 |
 Call Toll-Free: 1-855-FINORIC Houston + Midland + Pleasanton, Texas, USA Also Oklahoma, OK and Williston, ND USA. Email: ask@finoric.com |
- 
- 
Search our website here:
Benzyl Benzoate USP BP Supplier, Manufacturer's Representative, CAS Number 120-51-4
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Benzyl Benzoate Suppliers
Benzyl Benzoate
CAS 120-51-4 USP BP Suppliers
Specifications of Benzyl Benzoate USP Grade:
C14H12O2 212.24
Benzoic acid, phenylmethyl ester.
Benzyl benzoate --- 120-51-4.
Benzyl Benzoate contains not less than 99.0 percent and not more than 100.5 percent of C14H12O2.
Packaging and storage: Preserve in tight, well-filled, light-resistant containers, and avoid exposure to excessive heat.
Identification:
Specific gravity: between 1.116 and 1.120.
Congealing temperature: not lower than 18C. Congelation may be brought about by addition of a fragment of previously congealed Benzyl Benzoate when the temperature has reached the expected congealing temperature.
Refractive index: between 1.568 and 1.570 at 20 .
Aldehyde: Transfer 10.0 g to a 125-mL conical flask containing 50 mL of alcohol and 5 mL of hydroxylamine hydrochloride solution (3.5 in 100), mix, and allow to stand for 10 minutes. Add 1 mL of bromophenol blue and titrate with 0.1 N sodium hydroxide to a light green endpoint. Perform a blank determination and match the color of the endpoint with that of the titrated test solution. The net volume of 0.1 N sodium hydroxide consumed does not exceed 0.50 mL (0.05% as benzaldehyde).
Acidity: Add 2 drops of PhPh to 25 mL of alcohol and add 0.020 N sodium hydroxide until a pink color is produced. Add 5.0 g of Benzyl Benzoate, mix, and titrate with 0.020 N sodium hydroxide: not more than 1.5 mL of 0.020 N sodium hydroxide is required to restore the pink color.
Assay: Transfer about 2 g of Benzyl Benzoate, accurately weighed, to a conical flask fitted with a reflux condenser, add 50.0 mL of 0.5 N alcoholic potassium hydroxide and boil gently for 1 hour. Cool, add PhPh and titrate with 0.5 N hydrochloric acid. Perform a blank determination. Each mL of 0.5 N alcoholic potassium hydroxide is equivalent to 106.1 mg of C14H12O2.
Benzyl Benzoate BP Grade
Ph Eur
C14H12O2 -- 212.2 -- 120-51-4
DEFINITION
Phenylmethyl benzoate.
Content: 99.0 per cent to 100.5 per cent.
CHARACTERS
Appearance: Colourless or almost colourless crystals or colourless or almost colourless, oily liquid.
Solubility: Practically insoluble in water, miscible with ethanol (96 per cent), with methylene chloride and with fatty and essential oils.
IDENTIFICATION
First identificationı A.
Second identificationı B, C.
A. Infrared absorption spectrophotometry. Comparison Ph. Eur. reference spectrum of benzyl benzoate.
B. To 2 g add 25 ml of alcoholic potassium hydroxide solution and boil under a reflux condenser for 2 h. Remove the ethanol on a water-bath, add 50 ml of water and distill. Collect about 25 ml of distillate and use it for identification test C. Acidify the liquid remaining in the distillation flask with dilute hydrochloric acid. A white precipitate is formed that, when washed with water and dried in vacuum melts at 121C to 124C.
C. To the distillate obtained in identification test B add 2.5 g of potassium permanganate and 5 ml of dilute sodium hydroxide solution. Boil under a reflux condenser for 15 min, cool and filter. Acidify the filtrate with dilute hydrochloric acid. A white precipitate is formed that, when washed with water and dried in vacuum, melts at 121C to 124C.
TESTS
Acidity: Dissolve 2.0 g in ethanol (96 per cent) R and dilute to 10 ml with the same solvent. Titrate with 0.1 M sodium hydroxide using PhPh solution R as indicator. Not more than 0.2 ml is required to change the colour of the indicator to pink.
Relative density: 1.118 to 1.122.
Refractive index: 1.568 to 1.570.
Freezing point: Minimum 17C.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
ASSAY: To 2.000 g add 50.0 ml of 0.5 M alcoholic potassium hydroxide and boil gently under a reflux condenser for 1 h. Titrate the hot solution with 0.5 M hydrochloric acid using 1 ml of PhPh solution as indicator. Carry out a blank determination. 1 ml of 0.5 M alcoholic potassium hydroxide is equivalent to 106.1 mg of C14H12O2.
Suppliers, Manufacturer's Representative:
Finoric LLC
Beasley
Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Email: ask@finoric.com
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.