Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Hydrated Sodium Glycerophosphate BP Ph Eur Supplier, Manufacturer's Representative, CAS Number 1334-74-3 or 55073-41-1
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000 HACCP.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Hydrated Sodium Glycerophosphate Suppliers
Hydrated Sodium Glycerophosphate
CAS Number 1334-74-3 or 55073-41-1 BP Ph Eur Suppliers
Hydrated Sodium Glycerophosphate BP Grade
C3H7Na2O6P, xH2O - 216.0 (anhydrous substance)
CAS Number 1334-74-3 or 55073-41-1
Mixture of variable proportions of sodium (2RS)-2,3-dihydroxypropyl phosphate and sodium 2-hydroxy-1-(hydroxy methyl)ethyl phosphate. The degree of hydration is 4 to 6.
Content: 98.0 per cent to 102.0 per cent (anhydrous substance).
Appearance: White or almost white, crystalline powder or crystals.
Solubility: Freely soluble in water, practically insoluble in acetone and in alcohol.
A. Solution S (see Tests) gives reaction (a) of sodium.
B. To 0.1 g add 5 ml of dilute nitric acid R. Heat to boiling and boil for 1 min. Cool. The solution gives reaction (b) of phosphates.
C. In a test-tube fitted with a glass tube, mix 0.1 g with 5 g of potassium hydrogen sulphate. Heat strongly and direct the white vapor into 5 ml of decolorized fuchsin solution. A violet-red color develops which becomes violet upon heating for 30 min on a water-bath.
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension II (and not more intensely colored than reference solution.
Alkalinity: To 10 ml of solution S add 0.2 ml of PhPh solution. Not more than 1.0 ml of 0.1 M hydrochloric acid is required to change the color of the indicator.
Glycerol and alcohol-soluble substances: Maximum 1.0 per cent.
Shake 1.000 g with 25 ml of alcohol R for 10 min. Filter. Evaporate the filtrate on a water-bath and dry the residue at 70 °C for 1 h. The residue weighs not more than 10 mg.
Chlorides: Maximum 200 ppm.
Phosphates: Maximum 0.1 per cent.
Sulfates: Maximum 500 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 20 ppm.
Water: 25.0 per cent to 35.0 per cent, determined on 0.100 g.
Dissolve 0.250 g in 30 ml of water. Titrate with 0.05 M sulfuric acid , determining the end-point potentiometrically.
Calculate the percentage content of sodium glycerophosphate (anhydrous substance) from the expression:
216(n1-n2/4)a = percentage content of water,
n1 = volume of 0.05 M sulfuric acid used in the assay, in milliliters,
n2 = volume of 0.1 M hydrochloric acid used in the test for alkalinity, in milliliters,
m = mass of the substance to be examined, in grams
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
16 March, 2022