 |
 Call Toll-Free: 1-855-FINORIC Houston, Midland & Pleasanton, Texas, USA. Email: info@finoric.com |
- 
- 
Search our website here:
Finotreat FeS, Iron Sulfide Scale Inhibitor Supplier Manufacturers and Manufacturer's Representative for Fracturing
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
For MSDS SDS of Finotreat FeS, Iron Sulfide Scale Inhibitor Manufacturers Please write to us.
Spanish Inhibidor de la Escala de Sulfuro de Hierro
Russian Ингибитор уровня сульфида железа
Iron Sulfide Scale Inhibitor
Finotreat FeS, Fracking or Fracturing Aid Suppliers
DESCRIPTION
FINOTREAT FeS is a specially designed, novel polymeric based scale inhibitor used in the control of sulfide based mineral scales in the oilfield environment.
APPLICATION
FINOTREAT FeS has been specifically developed to deal with severe sulfide scaling problems. It shows high levels of inhibition and has excellent thermal stability, tolerant to waters containing high levels of divalent metal ions.
FINOTREAT FeS should be used on a continual injection basis to control scale in topside facilities and other water systems where scale can cause problems. It should be injected neat into the flowing stream of liquid as far upstream of the problem causing area as possible.
ADVANTAGE
Field proven, FINOTREAT FeS offers the following advantages:
High performance with significant advantages over existing chemistries, such as THPS and Acrolein
Dissolves existing iron sulfide deposits at low (continuous injection) concentrations
Improved economics over existing continuous treatments
Effective over a broad range of temperature, pressure and salinity conditions
TYPICAL PROPERTIES*
Appearance: Opaque liquid
Specific Gravity @ 20C: 1.04 to 1.08
pH Neat: 2.0 to 3.0
Viscosity @ 25C: 100 to 200 cP
Flash Point: >200F (>93C)
*These do not constitute a specification.
| Corrosion Rate** (mm/yr) | Elastomer/Thermoplastic Compatibility*** | |||||||
| C1018 | 304SS | AISI 316L | HNBR | Viton A | Neoprene | Nitrile | PTFE | Nylon 11 |
| 0.871 | 0.022 | <0.002 | B | B | B | B | A | A |
| Rating | Volumetric Swelling | Description of Attack |
| A | < 10 % in 28 days | Excellent, little or no swelling / surface deterioration |
| B | < 20 % in 28 days | Good chemical resistance/ minor attack/swelling/deterioration |
| C | < 40 % in 28 days | Limited chemical resistance/ moderate attack. Conditional service |
| D | > 40 % in 28 days | Severe attack/ not recommended |
DOSAGE
FINOTREAT FeS will typically be injected at a dose rate of 5 to 200 ppm, dependent on the precipitating ion concentration and system conditions.
HANDLING
Please consult product Safety Data Sheet for full advice on handling and actions on the event of spillage or personnel exposure. FINOTREAT FeS is an industrial chemical, therefore good working practices should be adhered to at all times when handling this product. Chemical workers coveralls, safety glasses / goggles and chemically resistant gloves should be worn at all times. If skin or eye irritation persists following contact, seek medical attention.
AVAILABILITY
Beasley Houston Texas and Midland Texas
Manufacturers:
Finoric LLC
Beasley
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Email: info@finoric.com
Most products offered from our Houston & Midland Texas area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll
manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.