Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Sodium Metabisulfite Supplier and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India and Dubai we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP, GLP certified, ISO-9001:2015 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Sodium Metabisulfite BP USP FCC ACS Manufacturers
Sodium Metabisulfite MSDS
Assay as Na2S2O5 Not less than 97.0% Na2S2O5 Insoluble matter 0.005% max Appearance White Chloride (Cl) 0.05% Thiosulfate (S2O3) 0.05% Heavy metals (as Pb) 10 ppm Iron (Fe) 50 ppm
Sodium Metabisulfite USP NF
Na2S2O5 -- 190.11
Disulfurous acid, disodium salt.
Disodium pyrosulfite [7681-57-4]
Sodium Metabisulfite contains an amount of Na2S2O5 equivalent to not less than 65.0 percent and not more than 67.4 percent of SO2.
Identification: A solution (1 in 20) responds to the tests for Sodium 191 and for Sulfite.
Limit of chloride: Dissolve 1.0 g in 10 mL of water, filter, if necessary, through a small chloride free filter, and add 6 mL of 30 percent hydrogen peroxide. Add 1 N sodium hydroxide until the solution is slightly alkaline to phenolphthalein, dilute with water to 100 mL, and mix. Dilute 2.0 mL of this solution with water to 20 mL, and add 1 mL of nitric acid and 1 mL of silver nitrate TS. Mix, allow to stand for 5 minutes protected from direct sunlight, and compare the turbidity, if any, with that produced from a 2-mL aliquot of a control (prepared by diluting 0.71 mL of 0.020 N hydrochloric acid to 100 mL) in an equal volume of total solution containing the quantities of reagents used in the test : any turbidity produced by the test specimen does not exceed that of the control preparation (0.05%).
Iron: the limit is 0.002%.
Limit of thiosulfate: Mix 2.2 g with 10 mL of 1 N hydrochloric acid in a 50-mL beaker. Boil gently for 5 minutes, cool, and transfer to a small test tube. Any turbidity is not greater than that produced by 0.10 mL of 0.10 N sodium thiosulfate, similarly treated (0.05%).
Heavy metals: the limit is 0.002%.
Sodium Metabisulfite FCC Food Grade
Na2S2O5 Formula wt 190.11
INS: 223 CAS: [7681-57-4]
Sodium Metabisulfite occurs as colorless crystals or as a white to yellow, crystalline powder. It is freely soluble in water and slightly soluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant.
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Sulfite.
Assay: Not less than 90.0% and not more than 100.5% of Na2S2O5.
Iron: Not more than 10 mg/kg.
Lead: Not more than 2 mg/kg.
Selenium: Not more than 5 mg/kg.
Sodium Metabisulfite Analytical Reagent
Formula Weight 190.11
CAS Number 7681-57-4
Assay: 97% Na2S2O5 minimum MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.05%
Thiosulfate (S2O3): 0.05%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.002%.
Sodium Metabisulfite Uses
Reducing agents for the chemical, pharmaceutical, photographic, textile industries and as food additives.
Auxiliary for water and sewage treatment.
Bleach for the paper and pulp industry.
Auxiliary for the film and photographic industry.
Sodium Metabisulfite Uses (Food)
Bleaching agent (e.g. candies, cake) loose agent (e.g. bread, cracker, etc).
Antiseptic and germicide (e.g. fruit juice, tinned food, etc).
Inhibitor and freshening agent (e.g. day lily, seafood, fruit and vegetable, etc).
Sodium Metabisulfite Manufacturers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Galvanizing Chemicals Ammonium Chloride Acid Inhibitor & Fume Suppressant and Flux Enhancer Barium Chloride Zinc Chloride Zinc Ammonium Chloride, Galvanizing Flux
Inorganic Chemicals Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate. Calcium Formate Calcium D Saccharate Glucarate Calcium Nitrate, Calcium Nitrite Chromic Chloride Cupric or Copper Chloride Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Formate Sodium Metabisulfite Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Anhydrous Sodium Thiosulfate Pentahydrate Zinc Ammonium Chloride, Galvanizing Flux Zinc Carbonate Zinc Chelate Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers Phase Change Material PCM Manufacturers for AC Air Condition, Electronics, Refrigerated Transport etc. Deicer Anti icing Snow melting
4 January, 2021