Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Polycarboxylate Superplasticizer SDS MSDS Sheet, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
C Specifications of Manufacturers
MSDS Sheet of Polycarboxylate Superplasticizer Manufacturers
SDS MSDS Sheet Polycarboxylate-based Superplasticizer Material Safety Data Sheet
1. Product Identification
Product Name: Polycarboxylate-based Superplasticizer
Synonyms: Polycarboxylate acid
Recommended usage: Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May be slightly harmful if inhaled.
May cause mild skin irritation.
May cause mild respiratory irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
European Listing according to EC Directives:
Classification according to Directive 67/548/EEC or 1999/45/EC: Not classified hazardous.
Caution: The substance is not fully tested.
3. Composition/Information on Ingredients
Chemical Name: Polycarboxylate in water
CAS No.: 9084-06-4, Some website quote it differently.
4. First Aid Measures
Eyes:: Flush with water for at least 15 minutes. If irritation occurs and persists, obtain medical attention.
Skin: Remove contaminated clothing and thoroughly wash with soap and water. If irritation occurs and persists, contact a medical doctor.
Ingestion: If conscious, rinse mouth with water. Dilute by giving 1 or 2 glasses of water. Do no induce vomiting. Get medical attention immediately.
Inhalation: Remove to fresh air. If breathing difficulty or discomfort occurs and persists, obtain medical attention.
5. Fire Fighting Measures
Flash Point: Not applicable
Flammable Limits: Not applicable
Auto ignition Temperature: Not applicable
Extinguishing Media: Not applicable (aqueous solution)
Fire/Explosion Hazards: None
Hazardous Decomposition Products: Not applicable
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire Water can be used.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Sealed containers of 2-Phosphonobutane -1,2,4-Tricarboxylic Acid or PBTC may rupture when heated.
6. Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Evacuate personnel safe areas. Sweep up and place in suitable containers for recycle or disposal. Ensure adequate ventilation. Avoid dust formation. Avoid breathing dust. Shut off source of the leak only if it is easy to do so. Do not let product enter drains.
7. Handling and Storage
Handling: In accordance with good industrial practice, handle with care and avoid unnecessary personal contact. Wash thoroughly after handing. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoiding breathing dust. Keep away from sources of ignition. Avoid physical damage to containers. Keep all equipment clean and properly grounded to avoid static electricity discharge. Do not eat, drink or smoke while handing the product. Keep out of the reach of children.
Storage: Store in a cool, dry, well-ventilated away from incompatible substances. Store in a tightly closed container. Do not store in direct sunlight. Keep out of reach of children.
8. Exposure Controls/Personal Protection
Engineering Controls: None established
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Tan Color.
Vapor Pressure: NA
Boiling Point: NA
Freezing Point: -NA
Melting Point: NA
Pour Point: NA
Solubility: Soluble in water.
10. Stability and Reactivity
Conditions to Avoid: Incompatible material dust moisture high temperature
Polymerization: Will not occur
Hazardous Decomposition Products: None
Incompatible Materials: Oxidizing agents and alkalis.
11. Toxicological Information
The. product is not listed as a carcinogen
No other information found.
12. Ecological Information
No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with federal, state and local requirements.
14. Transport Information
USA Department of Transportation (DOT)
Canada Transport of Dangerous Goods
15. Regulatory Information
TSCA: Poly Carboxylate - No
SARA 302: Poly Carboxylate - No
SARA 311/312: Acute: No Chronic: No; Fire: No; Pressure: No; Reactivity: No
SARA 313: Poly Carboxylate - No
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
Canada DSL List: No
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
16. Other Information
Prepared by AJK on 20 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Polycarboxylate Superplasticizer Manufacturers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Organic Products BHA Butylated Hydroxyanisole BHT Butylated Hydroxy toluene Citric Acid Choline Chloride Disodium EDTA Erythorbic Acid Furfuryl Alcohol Hydrolyzed Polymaleic Anhydride HPMA Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Isatoic Anhydride Glycine Methyl & Dimethyl Anthranilate Maleic Acid Pentaerythritol Phosphonono butanetri carboxylic acid PBTC Pentaerythritol Picric Acid Polyquaternium WSCP Poly carboxylate Concrete strengthner Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Potassium Phthalimide Salicylic Acid Sodium Hydroxy methane sulfonate or Sodium Formaldehyde Bisulfite Sulfamic Acid TBHQ Tertiary Butyl Hydro Quinone.htm Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Poly carboxylate Superplasticizer Suppliers Manufacturers, Exporters, Importers
19 August, 2018