Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Potassium Metabisulfite USP BP FCC Food grade Supplier, Manufacturer's Representative, CAS Number 16731-55-8
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of PotassiumMetabisulfite Suppliers
USP BP FCC Food grade CAS 16731-55-8 Suppliers
Potassium Metabisulfite USP
K2S2O5 --- 222.33
Disulfurous acid, dipotassium salt.
Dipotassium pyrosulfite CAS 16731-55-8.
Potassium Metabisulfite contains an amount of K2S2O5 equivalent to not less than 51.8 percent and not more than 57.6 percent of SO2.
Identification: A solution (1 in 20) responds to the tests for Potassium and for Sulfite.
Iron: Dissolve 1.00 g in 14 mL of dilute hydrochloric acid (2 in 7), and evaporate on a steam bath to dryness. Dissolve the residue in 7 mL of dilute hydrochloric acid (2 in 7), and again evaporate to dryness. Dissolve the resulting residue in a mixture of 2 mL of hydrochloric acid and 20 mL of water, add 3 drops of bromine TS, and boil to expel the bromine. Cool, and dilute with water to 47 mL: the limit is 0.001%.
Heavy metals: Dissolve 2 g in 20 mL of water, add 5 mL of hydrochloric acid, evaporate on a steam bath to about 1 mL, and dissolve the residue in 25 mL of water: the limit is 0.001%.
Potassium Metabisulfite FCC Food Grade
K2S2O5 Formula wt 222.31
INS: 224 CAS: [16731-55-8]
Potassium Metabisulfite occurs as white or colorless, free flowing crystals, crystalline powder, or granules. It gradually oxidizes in air to the sulfate. It is soluble in water, but it is insoluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant; bleaching agent.
Identification: A 1:10 aqueous solution gives positive tests for Potassium and for Sulfite.
Assay: Not less than 90.0% of K2S2O5.
Lead: Not more than 2 mg/kg.
Iron: Not more than 10 mg/kg.
Selenium: Not more than 5 mg/kg.
Potassium Metabisulphite BP
K2S2O5 - 222.3 - CAS 16731-55-8
Potassium metabisulphite (potassium disulphite).
Content: 95.0 per cent to 101.0 per cent.
Appearance: White or almost white powder, or colourless crystals.
Solubility: Freely soluble in water, slightly soluble in ethanol (96 per cent).
A. pH (see Tests).
B. To 5 ml of solution S (see Tests), add 0.5 ml of 0.05 M iodine. The mixture is colourless and gives reaction of sulphates.
C. Solution S gives reaction of potassium.
Solution S: Dissolve 5.0 g in carbon dioxide-free water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 3.0 to 4.5 for solution S.
Thiosulphates: To 2.00 g add 25 ml of a 42.5 g/l solution of sodium hydroxide and 75 ml of water. Shake until dissolved and add 10 ml of formaldehyde and 10 ml of acetic acid. After 5 min, titrate with 0.05 M iodine using 1 ml of starch solution. Carry out a blank titration. The difference between the volumes consumed in the 2 titrations is maximum 0.15 ml.
Iron: Maximum 10 ppm.
Selenium: Maximum 10 ppm.
Zinc: Maximum 25 ppm.
Heavy metals: Maximum 10 ppm.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
3 January, 2021