Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Calcium Gluconate Powder USP BP Ph Eur FCC Food Grade Supplier, Manufacturer's Representative, CAS Number 299-28-5 for anhydrous or 18016-24-5 for monohydrate
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000 HACCP.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Calcium gluconate Suppliers
CAS Number 299-28-5 for anhydrous or 18016-24-5 for monohydrate USP BP Ph Eur FCC Food Grade Suppliers
Calcium Gluconate USP Grade
C12H22CaO14 (anhydrous) 430.37
D-Gluconic acid, calcium salt (2:1).
Calcium D-gluconate (1:2) CAS number 299-28-5.
Calcium Gluconate is anhydrous or contains one molecule of water of hydration. The anhydrous form contains not less than 98.0 percent and not more than 102.0 percent of C12H22CaO14, calculated on the dried basis. The monohydrate form contains not less than 99.0 percent and not more than 101.0 percent of C12H22CaO14H2O where labeled as intended for use in preparing injectable dosage forms, and not less than 98.5 percent and not more than 102.0 percent of C12H22CaO14H2O where not intended for use in
preparing injectable dosage forms.
A: A solution (1 in 50) responds to the test for Calcium.
B: Chromatographic plate test.
Loss on drying: Dry it at 105 for 16 hours: the anhydrous form loses not more than 3.0% of its weight; the monohydrate form, where labeled as intended for use in preparing injectable dosage forms, loses not more than 1.0% of its weight, and where not intended for use in preparing injectable dosage forms loses not more than 2.0% of its weight.
Chloride: A 1.0-g portion shows no more chloride than corresponds to 0.07 mL of 0.020 N hydrochloric acid (0.005%). Where it is not intended for use in the preparation of injectable dosage forms, a 1.0-g portion shows no more chloride than corresponds to 1 mL of 0.020 N hydrochloric acid (0.07%).
Limit of oxalate: Calcium Gluconate not intended for use in the preparation of injectable dosage forms is exempt from this requirement. For details please see the original monograph.
Limit of phosphate: To pass the test.
Sulfate: To pass the test.
Arsenic: The limit is 3 ppm.
Heavy metals: 0.001%. [Where Calcium Gluconate not intended for use in the preparation of injectable dosage forms, the limit is 0.002%.]
Limit of magnesium and alkali metals: (0.4%). [NOTE—Calcium Gluconate not intended for use in preparing injectable dosage forms is exempt from this requirement.]
Limit of iron: The limit is 5 ppm. [NOTE—Calcium Gluconate labeled as not intended for use in the preparation of injectable dosage forms is exempt from this requirement.]
Reducing substances: the limit is 1.0%.
Calcium Gluconate FCC Food Grade
C12H22CaO14 Formula weight, anhydrous 430.38
C12H22CaO14·H2O Formula weight, monohydrate 448.39
CAS number anhydrous 299-28-5
Calcium Gluconate occurs as white, crystalline granules or powder. It is anhydrous or contains one molecule of water of hydration. It is stable in air. One gram dissolves slowly in about 30 mL of water at 25° and in about 5 mL of boiling water. It is insoluble in alcohol and in many other organic solvents. Its solutions are neutral to litmus.
Function: Firming agent; stabilizer; texturizer.
A. A 1:50 aqueous solution gives positive tests for Calcium.
B. Chromatographic test.
Assay: Anhydrous: Not less than 98.0% and not more than 102.0% of C12H22CaO14, calculated on the dried basis; Monohydrate: Not less than 98.0% and not more than 102.0% of
C12H22CaO14·H2O, calculated on the as-is basis.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 3.0%; Monohydrate: Not more than 2.0%.
Sucrose and Reducing Sugars: Not more than 1.0%.
Calcium Gluconate BP Grade Ph Eur
C12H22CaO14,H2O --- 448.4 --- CAS 18016-24-5
Calcium D-gluconate monohydrate.
Content: 98.5 per cent to 102.0 per cent of C12H22CaO14,H2O.
Appearance: White or almost white, crystalline or granular powder.
Solubility: Sparingly soluble in water, freely soluble in boiling water.
A. Thin-layer chromatography.
B. Solution S (see Tests) gives the reactions of calcium.
Solution S: Dissolve 1.0 g in water R heated to 60 °C and dilute to 50 ml with the same solvent.
Appearance of solution: At 60 °C, solution S is not more intensely coloured than reference solution. After cooling, it is not more opalescent than reference suspension.
Organic impurities and boric acid: To pass the test.
Sucrose and reducing sugars: To pass the test.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 100 ppm.
Magnesium and alkali metals: Maximum 0.4 per cent.
Heavy metals: Maximum 10 ppm.
Microbial contamination: Total viable aerobic count not more than 103 micro-organisms per gram, determined by plate count.
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
16 March, 2022