Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Glycine SDS MSDS Sheet, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Specifications of Glycine Manufacturers
MSDS Sheet of Glycine Manufacturers
Glycine SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Aminoacetic acid; 2-Aminoacetic acid; Aciport; Aminoethanoic acid; Glicoamin; Glycocoll; Glycolixir; Glycosthene
CAS No.: 56-40-6
EINECS EC Code: 200-272-2
Molecular Weight: 75.07
Chemical Formula: C2H5NO2
Recommended usage: Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: -
Hazards not otherwise classified (HNOC):
May cause mild skin irritation.
May cause mild eye irritation.
May cause mild respiratory irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
OSHA: Not highly hazardous.
3. Composition/Information on Ingredients
CAS No.: 56-40-6
4. First Aid Measures
Always seek medical advice after the first aid treatment.
Inhalation: If Glycine inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Flash point: 177C (350) closed cup.
Auto ignition temperature: NA
Combustible. High heat or direct flame is necessary to cause ignition. Toxic fumes and carbon monoxide and nitrogen oxides may be formed in fire.
Explosion: Above the flash point, explosive vapor-air mixtures may be formed.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide. Do not use a solid stream of water, since the stream will scatter and spread the fire. Water spray may be used to keep fire exposed containers cool.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Small Spill: Mop and pick up the material and place in an appropriate waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Avoid dust formation. Keep away from heat. Keep away from sources of ignition. Provide ventilation.
7. Handling and Storage
Keep away from heat and source of fire preferably in a ventilated area. Keep in tightly closed container. Do not breathe dust. Keep away from oxidizing material. Separate from oxidizing materials. Storage and use areas should be No Smoking areas. Containers of Glycine may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product. Store in a light resistant containers. Prevent any electrostatic discharge.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: TWA: 10 (mg/m3) from ACGIH (TLV) [United States] Inhalation Total. TWA: 5 (mg/m3) from OSHA (PEL) [United States] Inhalation Respirable. TWA: 15 (mg/m3) from OSHA (PEL) [United States] Inhalation Total. Consult local authorities for acceptable exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: White Crystals or Powder.
Solubility: miscible with water
Specific Gravity: 1.15
pH: 5.6 in 1% solution.
% Volatiles by volume @ 21C (70F): NA
Boiling Point: NA
Melting Point: - Starts decomposing at 233C.
Molecular Weight: 75.07
Molecular Formula: C2H5NO2
Vapor Density (Air=1): NA
Vapor Pressure (mm Hg): NA
Evaporation Rate (BuAc=1): -
10. Stability and Reactivity
Stability: Glycine is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides and toxic fumes may form when heated to decomposition.
Hazardous Polymerization: Not reported. However it can explode under certain conditions.
Incompatibilities: Acids, oxidizing agents, heat and sparks.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Oral rat LD50: 7930 mg/kg
Oral mouse LD50 4920 mg/kg
MUTAGENIC EFFECTS: NA.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Carcinogenicity: Glycine - Not listed as a carcinogen.
12. Ecological Information
Environmental Toxicity: NA
The product and the products of its degradation are not known to be toxic.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
15. Regulatory Information
OSHA: Not highly hazardous
TSCA 8(b) inventory: Glycine
TSCA Significant New Use Rule: None of the chemicals in this product have SNUR under TSCA.
Section 12b: None of the chemicals in this product are listed under TSCA Section 12b.
CERLA Hazardous Substances and Corresponding RQs: None of the chemicals in this product have an RQ.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals are under a Chemical Test Rule.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Fire Hazard, Acute Health Hazard, Chronic Health Hazard Sudden Release of Pressure Hazard, Reactive Hazard.
Clean Air Act: This material does not contain any hazardous air pollutants, Class 1 Ozone depletors, or Class 2 Ozone depletors.
Clean Water Act: None of the chemicals in this product are listed as Hazardous Substances, Priority Pollutants, or Toxic Pollutants under the CWA.
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
Australian Hazchem Code: -
Poison Schedule: -
WHMIS (Canada): Not controlled under WHMIS (Canada).
Canada - DSL/NDSL: CAS# 56-40-6 is listed on Canada's DSL List.
EINECS EC Code: 200-272-2
Hazard Symbols: None
Risk Phrases: -
Safety Phrases: S 22 Do not breath dust S 24/25 Avoid contact with skin and eyes.
Health Hazard: 1
Fire Hazard: 1
Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
16. Other Information
Prepared by AJK on 20 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Organic Products BHA Butylated Hydroxyanisole BHT Butylated Hydroxy toluene Citric Acid Choline Chloride Disodium EDTA Erythorbic Acid Furfuryl Alcohol Hydrolyzed Polymaleic Anhydride HPMA Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Isatoic Anhydride Glycine Methyl & Dimethyl Anthranilate Maleic Acid Pentaerythritol Phosphonono butanetri carboxylic acid PBTC Pentaerythritol Picric Acid Polyquaternium WSCP Poly carboxylate Concrete strengthner Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Potassium Phthalimide Salicylic Acid Sodium Hydroxy methane sulfonate or Sodium Formaldehyde Bisulfite Sulfamic Acid TBHQ Tertiary Butyl Hydro Quinone.htm Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Glycine Suppliers, Manufacturers, Exporters, Importers
19 August, 2018