Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Sodium Feredetate BP or Ferric Sodium EDTA Supplier, Manufacturer's Representative, CAS Number 15708-41-5
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Sodium Feredetate or Ferric Sodium EDTA Suppliers
Sodium Feredetate BP
Ferric Sodium EDTA CAS 15708-41-5 Suppliers
Sodium Feredetate BP Grade
Sodium Feredetate is iron(III) sodium ethylenediaminetetra-acetate monohydrate. It contains not less than 98.0% and not more than 102.0% of C10H12O8N2FeNa, calculated with reference to the dried substance.
A yellow or yellowish brown, crystalline powder; hygroscopic.
A. The infrared absorption spectrum is concordant with the reference spectrum of sodium feredetate.
B. Ignite 0.5 g and allow to cool. Dissolve the residue in 2 ml of hydrochloric acid , add sufficient water to produce 20 ml and filter. The filtrate yields reaction C characteristic of iron salts. Dilute 1 volume of the filtrate to 10 volumes with water; the solution yields reaction B characteristic of iron salts.
C. Dissolve 2 g in 30 ml of water, slowly add 6.5 ml of a 20% w/v solution of potassium hydroxide, shake and filter the resulting suspension. Evaporate 8 ml of the filtrate to dryness, ignite and dissolve the residue in 4 ml of water. The solution yields reaction B characteristic of sodium salts.
Acidity: pH of a 1% w/v solution, 4.0 to 6.5.
Free iron: Not more than 500 ppm when determined by the following method.
Dissolve 0.2 g in sufficient water to produce 20 ml and filter. Label three tubes A, B and C. Place 5 ml of the filtrate into each of tubes A and B and 4 ml of water and 1 ml of an iron standard solution prepared in the following manner in tube C. For the iron standard solution dilute 25 volumes of a 0.1726% w/v solution of ammonium iron(III) sulphate in 0.05M sulphuric acid to 200 volumes with water (25 ppm of Fe(III)). Add 1 ml of a 1.0% w/v solution of disodium catechol-3,5-disulphonate into each of tubes A and C and 1 ml of water to tube B. Measure the absorbance of solution A at 670 nm using solution B in the reference cell and of solution C using water in the reference cell. The absorbance of solution A is not greater than that of solution C.
Heavy metals: 1 g complies with limit test D for heavy metals 20 ppm.
Free sodium edetate: To 4 ml of a 1.0% w/v solution add 2 ml of ferric iron standard solution (50 ppm) and 1 ml of a 1.0% w/v solution of disodium catechol-3,5-disulphonate and mix. Prepare a standard in the same manner using 4 ml of a 0.010% w/v solution of disodium edetate in place of the solution of the substance being examined. Measure the absorbance of the solutions at 670 nm using water in the reference cell. The absorbance of the solution of the substance being examined is not less than that of the standard solution (1%).
Sulphates: Dissolve 2 g in 40 ml of water, add 5 ml of a 20% w/v solution of sodium hydroxide and sufficient water to produce 50 ml, shake and filter. Evaporate 6.2 ml of this solution to drynessand ignite until no trace of carbon remains. Cool and dissolve the residue in 10 ml of distilled water. Neutralise the solution with 2M hydrochloric acid using litmus paper as external indicator and add 2 ml in excess. Boil the solution, cool, dilute to 15 ml with distilled water and filter. The filtrate complies with the limit test for sulphates 600 ppm.
Loss on drying: When dried over silica gel at 120° at a pressure not exceeding 2 kPa for 5 hours, loses 4.0 to 13.5% of its weight. Use 1 g.
We can also offer the product with low microbial count;
Total aerobic microbial count: Not more than 1000 cfu/gm (typically 200 cfu/gm).
Total yeast and mould count: Not more than 100 cfu/gm (typically 10 cfu/gm).
Enterobacteriaceae count: Not more than 10 cfu/gm.
E. Coli: Absent.
S. aureus: Absent.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
4 January, 2021