Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Sodium fluoride USP BP Analytical Reagent Supplier, Manufacturer's Representative, CAS Number 7681-49-4
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Sodium fluoride Suppliers
USP BP Analytical Reagent CAS 7681-49-4 Suppliers
Sodium fluoride is an inorganic chemical compound with the formula NaF. A colorless solid, it is a source of the fluoride ion in diverse applications. Sodium fluoride is less expensive and less hygroscopic than the related salt potassium fluoride.
Sodium Fluoride USP Grade
NaF 41.99 -- [7681-49-4].
Sodium Fluoride contains not less than 98.0 percent and not more than 102.0 percent of NaF, calculated on the dried basis.
A: Place 1 g in a platinum crucible in a well-ventilated hood, add 15 mL of sulfuric acid, and cover the crucible with a piece of clear, polished glass. Heat the crucible on a steam bath for 1 hour, remove the glass cover, rinse it in water, and wipe dry: the surface of the glass is etched.
B: A solution (1 in 25) responds to the tests for Sodium.
Acidity or alkalinity: Dissolve 2.0 g in 40 mL of water in a platinum dish, add 10 mL of a saturated solution of potassium nitrate, cool the solution to 0 , and add 3 drops of PhPh. If no color appears, a pink color persisting for 15 seconds is produced by not more than 2.0 mL of 0.10 N sodium hydroxide. If the solution is colored pink by the addition of PhPh, it is rendered colorless by not more than 0.50 mL of 0.10 N sulfuric acid. Save the neutralized solution for the test for Fluosilicate.
Loss on drying: Dry it at 150 for 4 hours: it loses not more than 1.0% of its weight.
Fluosilicate: After the solution from the test for Acidity or alkalinity has been neutralized, heat to boiling, and titrate while hot with 0.10 N sodium hydroxide until a permanent pink color is obtained: not more than 1.5 mL of 0.10 N sodium hydroxide is required.
Chloride: Dissolve 300 mg in 20 mL of water, and add 200 mg of boric acid, 1 mL of nitric acid, and 1 mL of 0.1 N silver nitrate: any turbidity produced is not greater than that of a blank to which has been added 1.0 mL of 0.0010 N hydrochloric acid (0.012%).
Heavy metals: To 1 g, in a platinum dish or crucible, under a hood, add 1 mL of water and 3 mL of sulfuric acid, and heat at as low a temperature as practicable until all of the sulfuric acid has been expelled. Dissolve the residue in 20 mL of water, neutralize the solution to PhPh with ammonium hydroxide, add 1 mL of glacial acetic acid, dilute with water to 45 mL, filter, and use 30 mL of the filtrate for the test: the limit is 0.003%.
Sodium Fluoride BP Grade Ph Eur
Content: 98.5 per cent to 100.5 per cent (dried substance).
Appearance: White or almost white powder or colourless crystals.
Solubility: Soluble in water, practically insoluble in ethanol (96 per cent).
A. To 2 ml of solution S (see Tests) add 0.5 ml of calcium chloride solution R. A gelatinous white precipitate is formed that dissolves on adding 5 ml of ferric chloride solution R1.
B. To about 4 mg add a mixture of 0.1 ml of alizarin S solution R and 0.1 ml of zirconyl nitrate solution R and mix. The colour changes from red to yellow.
C. Solution S gives reaction (a) of sodium.
Solution S: Dissolve 2.5 g in carbon dioxide-free water R without heating and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear (2.2.1) and colourless.
Acidity or alkalinity: Dissolve 2.5 g of potassium nitrate R in 40 ml of solution S and dilute to 50 ml with carbon dioxide-free water R. Cool to 0 °C and add 0.2 ml of PhPh solution R. If the solution is colourless, not more than 1.0 ml of 0.1 M sodium hydroxide is required to produce a red colour that persists for at least 15 s. If the solution is red, not more than 0.25 ml of 0.1 M hydrochloric acid is required to change the colour of the indicator.
Chlorides: Maximum 200 ppm.
Fluorosilicates: Heat to boiling the neutralised solution obtained in the test for acidity or alkalinity and titrate whilst hot. Not more than 0.75 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to red.
Sulphates: Maximum 200 ppm.
Loss on drying: Maximum 0.5 per cent, determined on 1.000 g by drying in an oven at 130°C for 3 h.
Sodium Fluoride Analytical Reagent Grade
Molecular Formula: NaF
Formula Wt 41.99
CAS Number 7681-49-4
Assay: 99% NaF
Insoluble matter: 0.02%
Loss on drying at 150C: 0.3%
Chloride (Cl): 0.005%
Titrable acid: 0.03 meq/g
Titrable base: 0.01 meq/g
Sodium fluosilicate (Na2SiF6): 0.1%
Sulfate (SO4): 0.03%
Sulfite (SO2): 0.005%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.003%
Potassium (K): 0.02%
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
4 January, 2021