 |
 Call Toll-Free: 1-855-FINORIC Houston + Midland + Pleasanton, Texas, USA Also Oklahoma, OK and Williston, USA. E-mail: info@finoric.com |
- 
- 
Search our website here:
Nomul Non-Emulsifier for Brines Supplier Manufacturers and Manufacturers' Representative for Fracturing
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India and UAE we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
Spanish No emulsionante para salmueras
Russian Неэмульгатор для рассолов
Arabic غير مستحلب لالمحاليل الملحية
For MSDS SDS of Nomul Non-Emulsifier for Brines Please write to us.
Non-Emulsifier for Brines
Nomul, Fracking or Fracturing Aid Suppliers
Product Description
NOMUL is a proprietary formulation of blended non-ionic and amphoteric surfactants added into the completion or workover fluids to reduce the emulsion tendency of fluids with residual oils in the formation. Completion or workover fluids can form emulsions with the residual oil in the formation during or after workover or stimulation treatments. These emulsions may remain strongly associated with the formation and can impede flow and reduce productivity. The main function of NOMUL is to break such an emulsion in-situ before the stimulated well is put back to production. Another function of NOMUL is to speed up the separation of water and oil from the initial well flow-back.
Advantages
Totally miscible in all monovalent and calcium brines
Minimally absorbing surfactant blend
Helps lower surface tension of brines
Helps lower interfacial tension
Effective at low concentrations
Effective for both oil and gas production
Helps maximize completion or workover fluid recovery
Cost effective
| Characteristic | Specification |
| Appearance | Clear, Light yellow |
| Viscosity | 64 - 65 cP |
| pH | 3.5 |
| Specific gravity | 1.02 @ 75F |
Dosage
The treat rate of the NOMUL is 1.0 – 2.0% by volume in the brine. Testing with the produced crude is recommended to optimize treatment.
Performance Testing
Compatibility tests conducted with standard non-emulsion tests in which a 50/50 mixture of crude oil and selected brine (with and without NOMUL) was mixed under low-shear conditions in a glass bottle and allowed to stand in a hot water-bath at 150° F.
For these tests, compatibility is defined by a 95% phase separation within 30 min at a specified temperature. In addition, brine wettability is evaluated by observing the interaction of the brine and the surface of the glass bottle. Poor wettability is considered evident if the brine "clings" to the glass and does not freely move along its surface. The interface between brine and oil is also inspected, whereby the most effective system is one providing the most distinct phase separation.
Brines tested were 9.5 ppg NaCl, 12.0 NaBr, 11.0 ppg CaCl2 and 13.0 ppg CaBr2. Texas Raw Crude was used for the oil phase. All samples were treated with 1% diluted NOMUL. The results are shown below.
Emulsion tendency controlled with NOMUL treatment.
Storage and Handling
NOMUL is available in 55 gallon drums and 330 gallon totes. As with any industrial chemical, avoid prolonged contact with skin and eyes. In case of skin or eye contact, flush the exposed area with copious amounts of water. A safety data sheet outlining proper handling of this product is available upon request.
Availability
Global from Houston, TX-USA, Midland, TX-USA, Dubai, UAE, and Mumbai, India.
Also please see NE118 Non Emulsifier for use in acidizing
Manufacturers:
Finoric LLC
Beasley
Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
E-mail: info@finoric.com
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.