 |
 Call Toll-Free: 1-855-FINORIC Houston, Midland & Pleasanton, Texas, USA. Email: info@finoric.com |
- 
- 
Search our website here
Low and High Temperature Diverting Agent Supplier Manufacturers for Fracturing
CAS number 9051-89-2, EINECS EC code number --, Molecular Weight --, Chemical Formula --
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
MSDS Sheet Click MSDS of Diverting Agent Manufacturers Later
Spanish Agente de desvío de la fractura
Russian Перелом переадресации агента
We manufacture both Low Temperature and High Temperature Diverting Agents
Diverting Agent
Fracking or Fracturing Acid
DA-355: Degradable Diverting Agent For High Temperature
DESCRIPTION
DA-355 is a high molecular weight polymer designed to be used as a flow diverting agent for use in stimulation
applications in oil and gas fractures. DA-355 can be used with acids, linear & cross linked gels and slickwater for
high temperature applications.
DA-355 is used for sealing perforations, existing fractures and natural fractures. It can be used to protect producing zones during work-over operations. It permits treatment of zones with porosity differences and separates the total treatment zone into stages. DA-355 diverting agent is offered in tight particle size distributions like 10/30, 30/70, 70/120 or mixtures thereof. Larger sized particles permit bridging and smaller sized particles bridge across the larger particles, forming a low permeability zone.
DA-355 is extremely poorly soluble in water below 140 deg F. At formation temperatures above 175 deg F, DA-355 will hydrolyze in to water and condensate soluble products. Typical half life of DA-355 is 2 weeks at bottom hole conditions.
DA-355 will bridge perforations and slots as wide as 0.35 inches. Typical usage is between 10 to 20 lbs per perforation.
BENEFITS
Helps distribute treating fluids uniformly in the zone
Helps control gels to perform multiple fractures
Dissolves completely post treatment, leaving no residue behind
Can be used up to 355 deg F Bottom Hole Temperatures
TYPICAL PHYSICAL PROPERTIES - SPECIFICATIONS
Appearance: White Solid
Specific Gravity: ~1.25
PACKAGING
50 lb bags; 1,000 lb supersacks
REGULATORY INFORMATION
Not DoT regulated for transport. Refer MSDS before use.
COMPATIBILITY
DA-355 is compatible with all known frac fluids. A compatibility test is
advised before use with anionic and amphoteric additives.
AVAILABILITY
Global from Houston, TX-USA, Midland, TX-USA, Dubai, UAE, & Mumbai, India
DA-LT: Low Temperature Diverting Agent
DESCRIPTION
DA-LT is a diverting agent for use in stimulation applications. DA-LT can be used
with acids, linear gels and slickwater for high temperature applications. Compatibility
tests are needed with cross-linked gels, as DA-LT might delay the crosslinking time.
DA-LT is used for sealing existing fractures and natural fractures. It can be used to protect producing zones during workover operations. It permits treatment of zones with porosity differences and separates the total treatment zone into stages. DA-LT diverting agent is offered in tight particle size distributions or mixtures thereof. Larger sized particles permit bridging and smaller sized particles bridge across the larger particles, forming a low permeability zone.
DA-LT is extremely poorly soluble in water below 90 deg F. At formation temperatures between 90 and 175 deg F, DA-LT will slowly dissolve in water and condensate.
DA-LT will soon be offered in a PSD for re-fracs, to bridge perforations and slots as wide as 0.35 inches.
DA-LT is added on the fly, be offered in a PSD for re-fracs, to bridge perforations and slots as wide as 0.35 inches.
BENEFITS
Helps distribute treating fluids uniformly in the zone
Helps control fluid distribution to perform multiple fractures
Dissolves completely post treatment, leaving no residue behind
Can be used up to 150 deg F BHT
TYPICAL LOADING RECOMMENDATIONS
BHT @#
90 deg F DA-LT 16-32 lbs per 1000 ga fluid
BHT @ 120 deg F DA-LT 23-46 lbs per 1000 ga fluid
BHT @ 150 deg F DA-LT 23-46 lbs per 1000 ga fluid
BHT @ 175 deg F DA-LT 120-240 lbs per 1000 ga fluid
PACKAGING
50 lb bags; 1,000 lb supersacks
COMPATIBILITY
DA-LT is compatible with all known frac fluids.
AVAILABILITY
Global from Houston, TX-USA, Midland, TX-USA, Dubai, UAE, & Mumbai, India
We also offer Encapsulated Breakers, encapsulated/extended release Scale Inhibitors
Diverting Agent Manufacturers:
Finoric LLC
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Email: info@finoric.com
Most products offered from our Houston & Midland Texas area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs at our Houston facility on toll
manufacturing basis.
We are looking for Technical Sales Representatives in New York and Los Angeles Area.