Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Potassium Chloride SDS MSDS Sheet KCl, Suppliers and Manufacturers' Represantative
Synonyms: Potassium Monochloride, Cloruro de Potasio, Cloruro Potasio
The corresponding Mineral is Muriate of Potash or MOP
CAS No.: 7447-40-7; Molecular Weight: 74.5; Chemical Formula: KCl
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Potassium Chloride MSDS
Potassium Chloride Specifications
Potassium Chloride USP BP ACS FCC Food Grade Manufacturers
SDS MSDS Sheet of Potassium Chloride Material Safety Data Sheet
1. Product Identification
Synonyms: Potassium monochloridehloride, MOP, Muriate of Potash, Potassium Chloride
CAS No.: 7447-40-7
EINECS EC Number: 231-211-8
Molecular Weight: 74.55
Chemical Formula: KCl
Recommended usage: Oil well mining and Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC) or not covered by GHS:
May causes mild skin irritation.
May cause mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Potassium Chloride
CAS No.: 7447-40-7
EINECS EC Number: 231-211-8
4. First Aid Measures
Inhalation:If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard.
Explosion: It is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Potassium Chloride.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.
7. Handling and Storage
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Potassium Chloride is white crystals or powder.
Odor: It is odorless.
Solubility: Potassium Chloride is soluble 28.1 g/100g of water @ 0C.
Density: It has specific gravity of 1.987
pH: ca. 7 Saturated aq. sl. @ 15C
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 1500C (2732F) Sublimes.
Melting Point: 772C (1422F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Potassium Chloride is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization: Will not occur.
Incompatibilities: Bromine trifluoride; potassium permanganate plus sulfuric acid.
Conditions to Avoid: No information found.
11. Toxicological Information
Oral rat LD50: 2600 mg/kg; irritation eye rabbit (standard Draize): 500 mg/24 hr mild; investigated as a mutagen.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
12. Ecological Information
Toxicity to fish:
LC50 - Pimephales promelas (fathead minnow) - 880 mg/l - 96 h
Mortality NOEC - Pimephales promelas (fathead minnow) - 500 mg/l - 7 d
Mortality LOEC - Pimephales promelas (fathead minnow) - 1.000 mg/l - 7 d
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - > 440 mg/l - 48 h
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Potassium Chloride container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
15. Regulatory Information
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No, Reactivity: No (Pure / Solid)
HMIS (Perceived): Health Hazard: 1, Fire Hazard: 0, Reactivity: 0, Personal Protection: E
NFPA (Perceived): Health: 1,Flammability: 0, Reactivity: 0
Protective Equipment: Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Safety glasses.
Canada WHMIS: Not controlled under WHMIS (Canada).
EINECS EC Number: 231-211-8
16. Other Information
Prepared by AJK on 15 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Potassium Chloride Manufacturers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Oil Drilling Fracking or Fracturing Chemicals Ammonium Persulfate Acetic Acid ATMP Phosphonate, Amino tris (methylene phosphonic acid) Citric Acid Clay Stabilizer Encapsulated Gel Breaker Glycerin Boron and Zirconium based Guar Cross Linkers Diverting Agent Friction Reducer Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Hydrogen Sulfide Scavenger Phthalic Acid Phthalic Anhydride Potassium chloride KCl substitute Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Scale Inhibitor BHMT Phosphonate or BHMTPMPA Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride Zinc Chloride
Potassium Chloride Suppliers, Importers, Exporters, Manufacturers
19 August, 2018