Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here
Potassium Bromide USP BP ACS Reagent Grade Supplier, Manufacturer's Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Potassium Bromide Suppliers
USP BP ACS Reagent Grade Suppliers
Potassium Bromide USP
Potassium Bromide contains not less than 98.0 percent and not more than 100.5 percent of KBr, calculated on the dried basis. It contains no added substances.
Appearance of solution: clear and colorless.
Test solution: Dissolve 10.0 g in carbon dioxide-free water, and dilute with the same solvent to 100 mL.
A: A solution containing 4.5 mg of potassium bromide responds to the test for Bromide.
B: Responds to the test for Potassium.
Acidity or alkalinity: To 10 mL of the solution prepared for the test for Appearance of solution, add 0.1 mL of bromothymol blue TS: not more than 0.5 mL of 0.01 N hydrochloric acid or 0.01 N sodium hydroxide is required to change the color of this solution.
Loss on drying: Dry it at 100 to 105 for 3 hours: it loses not more than 1.0% of its weight.
Starch–mercuric iodide solution: Triturate 1.0 g of soluble starch with 5 mL of water and pour the mixture into 100 mL of boiling water, containing 10 mg of mercuric iodide.
Procedure: To 10 mL of the solution prepared for the test for Appearance of solution add 1 mL of Starch–mercuric iodide solution, 0.1 mL of a 100 g per L solution of potassium iodide, and 0.25 mL of 0.5 M sulfuric acid. Allow to stand protected from light for 5 minutes: no blue or violet color develops.
Limit of chlorine: not more than 0.6%.
Iodides: To 5 mL of the solution prepared for the test for Appearance of solution add 0.15 mL of a 10.5 g per 100 mL ferric chloride solution, and 2 mL of dichloromethane. Shake, and allow to separate. The lower layer is colorless.
Sulfates: A 2.0-g portion shows no more sulfate than corresponds to 0.2 mL of 0.020 N sulfuric acid (0.01%).
Limit of iron: not more than 20 ppm.
Magnesium and alkaline-earth metals: (0.02%, calculated as Ca).
Heavy metals: not more than 10 ppm.
Potassium Bromide BP
Content: 98.0 per cent to 100.5 per cent (dried substance).
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water and in glycerol, slightly soluble in alcohol.
A. It gives reaction of bromides.
B. Solution S (see Tests) gives the reactions of potassium.
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromates: To 10 ml of solution S add 1 ml of starch solution R, 0.1 ml of a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops.
Chlorides: Maximum 0.6 per cent.
Iodides: To 5 ml of solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride.
Shake and allow to separate. The lower layer is colourless.
Sulphates: Maximum 100 ppm.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3h.
Potassium Bromide ACS Analytical Reagent
Formula Wt 119.00
CAS Number 7758-02-3
Assay: 99.0% KBr
pH of a 5% solution: 5.0-8.8 at 25C
Insoluble matter: 0.005%
Bromate (BrO3): 0.001%
Iodate (IO3): 0.001%
Chloride (Cl): 0.2%
Iodide (I): 0.001%
Nitrogen compounds (as N): 0.005%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Sodium (Na): 0.02%
Suppliers, Manufacturer's Representative:
Beasley Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland Texas area warehouse
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
27 March, 2018