Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here
Clay Stabilizer SDS MSDS Sheet
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Clay Stabilizer Manufacturers Specifications
Clay Stabilizer SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Clay Stabilizer, Clay Sté 75
CAS No.: Mixture
Molecular Weight: It is a mixture
Chemical Formula: NA
Intended Use: Oil well fracturing and Industrial use.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral Category 5
Skin irritation Category 2
Eye irritation Category 2A
Specific target organ toxicity – single exposure, Respiratory system Category 3
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H303: May be harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P 270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P501: Dispose of contents/container to authorized agents.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:OSHA Hazards: None
R Phrases: R36 Irritating to eyes. R22 Harmful if swallowed.
S Phrases: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
HMIS (Perceived): Health hazard: 1, Flammability: 1, Physical hazards: 0
NFPA (Perceived): Health hazard: 1, Fire: 1, Reactivity Hazard: 0
3. Composition/Information on Ingredients
None of the components of this product are hazardous.
Ingredient: : Blend of Choline Chloride and Monovalent, Divalent and TriValent Salts.
Composition/specific chemical identities are withheld as a trade secret under the provisions of OSHA hazard communication standard 29 CFR 1910.1200
4. First Aid MeasuresAlways seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Auto-Ignition Temperature: NA.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: Not available.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: CO2, foam, dry chemicals. NOT RECOMMENDED: Do not use direct water jet on burning material.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool.
6. Accidental Release Measures
Small Spill: Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible, inorganic absorbent material, or sweep up, and remove to an approved disposal container. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Do not breathe mist. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat or smoke while handling. Respect good personal hygiene.
Avoid contact with skin and eyes. Avoid formation of mist and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Keep away from ignition sources and naked flame.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Clay Stabilizer is colorless to yellow.
Solubility: It is soluble in water.
pH: 5.0 - 9 at 10% solution at 25C (77F)
Density: 1.05 to 1.1 g/cm3
% Volatiles by volume @ 21C (70F): 0
Boiling Point: > 212F
Melting Point: <50F.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. Avoid contact with strong acids, alkali or oxidizing agents..
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and hydrogen chloride at elevated temperatures.
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, alkali or oxidizing agents..
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation. Ingestion.
Toxicity to Animals: LD50: Not available. LC50: Not available.
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Acute Potential Health Effects:
12. Ecological Information
Environmental Fate: Based on available information the product will not bio accumulate.
Environmental Toxicity: The material is not considered as environmental hazard.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT: Not regulated as dangerous goods.
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
15. Regulatory Information
OSHA Hazards: None
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold reporting levels.
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
16. Other Information
European/International Regulations European Labeling in Accordance with EC Directives:
H303 = May be harmful if swallowed.
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
Xi = Irritant
R22 Harmful if swallowed.
R36 = Irritating to eyes.
Prepared by AJK on 15 August 2016 - Printed on: 23 August 2016
Our company provides this Clay Stabilizer MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
Clay Stabilizer Manufacturers:
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland, TX area warehouse
We solicit inquiries for processing (blending, making solutions, sieving) & re-bagging needs at our Houston & Midland facility on toll manufacturing basis.
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio, Chicago and Los Angeles Area, USA.
Oil Drilling Fracking or Fracturing Chemicals Ammonium Persulfate Acetic Acid ATMP Phosphonate, Amino tris (methylene phosphonic acid) Citric Acid Clay Stabilizer Encapsulated Gel Breaker Glycerin Boron and Zirconium based Guar Cross Linkers Diverting Agent Friction Reducer Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Hydrogen Sulfide Scavenger Phthalic Acid Phthalic Anhydride Potassium chloride KCl substitute Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Scale Inhibitor BHMT Phosphonate or BHMTPMPA Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride Zinc Chloride
Clay Stabilizer Suppliers Manufacturers, Exporters, Importer
12 April, 2017