Fracturings chemicals usa Finoric Fracturing stimulation production coil tubing chemicals
Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Email: info@finoric.com

Home - Product CAS - Contact

Search our website here

SDS MSDS Sheet of Cement Defoamer, Defoamer for Dry on the Fly Guar, Supplier Manufacturers

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas  with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.

Bg Jar Chemical Toll Packaging & Contract Packaging Palletized and Shrink Wrapped Drum Packing Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Chemical Solvent Tote USA Chemical Manufacturers Carboy Bulk Jumbo Bags

Metalized Pouch Liquid Powder Pillow Pouch Sample Bottle Pouch with Cap Varous tub jar packing Pail Packing

Specifications of Cement Defoamer

C-503L Cement Defoamer SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Cement Defoamer
CAS No.: Mixture
Recommended usage: Industrial Manufacturing.

SUPPLIER
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA

In case of emergency contact:
InfoTrac
US: 1-800-535-5053 
International: 352-323-3500

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral (Category 4), H302
Skin irritation (Category 2), H315
Serious eye damage/eye irritation (Category 2B) H320
Specific target organ toxicity, repeated exposure (Category 1) H372

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
irritant.png
Irritant

GHS Label Elements
healthhazard.png
Health Hazard

Signal Words: Danger

Hazard statements:
H302- Harmful if swallowed.
H315 - Causes skin irritation.
H320 - Causes eye irritation.
H372 - Causes damage to organs through prolonged or repeated exposure.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant, Xn Harmful
R36/38 - Irritating to eyes and skin.
R35 - Causes severe burns.
S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

3. Composition/Information on Ingredients

Chemical Name

Amount

CAS Number

POLYETHER POLYOL

Confidential

25322-69-4

HYDROPHOBIC SILICA

Confidential

67762-90-7

ALKENES, C15-18

Confidential

93762-80-2

4. First Aid Measures

Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Get immediate medical attention. If vomiting should occur spontaneously, keep airway clear.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Remove any contact lenses and continue flushing. Get medical attention immediately.

5. Fire Fighting Measures

Fire: Can burn in fire, releasing toxic  vapors. As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Combustion Products: Toxic gases may be  produced.

6. Accidental Release Measures

Safeguards (Personnel): Protect skin and eyes from  exposure.
Initial Containment: Contain spilled material. Absorb spills with inert material. Treat or dispose of waste material in accordance with all local, state/provincial,  and  national requirements.
Small Spill: Secure the spill area. Absorb spills with inert material. Treat or dispose of waste material in accordance with all local, state/provincial,  and  national requirements.
Large Spill:
Contain spilled material. Absorb spill with inert material (e g, dry sand or earth), then place in a chemical waste container. Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.

7. Handling and Storage

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources.
Handling (Personnel ): Avoid contact with skin and  eyes. Keep out of reach of  children.
Storage Precautions: Store away from oxidizers or materials bearing a yellow 'DOT'   label.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Hydrophobic Silica has the following limits:
OSHA PEL: 10 mg/m^3 ACGIH TWA:  10 mg/m^3
Maintain this limit for the mixture.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Form: Liquid
Color: Opaque
Odor: Hydrocarbon
Vapor Pressure: ND
Vapor Density: ND (Air = 1)
Solubility in water: Insoluble
Specific Gravity: 0.90 (Water = 1)
Bulk Density: 7.51 pounds per gallon
pH: 5.5 - 7.9
% Volatiles: ND

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide and fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers.
Conditions to Avoid: Avoid contact with acids and  oxidizers..

11. Toxicological Information

No  information available

12. Ecological Information

No  information available

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Material in accordance with legal requirements.

14. Transport Information

DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID: Not dangerous goods

15. Regulatory Information

USA:
This product contains hazardous materials as defined by the OSHA Hazard Communication Standard 29 CFR 1910.1200.  As defined under Sara 311 and 312, this product contains materials that are acute hazards.
This material or all of its components are listed on the Inventory of Existing Chemical Substances under the Toxic Substance Control Act (TSCA).

16. Other Information

European/International Regulations European Labeling in Accordance with EC Directives
H302- Harmful if swallowed.
H315 - Causes skin irritation.
H320 - Causes eye irritation.
H372 - Causes damage to organs through prolonged or repeated exposure.
Xi Irritant, Xn Harmful
R36/38 - Irritating to eyes and skin.
R35 - Causes severe burns.

Prepared by AJK on 12 September 2016

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Finoric LLC
Houston, Midland & Pleasanton, Texas, USA.

Tel: 1-855-346-6742 (1-855-FINORIC)
Email:
info@finoric.com

Most products offered from our Houston & Midland Texas area warehouse

We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs at our Houston facility on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York and Los Angeles Area.

Oil Drilling Fracking or Fracturing Chemicals
Ammonium Persulfate Acetic Acid
ATMP Phosphonate, Amino tris (methylene phosphonic acid)  
Citric Acid Clay Stabilizer
Encapsulated Gel Breaker Glycerin
Boron and Zirconium based Guar Cross Linkers Diverting Agent
Friction Reducer  
Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate
Hydrogen Sulfide Scavenger Phthalic Acid
Phthalic Anhydride Potassium chloride KCl substitute
Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide
Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Scale Inhibitor BHMT Phosphonate or BHMTPMPA
Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous
Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution
Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride
Zinc Chloride  

Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Palletized and Shrink Wrapped Drum PackingCement Defoamer Manufacturers

12 April, 2017