Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, USA.
Search our website here:
Fast Hydrating Guar Gum Slurry SDS MSDS of Suppliers and Manufacturers' Representative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, offers chemicals for Oil & Gas Exploration, Hydraulic Fracturing, Production, Stimulation, Coiled Tubing, Food & Feed Ingredients, Mineral Fortifiers and Pharmaceutical Excipients, in 55 countries across 5 continents. Backed by company owned & operated full-fledged chemical manufacturing facilities in Pleasanton, Midland & Houston, Texas with associated manufacturing sites in India and UAE we are a truly multi-national chemical manufacturer and distributor.
Our services are 24/7 deliveries, including week-end deliveries, well site logistics in ISO tanks, logistics & warehousing across the US and world, sourcing from overseas, manufacturing overseas, quality control, OSHA, DoT & GHS compliance, etc.
Most of our or our partner facilities are either FDA-cGMP, ISO-9001, Halal and Kosher, ISO-14000, REACH, ISO-22000, and/or HACCP certified.
Specifications of Fast Hydrating Guar Gum Powder Slurry Granules for Fracturing
Specifications of Guar Gum Agglomerated Powder, Granule of Food Grade
MSDS SDS of Guar Gum Powder Granules
MSDS SDS of Guar Gum Slurry. You are here.
Guar Gum Slurry SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product: Guar Gum Slurry
CAS No.: Mixture
Molecular Weight: It is a mixture
Intended Use: Oil & Gas Wells fracturing and Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 5
Acute toxicity, inhalation Category 5
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H303: May be harmful if swallowed.
H333: May be harmful if inhaled.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P304+P312: IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
R20/22 Harmful by inhalation and if swallowed
For the full text of the H-statements & R-phrases mentioned in this Section, see Section 16.
3. Composition/Information on Ingredients
Chemical Name CAS# Percentage by Weight (%)
White Mineral Oil 8042-47-5 40-60%
Guar Powder 9000-30-0 40-60%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Auto-Ignition Temperature: NA.
Flash Points: NA.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: CO2, foam, dry chemicals.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool.
6. Accidental Release Measures
Small Spill: Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible, inorganic absorbent material, or sweep up, and remove to an approved disposal container. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Do not contaminate surface water. Prevent from entering sewers or drains. Spills may be slippery; use care to avoid falling.
7. Handling and Storage
Keep away from heat. Keep away from sources of ignition. Do not breathe mist. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat or smoke while handling. Respect good personal hygiene.
Avoid contact with skin and eyes. Avoid formation of mist and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation. If you feel unwell, seek medical attention. Spills may be slippery; use care to avoid falling.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Keep away from ignition sources and naked flame.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: It is tan colored liquid.
Density: Not available
% Volatiles by volume @ 21C (70F): -
Vapor Pressure: <01008 hPa (0.01 mm/ Hg)
Boiling Point: Not available
Melting Point: Not available
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. Avoid contact with strong acids, alkali or oxidizing agents..
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and unidentified compounds at elevated temperatures.
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, alkali or oxidizing agents..
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Toxicity to Animals: LD50: Not available. LC50: Not available.
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
12. Ecological Information
Environmental Fate: Based on available information the product will not bio accumulate.
Environmental Toxicity: The material is not considered as environmental hazard.
Sufficient information on the product is not available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT & ADR/RID: Not Regulated
IMDG: Not Regulated
IATA: Not Regulated
15. Regulatory Information
Section 16 - Additional Information
European Labeling in Accordance with EC Directives
H303: May be harmful if swallowed.
H333: May be harmful if inhaled.
Xn = Harmful
R20/22 Harmful by inhalation and if swallowed
Prepared by AJK on 23 January 2017 - Printed on: 8 April 2017
The information and recommendations set forth herein are presented in good faith and believed correct as of the date the SDS was created. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS MSDS is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Shale Gas Hydraulic Fracturing, Coil Tubing, Slick Water, Production, Stimulation, Well Intervention, Cementing Chemicals, Summary Line Card Ammonium Persulfate Acetic Acid Acid Viscosifier Acid Emulsifier Ammonium Bifluoride ATMP Phosphonate, Amino tris (methylene phosphonic acid) Barium Sulfate Remover BHMT Phosphonate or BHMTPMPA BME Iron Reducer or Dissolver Boron and Zirconium based Guar Cross Linkers Cement Defoamer Encapsulated Citric Acid Citric Acid Clay Stabilizer Corrosion Inhibitor Diverting Agent DETA diethylenetriamine penta(methylene phosphonic acid) Didecyl Dimethyl Ammonium Chloride Encapsulated Gel Breaker Fe46 - Iron Control Blend Flow Back Aid Foam 810 Foam418 - Heavy Crude Defoamer Friction Reducer Fast Hydrating Guar Gum Powder Granules Slurry Gel Sweep, FinoSweep Glutaraldehyde Solution Glycerin HP HT Lube Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Hydrogen Sulfide Scavenger Non Emulsifier Paraffin Dispersant Phthalic Acid Phthalic Anhydride Potassium chloride KCl substitute Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Scale Inhibitor Scalegone Solid - Scale Paraffin Asphaltene Inhibitor Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Xanthan Gum Slurry Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Potassium Chloride Zinc Chloride
28 September, 2021