Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Hydrated Manganese Glycerophosphate FCC Food & BP Ph Eur Grade Supplier, Manufacturer's Representative, CAS Number 1320-46-3
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Hydrated Manganese Glycerophosphate Suppliers
Hydrated Manganese Glycerophosphate
CAS Number 1320-46-3 FCC Food BP Ph Eur Grade Suppliers
Manganese Glycerophosphate FCC Food Grade
C3H7MnO6P·xH2O Formula wt, anhydrous 225.00
Manganese Glycerophosphate occurs as a white or pink-white powder. One gram dissolves in about 5 mL of 1:4 citric acid solution. It is slightly soluble in water, and is insoluble in alcohol.
Identification: A 1:20 solution in 2.7 N hydrochloric acid gives positive tests for Manganese.
Assay: Not less than 98.0% and not more than 100.5% of C3H7MnO6P after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 12.0%.
Hydrated Manganese Glycerophosphate BP Ph Eur Grade
C3H7MnO6P,xH2O -- 225.0
Mixture of variable proportions of hydrated manganese (II) (2RS)-2,3-dihydroxypropyl phosphate and hydrated manganese (II) 2-hydroxy-1-(hydroxymethyl)ethyl phosphate.
Content: 97.0 per cent to 102.0 per cent (dried substance).
Appearance: White or pale pink, hygroscopic powder.
Solubility: Practically insoluble in water and in ethanol (96 per cent). It is freely soluble in dilute mineral acids.
A. Mix 1 g with 1 g of potassium hydrogen sulphate R in a test tube fitted with a delivery tube. Heat strongly and direct the white vapour towards a piece of filter paper impregnated with a freshly prepared 10 g/l solution of sodium nitroprusside R. The filter paper develops a blue colour in contact with piperidine.
B. Disperse 50 mg in 5 ml of water R. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed that dissolves on the addition of 1 ml of acetic acid R.
C. Ignite 0.1 g in a crucible. Take up the residue with 5 ml of nitric acid R and heat on a water-bath for 1 min. Filter. The filtrate gives reaction (b) of phosphates.
Solution S: Dissolve 5.0 g in 20 ml of dilute hydrochloric acid. Filter if necessary. Add dilute ammonia until a precipitate is formed. Dissolve the precipitate by adding the minimum quantity needed of dilute hydrochloric acid and dilute to 100 ml with distilled water.
Glycerol and ethanol (96 per cent)-soluble substances: Maximum 1.0 per cent.
Shake 1.00 g with 25 ml of ethanol (96 per cent) for 1 min. Filter. Evaporate the filtrate to dryness on a water-bath and dry the residue at 70 °C for 1 h. The residue weighs a maximum of 10 mg.
Chlorides: Maximum 0.15 per cent.
Phosphates: Maximum 0.3 per cent.
Sulphates: Maximum 0.2 per cent.
Iron: Maximum 50 ppm.
Heavy metals: Maximum 20 ppm.
Loss on drying: Maximum 12.0 per cent, determined on 1.000 g by drying in an oven at 105 °C for 4 h.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
13 July, 2020