Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Ammonium Molybdate Tetrahydrate or Ammonium Heptamolybdate Tetrahydrate USP ACS Reagent Supplier, Manufacturer's Representative, CAS Number 12027-67-7, 12054-85-2, 13106-76-8
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Ammonium Molybdate Tetrahydrate or Ammonium Heptamolybdate Tetrahydrate Suppliers
Ammonium Molybdate Tetrahydrate
CAS Number 12027-67-7, 12054-85-2, 13106-76-8 Ammonium Heptamolybdate Tetrahydrate Suppliers USP ACS Reagent Suppliers
Ammonium Molybdate USP
Molybdate (Mo7O24 6 ), hexaammonium, tetrahydrate.
Hexaammonium molybdate tetrahydrate CAS 12054-85-2.
Ammonium Molybdate contains not less than 99.3 percent and not more than 101.8 percent of (NH4)6Mo7O244H2O.
Identification: Dissolve 0.6 g of it in 1.4 mL of water and 1.45 mL of ammonium hydroxide. Cool this mixture, and add slowly, with mixing, 7.2 mL of a well-cooled mixture of 3.2 mL of nitric acid and 4 mL of water. Allow to stand for 24 to 48 hours, and filter through a sintered-glass filter. To 5 mL of the filtrate add 2 mL of dibasic sodium phosphate TS: a yellow precipitate is formed, and it is soluble in an excess of 6 N ammonium hydroxide.
Insoluble substances: Dissolve 20 g in 200 mL of water in a beaker, heat to boiling, cover, and heat on a steam bath for 1 hour. Filter the hot solution through a tared filtering crucible, wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 1 mg (0.005%).
Chloride: Maximum 0.002%.
Limit of nitrate: To pass the test.
Sulfate: Maximum 0.02%.
Arsenate, phosphate, and silicate: To pass the test.
Phosphate: Maximum 5 ppm.
Magnesium and alkali salts: Maximum 0.02%.
Heavy metals: The limit is 10 µg per g.
Assay: Dissolve about 1 g of Ammonium Molybdate, accurately weighed, in a mixture of 10 mL of water and 1 mL of ammonium hydroxide in a 250-mL volumetric flask, dilute with water to volume, and mix. Filter the solution, and transfer 50.0 mL of the filtrate to a 600-mL beaker. Add 250 mL of water, 20 g of ammonium chloride, 15 mL of hydrochloric acid, and 0.15 mL of methyl orange TS, heat nearly to boiling, and add 18 mL of lead acetate TS. To the hot solution add, slowly and with constant stirring, a saturated solution of ammonium acetate until the color turns yellow, and then add 15 mL of lead acetate TS. Cover the beaker, and heat just below the boiling temperature until the precipitate has settled. Filter through a tared, porous porcelain crucible, wash with seven or eight successive portions of a mixture of water, saturated ammonium acetate solution, and nitric acid (890:100:10), and finally wash with three successive portions of hot water. Ignite to constant weight at 560C to 625C. Each mg of the lead molybdate so obtained is equivalent to 0.4809 mg of (NH4)6Mo7O244H2O.
Ammonium Molybdate Tetrahydrate ACS AR Analytical Reagent grade
Ammonium Heptamolybdate Tetrahydrate
Formula Wt 1235.86
CAS Number 12027-67-7
Assay (as MoO3): 81.0-83.0%
Insoluble matter: 0.005%
Chloride (Cl): 0.002%
Nitrate (NO3): Passes test
Arsenate, phosphate, and silicate (as SiO2): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.02%
Heavy metals (as Pb): 0.001%
Magnesium (Mg): 0.005%
Potassium (K): 0.002%
Sodium (Na): 0.01%
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
8 July, 2020