Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Magnesium & Zinc Peroxide Supplier, Manufacturer's Representative, CAS Number 1335-26-8 and 1314-22-3
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000 HACCP.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Magnesium Peroxide Suppliers
For MSDS Sheet Click MSDS SDS of Zinc Peroxide Suppliers
Magnesium & Zinc Peroxide
CAS Number 1335-26-8 and 1314-22-3 Suppliers
General Specifications of Magnesium Peroxide
CAS Number 1335-26-8
Magnesium Peroxide 35% to 40%
Chloride Cl: 0.030%
Sulphate SO4: 0.3%
Heavy metals (As Pb): 0.003%
Appearance: Light yellow to white fine powder.
Magnesium Peroxide BP Ph Eur Grade
Mixture of magnesium peroxide and magnesium oxide.
Content: 22.0 per cent to 28.0 per cent of MgO2.
Appearance: White or slightly yellow, amorphous, light powder.
Solubility: Practically insoluble in water and in ethanol (96 per cent). It dissolves in dilute mineral acids.
A. Dissolve about 15 mg in 2 mL of dilute nitric acid and neutralise with dilute sodium hydroxide solution. The solution gives the reaction of magnesium.
B. Dissolve 0.1 g in 2 mL of dilute sulfuric acid and dilute to 10 mL with water. Shake 1 mL of this solution with 5 mL of ether and 0.5 mL of potassium dichromate solution. The ether layer is blue.
Solution S1: Dissolve cautiously 5.0 g in 40 mL of hydrochloric acid. Cautiously evaporate the solution to 10 mL and dilute to 100 mL with a mixture of equal volumes of acetic acid and distilled water. Filter, if necessary, through a previously ignited and tared porcelain or silica filter crucible of suitable porosity to give a clear filtrate. Keep the residue for the test for acid insoluble substances.
Solution S2: Dilute 5 mL of solution S1 to 25 mL with distilled water R.
Appearance of solution: Solution S1 is not more intensely coloured than reference solution.
Acidity or alkalinity: To 2.0 g add 100 mL of carbon dioxide-free water and heat to boiling for 5 min. Filter whilst hot through a sintered-glass filter, allow to cool and dilute to 100 mL with carbon dioxide-free water. To 15 mL of the filtrate, add 0.1 mL of phph solution. The solution is red. Not more than 0.2 mL of 0.1 M hydrochloric acid is necessary to change the colour of the indicator. Keep the filtrate for the test for soluble substances.
Acid insoluble substances: Maximum 0.1 per cent.
Soluble substances: Maximum 1.5 per cent.
Chlorides: Maximum 0.1 per cent.
Sulfates: Maximum 0.5 per cent.
Arsenic: Maximum 4 ppm, determined on 5 mL of solution S1.
Calcium: Maximum 1.0 per cent.
Iron: Maximum 500 ppm.
Heavy metals: Maximum 30 ppm.
Dissolve 80.0 mg, shaking cautiously, in a mixture, previously cooled to 20C, of 10 mL of sulfuric acid and 90 mL of water. Titrate with 0.02 M potassium permanganate until a pink colour is obtained.
1 mL of 0.02 M potassium permanganate is equivalent to 2.815 mg of MgO2.
Specifications of Zinc Peroxide
Synonym: Zinc Superoxide
CAS Number 1314-22-3
Molecular Formula: ZnO2
Molecular Weight: 97.4
Description: An off-white to yellowish white color powder.
Solubility: Practically insoluble in water and organic solvents. Soluble in mineral acids.
Chloride: Max. 50ppm
Sulfate: Max. 50ppm
Active Oxygen: Min. 9.0%
Purity: 60 % minimum for regular grade. 80% minimum for premium grade.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
16 March, 2022