Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Diverting Agent Supplier SDS MSDS Sheet of Manufacturers, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Diverting Agent Manufacturers Specifications
Fracking or Fracturing Acid
DA-355 SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet.
Section 1: Chemical Product and Identification
Product Name: Diverting Agent DA355, Biopolymer
Intended use: Oil & Gas Exploration and processing aid for industrial applications.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May Causes mild eye irritation.
Burning produces obnoxious & toxic fumes. Be careful.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Ingredients listed CAS No Content Polylactide 9051-89-2 >95%
This material has no know hazards.
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Thoroughly clean shoes and clothes before reuse. Get medical attention.
Inhalation: If IT is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately.
Notes to Physician: Treat symptomatically and supportively.
Section 5: Fire and Explosion Data
Flammability of the Product: Not a combustible product. As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Auto-Ignition Temperature: Not applicable.
Products of Combustion: Thermal decomposition may produce: fumes, aldehydes and carbon oxides (CO, CO2).
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. In the event of fire, wear self-contained breathing apparatus.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Avoid breathing dust, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources.
Section 7: Handling and Storage
Precautions: Keep away from heat. Keep away from sources of ignition. Do not breathe dust. Aqueous solutions or powders that become wet render surfaces extremely slippery. Use personal protective equipment.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Keep away from oxidizing materials.
Maximum Storage Temperature: 45 °C, 113 °F
Section 8: Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Exposure Limits: Not available.
Section 9: Physical and Chemical Properties
Physical state and appearance: It is white solid (Powdered Crystalline or Granular).
Taste: Not available.
Molecular Weight: NA
Melting Point: >150C
Specific Gravity: 1.24.
Boiling Point: NA
Solubility: Insoluble in water.
Section 10: Stability and Reactivity Data
Stability: It is stable under normal storage conditions.
Incompatibility with various substances: Heat oxidizing agents and bases.
Corrosivity: Non-corrosive in presence of glass.
Polymerization: Will not occur.
Hazardous decomposition products: Thermal decomposition may produce: fumes, aldehydes and carbon oxides (CO, CO2).
Conditions to Avoid: Heat, dusting and incompatibles.
Section 11: Toxicological Information
There were no target organ effects noted following ingestion or dermal exposure in animal studies. Did not cause skin allergic reactions in skin sensitization studies.
Reproductive toxicity: Data not available
Carcinogenic effects: Not reported as a carcinogen.
Skin: LD50/Dermal/Rabbit > 2000mg/kg
Ingestion: LD50/Oral/Rat > 5000 gm/kg
Teratogenic Effects: Not available.
Environmental Toxicity: Not available.
Section 12: Ecological Information
Does not bioaccumulate, inherently biodegradable.
Exotoxicity: EC50/72h/Algae > 1100 mg/L
Section 13: Disposal Considerations
Waste Disposal: Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with legal requirements.
Section 14: Transport Information
US DOT Classification:
Canada TDG Classification:
Section 15: Other Regulatory Information
CERCLA Hazardous Substances: None known.
SARA 313 Components: This product does not contain greater than 1.0% (greater than 0.1% for carcinogenic substance) of any chemical substances listed under SARA Section 313. SARA 311/312 Hazards: None.
California Prop. 65 Components: This product does not intentionally contain any chemicals known by the State of California to cause cancer and/or birth defects. Moreover, we do not routinely analyze its products for impurities which may be such chemicals.
HMIS (Perceived): Health Hazard: 1; Fire Hazard: 1; Reactivity: 0; Personal Protection: B
NFPA (Perceived): Health: 1; Flammability: 1; Reactivity: 0
Section 16 - Additional Information
Prepared by AJK on 15 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Diverting Agent Manufacturers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Oil Drilling Fracking or Fracturing Chemicals Ammonium Persulfate Acetic Acid ATMP Phosphonate, Amino tris (methylene phosphonic acid) Citric Acid Clay Stabilizer Encapsulated Gel Breaker Glycerin Boron and Zirconium based Guar Cross Linkers Diverting Agent DETA diethylenetriamine penta(methylene phosphonic acid) Friction Reducer Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Hydrogen Sulfide Scavenger Phthalic Acid Phthalic Anhydride Potassium chloride KCl substitute Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Scale Inhibitor BHMT Phosphonate or BHMTPMPA Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride Zinc Chloride
19 August, 2018