Fracturings chemicals usa Finoric Fracturing stimulation production coil tubing chemicals
Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Email: info@finoric.com

Home - Product CAS - Contact

Search our website here

X-Link 4BBG, Crosslinkers Boron Based SDS, MSDS Sheet

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas  with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.

Bg Jar Chemical Toll Packaging & Contract Packaging Palletized and Shrink Wrapped Drum Packing Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Chemical Solvent Tote USA Chemical Manufacturers Carboy Bulk Jumbo Bags

Metalized Pouch Liquid Powder Pillow Pouch Sample Bottle Pouch with Cap Varous tub jar packing Pail Packing

Specifications of Boron &Zirconium Based Cross Linker

Cross Linker (BBG4 - Borate based) SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name: Cross Linker (BG-4 - Borate based)
CAS No.: Mixture
Intended use: Fracturing and Industrial Manufacturing Use.

SUPPLIER
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA

In case of emergency contact:
InfoTrac
US: 1-800-535-5053 
International: 352-323-3500

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 1A, B, C
Reproductive toxicity Category 1A, 1B
Hazardous to the aquatic environment, acute hazard Category 3

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Health Hazzard
Health Hazard

GHS Label Elements
corrosive.png
Health Hazard

Signal Words: Danger

Hazard Statements:
H314: Causes severe skin burns and eye damage
H360: May damage fertility or the unborn child.
H402: Harmful to aquatic life

Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
C = Corrosive
R35 Causes severe burns.
R60 May impair fertility.
R61 May cause harm to the unborn child.

3. Composition/Information on Ingredients

Ingredient-1: Sodium Borate or Borax or Sodium Tetraborate Borates, Tetra, Sodium Salts
EINECS EC Number: 215-540-4
CAS No.: 1303-96-4 (Decahydrate)
Percentage: 10-30%
Ingredient-2: Sodium Hydroxide Pellets
CAS No.: 1310-73-2
EINECS EC Number: 215-185-5
Percent: 15 - 40%
Ingredient-3--: Water and Non-hazardous additives.

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: For small spills use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Use a shovel to put into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to drain.

7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits for Borax:
Sodium Tetraborate Decahydrate (1303-96-4)
USA ACGIH, ACGIH TWA (mg/m³), 2 mg/m³
USA ACGIH, ACGIH STEL (mg/m³), 6 mg/m³
Sodium borate USA (OSHA) TWA 10 mg/m3
Airborne Exposure Limits for Sodium Hydroxide:
USA ACGIH
: 2 mg/m³ ACGIH Ceiling (mg/m³)
USA OSHA
: 2 mg/m³ OSHA PEL (TWA) (mg/m³)
British Columbia: 2 mg/m³ OEL Ceiling (mg/m³)
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a full face piece particulate respirator (NIOSH type N100 filters) may be worn for up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids. glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Yellow/Brown Liquid
Flash Point: 160° C
Solubility in Water: Completely miscible
pH: 11-12
Specific Gravity: Approximately 1.3
Vapor Pressure: Not Available
Vapor Density: Not Available

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic gases and vapors may be released if involved in a fire.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, alkaloids, and metallic salts.
Conditions to Avoid: Incompatibles.

11. Toxicological Information

Borax: Oral rat LD50: 2660 mg/kg. Investigated as a mutagen, reproductive effector. Anhydrous: Investigated as a reproductive effector.
Sodium Hydroxide:
1350 mg/kg skin-rabbit LD50;
104-340 mg/kg oral-rat LD50;
40 mg/kg intra peritoneal-mouse
LD50; 500 mg/kg oral-rabbit LDLo
Tests on laboratory animals indicate material may produce adverse mutagenic effects.
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

12. Ecological Information

Toxicity to fish for Borax: LC50 - Limanda: 74 mg/l - 96 h, EC50 Daphnia: 1085 mg/l
Toxicity to fish for Sodium Hydroxide:
LC50 - Gambusia affinis (Mosquito fish) - 125 mg/l - 96 h
LC50 - Oncorhynchus mykiss (rainbow trout) - 45,4 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: Immobilization EC50 - Daphnia - 40,38 mg/l - 48 h
Environmental Fate:
When released into the soil, this material may leach into groundwater.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Borax in accordance with federal, state and local requirements.

14. Transport Information

US DOT & ADR/RID:
U.S. DOT 49 CFR 172.101
BULK / NON BULK
Shipping Name: Sodium Hydroxide solution
Hazard Class/Division 8
Identification No. UN1824
Packing Group PG II

15. Regulatory Information

USA:
TSCA INVENTORY: All components are listed in the inventory
SARA 302/304 STATUS: This product does not contain any components listed as Extremely Hazardous substances.
SARA 311/312 CLASSIFICATION: Sodium Hydroxide
HMIS (Perceived): Health Hazard: 3, Fire Hazard: 1, Reactivity: 1.
NFPA (Perceived): Health: 3, Flammability: 1, Reactivity: 1

16. Other Information

European/International Regulations European Labeling in Accordance with EC Directives:
H314 = Causes severe skin burns and eye damage.
H360 = May damage fertility or the unborn child.
H402 = Harmful to aquatic life.

C = Corrosive.
R35 = Causes severe burns.
R60 = May impair fertility.
R61= May cause harm to the unborn child.

Prepared by AJK on 15 August 2016

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Boron or Borate based and Zirconium based Cross Linker Manufacturers:

Finoric LLC
Houston, Midland & Pleasanton, Texas, USA.

Tel: 1-855-346-6742 (1-855-FINORIC)
Email:
info@finoric.com

Most products offered from our Houston & Midland Texas area warehouse

We solicit inquiries for processing (blending, making solutions, sieving) & re-bagging needs at our Houston & Midland facility on toll manufacturing basis.
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio, Chicago and Los Angeles Area, USA.

Oil Drilling Fracking or Fracturing Chemicals
Ammonium Persulfate Acetic Acid
ATMP Phosphonate, Amino tris (methylene phosphonic acid)  
Citric Acid Clay Stabilizer
Encapsulated Gel Breaker Glycerin
Boron and Zirconium based Guar Cross Linkers Diverting Agent
DETA diethylenetriamine penta(methylene phosphonic acid) Friction Reducer
Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate
Hydrogen Sulfide Scavenger Phthalic Acid
Phthalic Anhydride Potassium chloride KCl substitute
Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide
Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Scale Inhibitor BHMT Phosphonate or BHMTPMPA
Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous
Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution
Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride
Zinc Chloride  

Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Palletized and Shrink Wrapped Drum Packing Guar Cross Linker Manufacturers

12 April, 2017