Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here
Methyl Anthranilate SDS MSDS Sheet, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Methyl & Dimethyl Anthranilate Manufacturers Specifications
MSDS of Methyl Anthranilate Manufacturers
MSDS of Dimethyl Anthranilate Manufacturers
Methyl Anthranilate SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Methyl 2-aminobenzoate, Methyl 2-anthranilate
CAS No.: 134-20-3
Molecular Weight: 151.16
Molecular Formula: C8H9NO2
Recommended usage: Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary statements: P362
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352-IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P362: Take off contaminated clothing and wash before reuse.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant R36/37/38
OSHA Hazards: Not considered highly hazardous by OSHA.
3. Composition/Information on Ingredients
Ingredient: Methyl Anthranilate
CAS No.: 134-20-3
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Combustible at high temperature..
Auto-Ignition Temperature: 530C (986F).
Flash Points: 104 deg C ( 219 deg F)
Flammable Limits: Not available.
Products of Combustion: Nitrogen oxides, Carbon dioxide, Carbon monoxide, fumes.
Fire: Flammable in the presence of open flame.
Explosion: Slightly explosive in presence of heat.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Avoid touching the spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Do not contaminate the environment.
7. Handling and Storage
Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Methyl Anthranilate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not Established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Methyl Anthranilate is a yellowish solid or liquid melting/freezing at 24C.
Odor: It has typical floral odor.
Solubility: It is slightly soluble in water.
Density: 1.17 g/mL at 20C (68F)
Molecular Weight: 151.16
Molecular Formula: C8H9NO2
% Volatiles by volume @ 21C (70F): -
Boiling Point: 256°C (492.8°F)
Melting Point: 24°C (75.2°F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Methyl Anthranilate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits Oxides of Nitrogen, Carbon dioxide, Carbon monoxide & Fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, reducing agents, Acid anhydrides, chloroformates, acids, acid chlorides.
Conditions to Avoid: Incompatibles, heat & light.
11. Toxicological Information
Harmful if inhaled or swallowed. Irritating to skin.
ORL-RAT LD50 2910 mg kg-1
ORL-MAM LD50 3900 mg kg-1
Carcinogenic Effects: Not know as carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Fate: Not available.
Environmental Toxicity: Not known. Toxicity to fish is expected.
BOD5 and COD: Not available.
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are toxic.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
US DOT Classification:
Canada TDG Classification:
15. Regulatory Information
Not considered highly hazardous by OSHA.
SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
No chemicals are reportable under Section 313.
SARA 311/312 Hazards
Component CAS # -.
Fire Hazard: -
Reactivity Hazard: -
Pressure Hazard: -
Immediate Health Hazard: Yes
Chronic Health Hazard: -
Massachusetts Right To Know Components
Pennsylvania Right To Know Components
New Jersey Right To Know Components
California prop. 65:
Contains no chemical subject to California Prop 65.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
listed on the TSCA Inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
Canada - DSL/NDSL
CAS# 128-37-0: is listed on Canada's DSL List.
Canada - WHMIS
Canadian Ingredient Disclosure List
CAS# 134-20-3 is not listed on Canada's Ingredient Disclosure List.
Health Hazard: 0
Fire Hazard: 1
Personal Protection: E
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
Australian Hazchem Code: -
Poison Schedule: -
16. Other Information
EINECS EC Number: 205-132-4
European Labeling in Accordance with EC Directives
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
Xi = Irritant
R36/37/38 Irritating to eyes, respiratory system and skin.
Prepared by AJK on 20 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Methyl Anthranilate Manufacturers:
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland, TX area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.
Organic Products BHA Butylated Hydroxyanisole BHT Butylated Hydroxy toluene Citric Acid Choline Chloride Disodium EDTA Erythorbic Acid Furfuryl Alcohol Hydrolyzed Polymaleic Anhydride HPMA Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Isatoic Anhydride Glycine Methyl & Dimethyl Anthranilate Maleic Acid Pentaerythritol Phosphonono butanetri carboxylic acid PBTC Pentaerythritol Picric Acid Polyquaternium WSCP Poly carboxylate Concrete strengthner Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Potassium Phthalimide Salicylic Acid Sodium Hydroxy methane sulfonate or Sodium Formaldehyde Bisulfite Sulfamic Acid TBHQ Tertiary Butyl Hydro Quinone.htm Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Methyl Anthranilate Suppliers, Manufacturers, Exporters, Importers
30 March, 2018