Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Malic Acid USP BP FCC Food Grade Supplier, Manufacturer's Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Malic Acid Suppliers
USP BP FCC Food Grade Suppliers
Malic acid is an organic compound with the formula HO2CCH2CHOHCO2H. It is a dicarboxylic acid that is made by all living organisms, contributes to the pleasantly sour taste of fruits, and is used as a food additive. Malic acid has two stereoisomeric forms (L- and D-enantiomers), though only the L-isomer exists naturally. Malic acid, when added to food products, is denoted by E number E296. Malic acid is the source of extreme tartness in USA-produced confectionery, the so-called extreme candy. It is also used with or in place of the less sour citric acid in sour sweets. CAS Number 617-48-1 & 6915-15-7.
Malic Acid USP Grade
Hydroxybutanedioic acid, (±)-.
(±)-Hydroxysuccinic acid [CAS Number 617-48-1].
Malic Acid contains not less than 99.0 percent and not more than 100.5 percent of C4H6O5.
Identification: Infrared Absorption 197K , on undried specimen.
Residue on ignition: not more than 0.1%.
Water-insoluble substances: Dissolve 25 g in 100 mL of water, filter the solution through a tared filtering crucible, wash the filter with hot water, and dry at 100 to constant weight: the increase in weight is not more than 25 mg (0.1%).
Heavy metals: 0.002%.
Fumaric and maleic acids: To pass the test. Not more than 1.0% of fumaric acid and not more than 0.05% of maleic acid are found.
Organic volatile impurities: meets the requirements.
Assay: Transfer about 2 g of Malic Acid, accurately weighed, to a conical flask, dissolve in 40 mL of recently boiled and cooled water, add PhPh TS, and titrate with 1 N sodium hydroxide VS to the first appearance of a faint pink color that persists for not less than 30 seconds. Each mL of 1 N sodium hydroxide is equivalent to 67.04 mg of C4H6O5.
Malic Acid BP Grade Ph Eur
C4H6O5 --- 134.1 --- CAS Number 6915-15-7
Action and use: Excipient.
Content: 99.0 per cent to 101.0 per cent (anhydrous substance).
Appearance: White or almost white, crystalline powder.
Solubility: Freely soluble in water and in alcohol, sparingly soluble in acetone.
A. Melting point: 128°C to 132°C.
B. Infrared absorption spectrophotometry.
Solution S: Dissolve 5.00 g in water R and dilute to 25 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Optical rotation: - 0.10° to + 0.10°, determined on solution S.
Water-insoluble substances: Maximum 0.1 per cent.
Related substances: Liquid chromatography (2.2.29).
Limits: (Please see the original monograph)
impurity A: not more than twice the area of the corresponding peak in the chromatogram obtained with reference solution (b) (1.0 per cent);
impurity B: not more than 0.25 times the area of the corresponding peak in the chromatogram obtained with reference solution (b) (0.05 per cent);
any other impurity: for each impurity, not more than 0.5 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.1 per cent);
total of other impurities: not more than 2.5 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.5 per cent);
disregard limit: 0.1 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.02 per cent).
Heavy metals: Maximum 20 ppm.
Water: Maximum 2.0 per cent, determined on 1.00 g.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Dissolve 0.500 g in 50 ml of carbon dioxide-free water R. Titrate with 1 M sodium hydroxide determining the end-point potentiometrically. 1 ml of 1 M sodium hydroxide is equivalent to 67.05 mg of C4H6O5.
Specified impurities A, B. (Please see the original monograph)
R' --- COOH --- R
A. R = CO2H, R' = H: (E)-butenedioic acid (fumaric acid),
B. R = H, R' = CO2H: (Z)-butenedioic acid (maleic acid).
Malic Acid FCC Food Grade
DL-Malic Acid; Hydroxysuccinic Acid;
C4H6O5 Formula wt 134.09
INS: 296 CAS: [CAS Number 617-48-1]
Malic Acid occurs as a white or nearly white, crystalline powder or granules having a strongly acid taste. One gram dissolves in 0.8 mL of water and in 1.4 mL of alcohol. Its solutions are optically inactive. It melts at about 130°C.
Function: Acidifier; flavoring agent.
Identification: The infrared absorption spectrum of a neat dispersion of the sample between two potassium bromide plates exhibits maxima only at the same wavelengths as those of a similar preparation of USP Malic Acid Reference Standard.
Assay: Not less than 99.0% and not more than 100.5% of C4H6O5.
Fumaric Acid: Not more than 1.0%.
Lead: Not more than 2 mg/kg.
Maleic Acid: Not more than 0.05%.
Optical (Specific) Rotation [α]25°/D: Between −0.10° and +0.10°.
Residue on Ignition: Not more than 0.1%.
Water-Insoluble Matter: Not more than 0.1%.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
16 March, 2022