Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here
Sodium Butyrate SDS MSDS Sheet, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Sodium Butyrate Manufacturers Specifications
MSDS Sheet of Sodium Butyrate
Sodium Butyrate SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
Butyric Acid Sodium Salt MSDS
1. Product Identification
Synonyms: Sodium Butyrate; Sodium Butanoate
CAS No.: 156-54-7
Molecular Weight: 111.11
Chemical Formula: CH3CH2CH2COOHNa
Recommended usage: Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Germ cell mutagenicity Category 2
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements
GHS Label Elements
Signal Word: Warning
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H341 Suspected of causing genetic defects.
Precautionary statements: P308+P313, P405, P501
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P332+313: If skin irritation occurs: Get medical advice/attention.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P337+313: If eye irritation persists get medical advice/attention.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xn Harmful Xi Irritant
3. Composition/Information on Ingredients
Ingredient: Sodium Butyrate or Butyric Acid, Sodium Salt
CAS No.: 156-54-7
Percent: 90 - 100%
4. First Aid Measures
Inhalation: If Sodium Butyrate is inhaled, remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing & Shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Sodium Butyrate is not expected to be a fire hazard.
Explosion: No information found.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water.
7. Handling and Storage
Keep Sodium Butyrate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Sodium Butyrate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Sodium Butyrate is white to off-white powder.
Odor: Light odor.
Solubility: Appreciable (> 10%)
Specific Gravity: 0.96
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: No information found.
10. Stability and Reactivity
Stability: Sodium Butyrate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition. Toxic fumes of the contained metal may be released when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong acids.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Investigated as a mutagen.--------\Cancer Lists\--- -------------------- -------------------- ----------------------------- ---NTP Carcinogen--- Ingredient ----------------- Known - Anticipated - IARC Category ---------------------------- ----- - ----------- - ------------- Butyric Acid, Sodium Salt -- No ------- No ---------- None (156-54-7) Sodium Butyrate
Mutagenic Effects: Classified POSSIBLE for human.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Not dangerous goods
Not dangerous goods
15. Regulatory Information
USA Federal and State Regulations:
TSCA 8(b) inventory: Butyric Acid, Sodium Salt
TSCA: Butyric Acid, Sodium Salt (156-54-7) ----- Yes
SARA 302: Butyric Acid, Sodium Salt (156-54-7) - No SARA 313: Butyric Acid, Sodium Salt (156-54-7) - No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No; Reactivity: No (Pure / Solid)
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
WHMIS (Canada): CLASS D-2B: Material causing other toxic effects (TOXIC).
Canada DSL: Butyric Acid, Sodium Salt (156-54-7)- Yes
Canada NDSL: Butyric Acid, Sodium Salt (156-54-7)- No
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
HMIS (Perceived): Health Hazard: 2, Fire Hazard: 1, Reactivity: 0, Personal Protection: E
NFPA (Perceived): Health: 2, Flammability: 1, Reactivity: 2
16. Other Information
EINECS EC Number: 205-857-6
European Labeling in Accordance with EC Directives
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
H341 = Suspected of causing genetic defects.
Xn = Harmful
Xi = Irritant
R36/37/38 = Irritating to eyes, respiratory system and skin.
R68 = Possible risk of irreversible effects.
Prepared by AJK on 20 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Sodium Butyrate Manufacturers:
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland, TX area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.
Inorganic Chemicals Aluminum Chloride Hexahydrate Anhydrous Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium Butyrate Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate. Calcium Formate Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Nitrate, Calcium Nitrite Calcium Oxide Mono Di Tri Calcium Phosphate Calcium Propionate Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Citrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Phosphorous Acid Potassium Chloride Mono Di Tri Potassium Phosphate Potassium Nitrate Potassium Permanganate Potassium Persulfate Potassium Peroxy monopersulfate Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Citrate Sodium Diacetate Sodium Formate Sodium Metabisulfite Sodium Nitrate, Sodium Nitrite Sodium Persulfate Sodium Propionate Sodium Thiosulfate Anhydrous Sodium Thiosulfate Pentahydrate Vanadium Chloride Zinc Acetate Zinc Ammonium Chloride, Galvanizing Flux Zinc Carbonate Zinc Chelate Zinc Chloride Zinc Sulfate Zirconyl Chloride Chemical Toll Manufacturers
Sodium Butyrate Suppliers Manufacturers, Exporters, Importers
30 March, 2018