute hydrochloric acid R and dilute to 20 ml with the same acid.
Substances not precipitated by thioacetamide: Maximum 0.2 per cent.
Evaporate 25 ml of solution S2 to dryness and ignite at 600 ± 50 °C. The residue weighs a maximum of 1 mg.
Sulphates: Maximum 500 ppm, determined on solution S1.
Iron: Maximum 100 ppm.
Heavy metals: Maximum 50 ppm.
Stannous Chloride FCC Food Grade
SnCl2 Formula wt, anhydrous 189.60
SnCl2·2H2O Formula wt, dihydrate 225.63
INS: 521 CAS: anhydrous [7772-99-8]
CAS: dihydrate [10025-0969-091]
Stannous Chloride occurs as white or colorless crystals. It is anhydrous or contains two molecules of water of hydration. It is very soluble in water, and it is soluble in alcohol and in
glacial acetic acid.
Function: Reducing agent; antioxidant.
A. Add mercuric chloride TS, drop-wise, to a 1:20 solution of sample in 2.7 N hydrochloric acid. A white or gray-white precipitate forms.
B. A 1:20 aqueous solution gives positive tests for Chloride.
Assay: Not less than 99.0% and not more than 101.0% of SnCl2, or not less than 98.0% and not more than 102.2% of SnCl2·2H2O.
Iron: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Solubility in Hydrochloric Acid: Passes test.
Substances Not Precipitated by Sulfide: Not more than 0.05%.
Sulfate: Passes test.
Stannous Chloride Dihydrate ACS AR Analytical Reagent Grade
Tin (II) Chloride Dihydrate
SnCl2 . 2H2O
Formula Wt 225.65
CAS Number 10025-69-1
Assay: 98.0-103.0% SnCl2 . 2H2O
Solubility in hydrochloric acid: Passes test
Sulfate (SO4): Passes test
Calcium (Ca): 0.005%
Iron (Fe): 0.003%
Lead (Pb): 0.01%
Potassium (K): 0.005%
Sodium (Na): 0.01%
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
27 September, 2021