Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Adipic Acid USP NF BP FCC Food Grade Supplier, Manufacturer's Representative, CAS Number 124-04-9
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India, UAE and China we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
For MSDS Sheet Click MSDS SDS of Adipic Acid Suppliers
CAS 124-04-9 Hexanedioic acid USP NF BP FCC Food Grade Suppliers
Adipic acid or Hexanedioic acid is the organic compound with the formula (CH2)4(COOH)2. Adipic acid otherwise rarely occurs in nature, but it is known as manufactured E number food additive E355. Adipic acid has been incorporated into controlled-release formulation matrix tablets to obtain pH-independent release for both weakly basic and weakly acidic drugs. significant amounts of adipic acid are used as a food ingredient as a flavorant and gelling aid.
Adipic Acid USP NF Grade
C6H10O4 --- 146.1
1,4-Butanedicarboxylic acid [CAS 124-04-9].
Adipic Acid contains not less than 99.0 percent and not more than 101.0 percent of C6H10O4, calculated on the dried basis.
Packaging and storage: Preserve in a tight container. No storage requirements specified.
Identification: Infrared Absorption 197K .
Melting range: between 151C and 154C.
Loss on drying: Dry it at 105C to constant weight: it loses not more than 0.2% of its weight.
Residue on ignition: not more than 0.1%.
Limit of nitrates: To pass the test
Chloride: A 5-mL portion of the Test solution from the Limit of nitrates test shows no more chloride than a corresponding 0.14-mL portion of 0.020 N hydrochloric acid: the limit is 0.02%.
Sulfate: A 5-mL portion of the Test solution from the Limit of nitrates test shows no more sulfate than a corresponding 0.26-mL portion of 0.020 N sulfuric acid: the limit is 0.05%.
Iron: Use a 10-mL portion of the Test solution from the Limit of nitrates test: the limit is 0.001%.
Heavy metals: 0.001%.
Assay: Dissolve 60 mg of Adipic Acid in 50 mL of water. Add 0.2 mL of PhPh, and titrate with 0.1 N sodium hydroxide VS to a permanent pale pink endpoint. Each mL of 0.1 N sodium hydroxide is equivalent to 7.31 mg of C6H10O4.
Adipic Acid FCC Food Grade
Hexanedioic Acid; 1,4-Butanedicarboxylic Acid
C6H10O4 Formula wt 146.14
INS: 355 CAS: [124-04-9]
Adipic Acid occurs as white crystals or a crystalline powder. It is not hygroscopic. It is freely soluble in alcohol, soluble in acetone, and slightly soluble in water.
Function: Buffer; neutralizing agent.
Assay: Not less than 99.6% and not more than 101.0% of C6H10O4, calculated on the anhydrous basis.
Lead: Not more than 2 mg/kg.
Melting Range: Between 151.5° and 154°.
Residue on Ignition: Not more than 0.002%.
Water: Not more than 0.2%.
Adipic Acid BP Grade
C6H10O4 --- 146.1 --- 124-04-9
Action and use: Excipient.
Content: 99.0 per cent to 101.0 per cent (dried substance).
Appearance: White or almost white, crystalline powder.
Solubility: Sparingly soluble in water, soluble in boiling water, freely soluble in alcohol and in methanol, soluble in acetone.
A. Melting point: 151C to 154C.
B. Infrared absorption spectrophotometry.
Solution S: Dissolve 5.0 g with heating in distilled water and dilute to 50 ml with the same solvent. Allow to cool and to crystallise. Filter through a sintered-glass filter (40). Wash the filter with distilled water. Collect the filtrate and the washings until a volume of 50 ml is obtained.
Appearance of solution: The solution is clear and colourless.
Dissolve 1.0 g in methanol R and dilute to 20 ml with the same solvent.
Related substances: Liquid chromatography To pass the test.
Chlorides: Maximum 200 ppm.
Nitrates: Maximum 30 ppm.
Sulphates: Maximum 500 ppm.
Iron: Maximum 10 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 0.2 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulphated ash: Maximum 0.1 per cent.
Dissolve 60.0 mg in 50 ml of water. Add 0.2 ml of PhPh solution and titrate with 0.1 M sodium hydroxide. 1 ml of 0.1 M sodium hydroxide is equivalent to 7.31 mg of C6H10O4.
A. R = CH2-CO2H: pentanedioic acid (glutaric acid),
B. R = CO2H: butanedioic acid (succinic acid),
C. R = [CH2]3-CO2H: heptanedioic acid (pimelic acid).
Suppliers, Manufacturer's Representative:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
We offer chemicals for industrial, laboratory and research use only. We are not drug dispensers or pharmacist. Our suppliers offer pharmaceutical grade products, manufactured under proper control for use in industries only.
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Inorganic Chemicals Aluminum Chloride Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Butyrate Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Diacetate Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Zinc Ammonium Chloride Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers
4 January, 2021