Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Lithium Carbonate USP BP Ph Eur Supplier, Manufacturer's Representative, CAS Number 554-13-2
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Lithium Carbonate Suppliers
CAS Number 554-13-2 USP BP Ph Eur Suppliers
Lithium Carbonate USP Grade
Li2CO3 --- 73.89
Carbonic acid, dilithium salt.
Dilithium carbonate -- CAS 554-13-2.
Lithium Carbonate contains not less than 99.0 percent of Li2CO3, calculated on the dried basis.Identification:
A: It effervesces upon the addition of an acid, yielding a colorless gas which, when passed into calcium hydroxide, immediately causes a white precipitate to form.
B: When moistened with hydrochloric acid, it imparts an intense crimson color to a nonluminous flame.
Reaction: A saturated solution is alkaline to litmus.
Loss on drying: Dry it at 200 for 4 hours: it loses not more than 1.0% of its weight.
Insoluble substances: Transfer 10 g to a 250-mL beaker, add 50 mL of water, then add slowly 50 mL of 6 N hydrochloric acid. Cover with a watch glass, and boil the solution for 1 hour. Filter the solution through a dried, tared filtering crucible fitted with a glass-fiber filter disk, using suction. Wash the filter with hot water until the last washing is free from chloride when tested with. Dry the crucible in an oven at 110 for 1 hour: the weight of the residue is not more than 0.02% of the weight of Lithium Carbonate taken.
Chloride: To 500 mg of it add 1.2 mL of nitric acid, dilute with water to 50 mL, and add 1 mL of silver nitrate any turbidity formed is not greater than that produced in a similarly treated control solution containing 0.50 mL of 0.020 N hydrochloric acid (0.07%).
Sulfate: Dissolve 1.0 g in 10 mL of 3 N hydrochloric acid, dilute with water to 40 mL, and add 1 mL of barium chloride. Prepare a standard solution of equal volume containing 1.0 mL of 0.020 N sulfuric acid, 1 mL of 3 N hydrochloric acid, and 1 mL of barium chloride. The turbidity produced in the test solution, after 3 minutes, is not greater than that produced in the standard solution (0.1%).
Aluminum and iron: Dissolve 500 mg in 10 mL of water by the dropwise addition, with agitation, of hydrochloric acid. Boil the solution, then cool it, and to 5 mL of the solution add 6 N ammonium hydroxide until the reaction is alkaline: no turbidity or precipitate is observed.
Calcium: Suspend 5.0 g in 50 mL of water, and add a slight excess of 3 N hydrochloric acid. Boil the clear solution to expel carbon dioxide, add 5 mL of ammonium oxalate, render alkaline with 6 N ammonium hydroxide, and allow to stand for 4 hours. Filter through a filtering crucible, and wash with warm water until the last washing yields no turbidity with calcium chloride. Place the crucible in a beaker, cover it with water, add 3 mL of sulfuric acid, heat to 70 , and titrate with 0.10 N potassium permanganate to a pale pink color that persists for 30 seconds. Not more than 3.76 mL of 0.10 N potassium permanganate is consumed (0.15%).
Sodium: the sodium limit is 0.1%.
Heavy metals: the limit is 0.002%.
Lithium Carbonate BP Grade Ph Eur
Li2CO3 --- 73.9 --- CAS 554-13-2
Content: 98.5 per cent to 100.5 per cent.
Appearance: White or almost white powder.
Solubility: Slightly soluble in water, practically insoluble in ethanol (96 per cent).
A. When moistened with hydrochloric acid, it gives a red colour to a non-luminous flame.
B. Dissolve 0.2 g in 1 ml of hydrochloric acid. Evaporate to dryness on a water-bath. The residue dissolves in 3 ml of ethanol (96 per cent).
C. It gives the reaction of carbonates.
Solution S: Suspend 10.0 g in 30 ml of distilled water and dissolve by the addition of 22 ml of nitric acid. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 100 ml with distilled water.
Appearance of solution: Solution S is clear and colourless.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 200 ppm.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Magnesium: Maximum 150 ppm.
Potassium: Maximum 300 ppm.
Sodium: Maximum 300 ppm.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
11 July, 2020