Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Ferrous Fumarate or Iron Fumarate USP BP FCC Food Grade Supplier, Manufacturer's Representative, CAS Number 141-01-5
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Ferrous Fumarate or Iron Fumarate Suppliers
Iron Fumarate USP BP FCC Food Grade CAS 141-01-5 Suppliers
Iron (II) fumarate or Ferrous fumarate, is the iron (II) salt of fumaric acid, occurring as a reddish-orange powder, used to supplement iron intake. It has the chemical formula C4H2FeO4.
Ferrous Fumarate USP Grade
C4H2FeO4 --- 169.90
2-Butenedioic acid, (E)-, iron(2+) salt.
Iron(2+) fumarate CAS 141-01-5.
Ferrous Fumarate contains not less than 97.0 percent and not more than 101.0 percent of C4H2FeO4, calculated on the dried basis.
A: To 1.5 g add 25 mL of dilute hydrochloric acid (1 in 2). Dilute with water to 50 mL, heat to dissolve, then cool, filter on a fine-porosity, sintered-glass crucible, wash the precipitate with dilute hydrochloric acid (3 in 100), saving the filtrate for Identification test B, and dry the precipitate at 105C: the IR absorption of a potassium bromide dispersion of the dried precipitate so obtained exhibits maxima only at the same wavelengths as that of a similar preparation of USP Fumaric Acid RS.
B: A portion of the filtrate obtained in the preceding test responds to the tests for Iron.
Loss on drying: Dry it at 105C for 16 hours: it loses not more than 1.5% of its weight.
Sulfate: Transfer 1.0 g to a 250-mL beaker, add 100 mL of water, and heat on a steam bath, adding hydrochloric acid drop wise, until complete solution is effected (about 2 mL of the acid will be required). Filter the solution if necessary, and dilute the filtrate with water to 100 mL. Heat the filtrate to boiling, add 10 mL of barium chloride TS, warm on a steam bath for 2 hours, cover, and allow to stand for 16 hours. (If crystals of ferrous fumarate form, warm the solution on the steam bath to dissolve them.) Pass the solution through ash less filter paper, wash the residue with hot water until, with the addition of ammonium sulfide TS, a black precipitate is no longer formed in the filtrate, and transfer the paper containing the residue to a tared crucible. Char the paper, without burning, and ignite the crucible and its contents at 600 to constant weight: each mg of residue is equivalent to 0.412 mg of SO4. Not more than 0.2% is found.
Arsenic: Transfer 2.0 g to a beaker, and add 10 mL of water and 10 mL of sulfuric acid. Warm to precipitate the fumaric acid completely, cool, add 30 mL of water, and filter into a 100-
mL volumetric flask. Wash the precipitate with water, adding the washings to the flask, add water to volume, and mix. Transfer 50.0 mL of this solution into the arsine generator flask, and dilute with water to 55 mL: the resulting solution meets the requirements of the test, the addition of 20 mL of 7 N sulfuric acid specified for Procedure being omitted. The limit is 3 ppm.
Limit of ferric iron: Transfer 2.0 g, accurately weighed, to a glass-stoppered, 250-mL conical flask, add 25 mL of water and 4 mL of hydrochloric acid, and heat on a hot plate until solution is complete. Insert the stopper in the flask, and cool to room temperature. Add 3 g of potassium iodide, insert the stopper in the flask, swirl to mix, and allow to stand in the dark for 5 minutes. Remove the stopper, add 75 mL of water, and titrate with 0.1 N sodium thiosulfate VS, adding 3 mL of starch TS as the end-point is approached. Not more than 7.16 mL of 0.1 N sodium thiosulfate is consumed (2.0%).
Limit of lead: To pass the atomic absorption spectrophotometer test. The Test solution does not exceed that of the Standard solution (0.001%).
Mercury: To pass the test of 3 µg per g.
Ferrous Fumarate BP Grade Ph Eur
C4H2FeO4 --- 169.9 --- CAS 141-01-5
Iron (II) (E)-butenedioate.
Content: 93.0 per cent to 101.0 per cent (dried substance).
Appearance: Fine, reddish-orange or reddish-brown powder.
Solubility :Slightly soluble in water, very slightly soluble in ethanol (96 per cent).
A. Thin-layer chromatography.
B. Mix 0.5 g with 1 g of resorcinol R. To 0.5 g of the mixture in a crucible add 0.15 ml of sulphuric acid R and heat gently. A dark red semi-solid mass is formed. Add the mass, with care, to 100 ml of water R. An orange-yellow colour develops and the solution shows no fluorescence.
C. The filtrate obtained during preparation of the test solution in identification test A gives reaction (a) of iron (2.3.1).
Solution S :Dissolve 2.0 g in a mixture of 10 ml of lead-free hydrochloric acid R and 80 ml of water R, heating slightly if necessary. Allow to cool, filter if necessary and dilute to 100 ml with water R.
Sulphates: Maximum 0.2 per cent.
Arsenic: Maximum 5 ppm.
Ferric ion: Maximum 2.0 per cent.
Cadmium: Maximum 10.0 ppm.
Chromium: Maximum 2.00 × 102 ppm.
Lead: Maximum 20.0 ppm.
Mercury: Maximum 1.0 ppm.
Nickel: Maximum 2.00 × 102 ppm.
Zinc: Maximum 5.00 × 102 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105°C.
Dissolve with slight heating 0.150 g in 7.5 ml of dilute sulphuric acid R. Cool and add 25 ml of water R. Add 0.1 ml of ferroin R. Titrate immediately with 0.1 M cerium sulphate until the
colour changes from orange to light bluish-green. 1 ml of 0.1 M cerium sulphate is equivalent to 16.99 mg of C4H2FeO4.
Ferrous Fumarate FCC Food Grade
Iron (II) Fumarate FCC
C4H2FeO4 --- Formula weight 169.90 --- CAS: 141-01-5
Ferrous Fumarate occurs as a red-orange to red-brown powder. It may contain soft lumps that produce a yellow streak when crushed. It is soluble in water and in alcohol.
A. Add 25 mL of 1:2 hydrochloric acid to about 1.5 g of sample, and dilute to 50 mL with water. Heat to effect complete solution; then cool; filter on a fine-porosity, sintered glass crucible; wash the precipitate with 2:100 hydrochloric acid, saving the filtrate for Identification Test B; and dry the precipitate at 105°C. Add 3 mL of water and 7 mL of 1 N sodium hydroxide to 400 mg of the dried precipitate, and stir until solution is complete. Add, drop wise, 2.7 N hydrochloric acid until the solution is just acid to litmus; add 1 g of pnitrobenzyl
bromide and 10 mL of alcohol; and reflux the mixture for 2 h. Cool, filter, and wash the precipitate with two small portions of a 2:1 alcohol:water mixture, followed by two small portions of water. The precipitate, recrystallized from hot alcohol and dried at 105°C, melts at about 152°C.
B. A portion of the filtrate obtained in Identification Test A gives positive tests for Iron.
Assay: Not less than 97.0% and not more than 101.0% of C4H2FeO4, calculated on the dried basis.
Ferric Iron: Not more than 2.0%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 1.5%.
Mercury: Not more than 3 mg/kg.
Sulfate: Not more than 0.2%.
We manufacture and supply directly compressible Ferrous Fumarate or Iron Fumarate.
We also manufacture and supply Micro-Encapsulated Ferrous Fumarate or Iron Fumarate, having core of Ferrous Fumarate and coating of vegetable oil or mono and diglycerides or as desired by the buyer.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
3 January, 2021