Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Sodium Acetate Trihydrate USP BP FCC Food ACS Analytical Reagent grade Supplier and Manufacturers' Represantative
CAS: 6131-90-4 (Trihydrate); EINECS: --; Molecular Weight: 136.08; Chemical Formula: CH3COO-Na.3H2O
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Sodium Acetate Anhydrous
Sodium Acetate Trihydrate MSDS
Sodium Acetate BP USP FCC Food Grade Manufacturers
Spanish Trihidrato de acetato de sodio anhidro
Sodium Acetate Trihydrate
Technical & Pure ACS Reagent AR
BP USP FCC Food Grade Suppliers
GRADES AND SPECIFICATIONS OF SODIUM ACETATE TRI-HYDRATE CRYSTALS.
SPECIFICATIONS SODIUM ACETATE COMMERCIAL TRIHYDRATE PURE Assay 99% Sodium Acetate Trihydrate minimum Appearance White Transparent Crystalline Test Solution A 10% Solution is clear & colourless pH 7.5-9 Arsenic Less than 1 ppm Calcium & Magnesium Less than 50 ppm >Heavy Metals Less than 1 ppm Iron Less than 5ppm Chlorides Less than 0.03% Sulphates Less than 0.02% Packing As required
We also offer Sodium Acetate USP BP FCC Food Grade from a world class FDA approved, ISO-9001-2008, ISO-22000-2005 HACCP Certified facility with Kosher & Halal approval.
Sodium Acetate USP Grade Specifications
Assay: Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Labeling: Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification: A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying: Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter: Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride: A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate: A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium: To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium: Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis: the limit is 0.2µ =g per g.
Heavy metals: the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Sodium Acetate Trihydrate BP Grade Specifications
Sodium ethanoate trihydrate.
Content: 99.0 per cent to 101.0 per cent (dried substance).
Appearance: Colourless crystals.
Solubility: Very soluble in water, soluble in ethanol (96 per cent).
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances: Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 200 ppm.
Aluminium: Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium: Maximum 50 ppm, calculated as Ca.
Heavy metals: Maximum 10 ppm.
Iron: Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying: 39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.
Sodium Acetate FCC Food Grade, US Food Chemical Codex Grade Specifications
C2H3NaO2 Formula wt, anhydrous 82.03
C2H3NaO2·3H2O Formula wt, trihydrate 136.08
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.
Sodium Acetate Anhydrous ACS Analytical Reagent Grade Specifications
Sodium Acetate Anhydrous
Formula Wt 82.03
CAS Number 127-09-3
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Acetate Trihydrate ACS Analytical Reagent Grade Specifications
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4
Assay: 99.0-101% NaC2H3O2 . 3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%
Sodium Acetate Trihydrate USP BP FCC Food ACS Analytical Reagent Grade Manufacturers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Galvanizing Chemicals Ammonium Chloride Acid Inhibitor & Fume Suppressant and Flux Enhancer Barium Chloride Zinc Chloride Zinc Ammonium Chloride, Galvanizing Flux
Inorganic Chemicals Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate. Calcium Formate Calcium D Saccharate Glucarate Calcium Nitrate, Calcium Nitrite Chromic Chloride Cupric or Copper Chloride Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Potassium Chloride Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Formate Sodium Metabisulfite Sodium Nitrate, Sodium Nitrite Sodium Thiosulfate Anhydrous Sodium Thiosulfate Pentahydrate Zinc Ammonium Chloride, Galvanizing Flux Zinc Carbonate Zinc Chelate Zinc Chloride Zinc Sulfate Chemical Toll Manufacturers Deicer Anti icing Snow melting
19 August, 2018