Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Potassium Hydroxide or Caustic Potash Pellets Powder Flakes Tablets Briquettes and Walnut Supplier, USP NF BP ACS Reagent FCC Food Grade Manufacturer's Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Potassium Hydroxide or Caustic Potash Suppliers
Caustic Potash Pellets Powder Flakes USP NF BP FCC Food ACS Reagent Suppliers
Potassium Hydroxide USP NF
Potassium Hydroxide, Caustic Potash
KOH 56.11 --- [1310-58-3].
Potassium Hydroxide contains not less than 85.0 percent of total alkali, calculated as KOH, including not more than 3.5 percent of K2CO3.
Identification: A solution (1 in 25) responds to the tests for Potassium.
Insoluble substances: Dissolve 1 g in 20 mL of water: the solution is complete, clear, and colorless.
Heavy metals: Dissolve 0.67 g in a mixture of 5 mL of water and 7 mL of 3 N hydrochloric acid. Heat to boiling, cool, and dilute with water to 25 mL: the limit is 0.003%.
Potassium Hydroxide BP
KOH -- 56.11 -- 1310-58-3
Potassium hydroxide contains not less than 85.0 per cent and not more than the equivalent of 100.5 per cent of total alkali, calculated as KOH.
White, crystalline, hard masses, supplied as sticks, pellets or irregularly shaped pieces, deliquescent in air, hygroscopic, absorbing carbon dioxide, very soluble in water, freely soluble in alcohol.
A. Dissolve 0.1 g in 10 ml of water (this solution is used for identification test B). Dilute 1 ml of the solution to 100 ml with water. The pH of this solution is not less than 10.5.
B. 1 ml of the initial solution prepared in identification test A gives reaction of potassium.
Solution S1: Dissolve 2.5 g in 10 ml of water. Carefully add 2 ml of nitric acid, with cooling, and dilute to 25 ml with dilute nitric acid.
Solution S2: Dissolve 10 g in 15 ml of distilled water. Carefully add 12 ml of hydrochloric acid, with cooling, and dilute to 50 ml with dilute hydrochloric acid.
Appearance of solution: Dissolve 5 g in carbon dioxide-free water and dilute to 50 ml with the same solvent. The solution is clear and colourless.
Carbonates: Not more than 2.0 per cent, calculated as K2CO3.
Chlorides: Dilute 10 ml of solution S1 to 15 ml with water. The solution complies with the limit test for chlorides (50 ppm).
Phosphates: Dilute 5 ml of solution S1 to 100 ml with water. The solution complies with the limit test for phosphates (20 ppm).
Sulphates: 15 ml of solution S2 complies with the limit test for sulphates (50 ppm).
Aluminium: If intended for use in the manufacture of hem dialysis solutions, it complies with the test for aluminium. Dissolve 20 g in 100 ml of water and add 10 ml of acetate buffer solution pH 6.0. The solution complies with the limit test for aluminium (0.2 ppm). Use as the reference solution a mixture of 2 ml of aluminium standard solution (2 ppm Al), 10 ml of acetate buffer solution pH 6.0 and 98 ml of water. To prepare the blank use a mixture of 10 ml of acetate buffer solution pH 6.0 R and 100 ml of water.
Iron: Dilute 5 ml of solution S2 to 10 ml with water R. The solution complies with the limit test for iron (10 ppm).
Sodium: Not more than 1.0 per cent of Na, determined by atomic absorption spectrometry.
Heavy metals: Dilute 10 ml of solution S2 to 20 ml with water. 12 ml of the solution complies with limit test A for heavy metals (10 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Potassium Hydroxide FCC Food Grade
KOH Formula wt 56.11
INS: 525 CAS: [1310-58-3]
Potassium Hydroxide occurs as white or nearly white pellets, flakes, sticks, fused masses, or other forms. Upon exposure to air, it readily absorbs carbon dioxide and moisture, and it deliquesces. One gram dissolves in 1 mL of water, in about 3 mL of alcohol, and in about 2.5 mL of glycerin. It is very soluble in boiling alcohol.
Function: pH control.
Identification: A 1:25 aqueous solution gives positive tests for Potassium.
Assay: Not less than 85.0% and not more than 100.5% of total alkali, calculated as KOH.
Carbonate (as K2CO3): Not more than 3.5%.
Insoluble Substances: Passes test.
Lead: Not more than 2 mg/kg.
Mercury: Not more than 0.1 mg/kg.
Potassium Hydroxide ACS Analytical Reagent
Formula Wt 56.11
CAS Number 1310-58-3
NOTE. Reagent potassium hydroxide usually contains 10-15% water.
Assay and potassium carbonate: 85% KOH and 2.0% K2CO3
Chloride (Cl): 0.01%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.003%
Ammonium hydroxide precipitate: 0.02%
Heavy metals (as Ag): 0.001%
Iron (Fe): 0.001%
Nickel (Ni): 0.001%
Sodium (Na): 0.05%
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
4 July, 2020