 |
 Call Toll-Free: 1-855-FINORIC Houston + Midland + Pleasanton, Texas, USA Also Oklahoma, OK and Williston, USA. E-mail: ask@finoric.com |
- 
- 
Search our website here:
Sodium Carbonate USP NF BP Analytical Reagent Anhydrous, Monohydrate, Decahydrate Supplier, Manufacturer's Representative, CAS Number 497-19-8, 5968-11-6, 6132-02-1
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Sodium Carbonate Suppliers
Sodium Carbonate
USP NF BP Analytical Reagent Anhydrous, Monohydrate, Decahydrate CAS 497-19-8, 5968-11-6, 6132-02-1 Suppliers
Sodium Carbonate USP NF
Na2CO3 (anhydrous) MW 105.99;
Carbonic acid, disodium salt.
Disodium carbonate [CAS Number 497-19-8]
Monohydrate 124.00 [CAS Number 5968-11-6]
It is anhydrous or contains one molecule of water of hydration. It contains not less than 99.5 percent and not more than 100.5 percent of Na2CO3, calculated on the anhydrous basis.
Identification: It responds to the tests for Sodium 191 and for Carbonate.
Water: Dry about 2 g, accurately weighed, at 105 for 4 hours: the anhydrous form loses not more than 0.5%, and the hydrous form between 12.0% and 15.0%, of its weight.
Heavy metals: the limit is 0.001%.
Assay: Transfer the anhydrous substance obtained in the test for Water to a flask with the aid of 50 mL of water, add methyl red TS, and titrate with 1 N sulfuric acid. Add the acid slowly, with constant stirring, until the solution becomes faintly pink. Heat the solution to boiling, cool, and continue the titration. Heat again to boiling, and titrate further as necessary until the faint pink color is no longer affected by continued boiling. Each mL of 1 N sulfuric acid is equivalent to 52.99 mg of Na2CO3.
Sodium Carbonate FCC Food Grade
Na2CO3 Formula wt, anhydrous 105.99 CAS 497-19-8
Na2CO3·H2O Formula wt, monohydrate 124.00 CAS Number 5968-11-6
Na2CO3·10H2O Formula wt, Decahydrate 286.14 CAS Number 6132-02-1
DESCRIPTION
It occurs as colorless crystals or as a white, granular or crystalline powder. It is anhydrous or may contain 1 or 10 molecules of water of hydration. It is freely soluble in water and insoluble in ethanol. Its solutions are alkaline to litmus. The anhydrous salt is hygroscopic, and the two hydrates are efflorescent. The decahydrate melts at about 32C.
Function: pH control.
REQUIREMENTS
Identification: A sample gives positive tests for Sodium and for Carbonate.
Assay: Not less than 99.5% and not more than 100.5% of Na2CO3 after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 1%; Monohydrate: Between 12.0% and 15.0%; Decahydrate: Between 55.0% and 65.0%.
Sodium Carbonate Monohydrate Analytical Reagent
Na2CO3-H2O
Formula Wt 124.00
CAS Number 5968-11-6
REQUIREMENTS
Assay: 99.5% Na2CO3-H2O minimum.
Loss on drying at 150C: 13.0-15.0%
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 5 ppm
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.004%
Ammonium hydroxide precipitate .. 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium Carbonate Anhydrous Analytical Reagent
Na2CO3
Formula Wt 105.99
CAS Number 497-19-8
REQUIREMENTS
Assay (dried basis) min. 99.5% Na2CO3
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium Carbonate Alkalimetric Standard Analytical Reagent
Na2CO3
Formula Wt 105.99
CAS Number 497-19-8
NOTE. For use as an alkalimetric standard this reagent should be heated at 285C for 2h.
REQUIREMENTS
Assay (dried basis): 99.95-100.05% Na2CO3
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Potassium (K): 0.005%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.004%.
Sodium Carbonate Decahydrate BP
Na2CO3-10H2O -- 286.1 -- CAS 497-19-8
DEFINITION
Content: 36.7 per cent to 40.0 per cent of Na2CO3.
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless, transparent crystals, efflorescent.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve 1 g in water R and dilute to 10 ml with the same solvent. The solution is strongly alkaline.
B. The solution prepared for identification test A gives the reaction of carbonates.
C. The solution prepared for identification test A gives reaction of sodium.
TESTS
Solution S: Dissolve 5.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference.
Dissolve 4.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 1.0 g in 20 ml of water, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 50 ppm.
Sulphate: Maximum 100 ppm, determined on solution S.
Arsenic: Maximum 2 ppm, determined on 5 ml of solution S.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 20 ppm.
Sodium Carbonate Monohydrate BP
Na2CO3-H2O -- 124.0 -- CAS 5698-11-6
DEFINITION
Content: 83.0 per cent to 87.5 per cent of Na2CO3.
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve 1 g in water R and dilute to 10 ml with the same solvent. The solution is strongly alkaline.
B. The solution prepared for identification test A gives the reaction of carbonates.
C. The solution prepared for identification test A gives reaction of sodium.
TESTS
Solution S: Dissolve 2.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference solution.
Dissolve 2.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 0.4 g in 20 ml of water R, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 125 ppm.
Sulphate: Maximum 250 ppm, determined on solution S.
Arsenic: Maximum 5 ppm, determined on 5 ml of solution S.
Iron: Maximum 50 ppm.
Dilute 5 ml of solution S to 10 ml with water.
Heavy metals: Maximum 50 ppm.
Suppliers, Manufacturer's Representative:
Finoric LLC
Beasley
Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
E-mail: ask@finoric.com
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.