Fracturings chemicals usa Finoric Fracturing stimulation production coil tubing chemicals
Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Email: info@finoric.com

Home - Product CAS - Contact

Search our website here

Pentaerythritol Manufacturers SDS MSDS Sheet

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.

Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.

Bg Jar Chemical Toll Packaging & Contract Packaging Palletized and Shrink Wrapped Drum Packing Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Chemical Solvent Tote USA Chemical Manufacturers Carboy Bulk Jumbo Bags

Metalized Pouch Liquid Powder Pillow Pouch Sample Bottle Pouch with Cap Varous tub jar packing Pail Packing

Specifications from Pentaerythritol Manufacturers

Pentaerythritol
Technical & Pure ACS AR Crystals
Pentaerythritol

Pentaerythritol SDS Safety Data Sheet
MSDS Sheet Material Safety Data Sheet

1. Product Identification

Synonyms: Tetrakis(hydroxymethyl)methane; 2,2-Bis-(hydroxymethyl)-1,3-propanediol.
CAS No.: 115-77-5
EINECS EC Number: 204-104-9
Molecular Weight: 136.15
Chemical Formula: C5H12O4
Recommended usage: Industrial Manufacturing.

SUPPLIER
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA

In case of emergency contact:
InfoTrac
US: 1-800-535-5053 
International: 352-323-3500

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2B
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H315: Causes skin irritation.
H320: Causes eye irritation.
H335: May cause respiratory irritation.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant R36/37/38

HMIS (Perceived)
Health hazard: 1
Flammability: 1
Physical hazards: 0
NFPA (Perceived)
Health hazard: 1
Fire: 1
Reactivity Hazard: 0

3. Composition/Information on Ingredients

Ingredient: Pentaerythritol.
CAS No.: 115-77-5
Percent: 97 - 100%

4. First Aid Measures

Always take medical assistance after the first aid.

Inhalation: Remove to fresh air. If breathing is difficult, give oxygen. Get Medical advice.
Ingestion: Give several glasses of water to drink to dilute the effect and get medical advice.
Skin Contact: Remove any contaminated clothing and shoes. Wash soap or mild detergent and water for at least 15 minutes. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention.

5. Fire Fighting Measures

Fire: Pentaerythritol not considered to be a fire hazard. It may be combustible at high temperature.
Explosion: Pentaerythritol is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Ventilate area of leak or spill of Pentaerythritol. Wear appropriate personal protective equipment. Pick up spills and place in a suitable container for reclamation or disposal. Follow all legal methods of reporting.

7. Handling and Storage

Keep Pentaerythritol in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Pentaerythritol may be hazardous when empty since they retain product residues (dust, solids).

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: OSHA Vacated PELs: Pentaerythritol, 98%: 10 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction)
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Pentaerythritol is white Powder or Crystals.
Odor: Odorless.
Solubility: Soluble in water.
Density: 1.4.
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 276C. Decomposes.
Melting Point: 254-259C.

10. Stability and Reactivity

Stability: Pentaerythritol is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Burning may produce carbon monoxide, carbon dioxide, fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, strong acids, chlorides, thiophosphoryl chloride, anhydride and alkalis, metals.
Conditions to Avoid: Incompatibles.

11. Toxicological Information

LD50 oral Rabbit: 18500 mg/kg
LD50 Oral - rat - 18,500 mg/kg
LD50 Oral - mouse - 18,500 mg/kg
Pentaerythritol is not reported as Carcinogen or Mutagen or Teratogen.

12. Ecological Information

Environmental Toxicity:
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 33,600 mg/l - 48h
Environmental Fate
Not available.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Pentaerythritol in accordance with legal requirements.

14. Transport Information

DOT (USA)
Not listed
IMDG
Not listed
IATA
Not listed

15. Regulatory Information

USA:
OSHA Hazards
: Not listed.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: None.
TSCA: Listed.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: Not listed.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Massachusetts Right To Know Components: Pentaerythritol, CAS-No.: 115-77-5
Pennsylvania Right To Know Components: Pentaerythritol, CAS-No.: 115-77-5
New Jersey Right To Know Components: Pentaerythritol, CAS-No.: 115-77-5

Canada - DSL/NDSL: The product is on the Canadian DSL list.
Canadian WHMIS Classifications: CLASS D-2A

Australian Hazchem Code: -
Poison Schedule: -

16. Other Information

EINECS EC Number: 204-104-9
European Labeling in Accordance with EC Directives
H315: Causes skin irritation.
H320: Causes eye irritation.
H335: May cause respiratory irritation.

Xi = Irritant
R36/37/38 Irritating to eyes, respiratory system and skin.
Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 37/39 Wear suitable gloves and eye/face protection.

Prepared by AJK on 20 August 2016 - Printed on: 24 August 2016

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Pentaerythritol Manufacturers:

Finoric LLC
Houston, Midland & Pleasanton, Texas, USA.

Tel: 1-855-346-6742 (1-855-FINORIC)
Email:
info@finoric.com

Most products offered from our Houston & Midland, TX area warehouse

We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.

Organic Products
BHA Butylated Hydroxyanisole BHT Butylated Hydroxy toluene
Citric Acid Choline Chloride
Disodium EDTA Erythorbic Acid
Furfuryl Alcohol Hydrolyzed Polymaleic Anhydride HPMA
Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate  
Isatoic Anhydride Glycine
Methyl & Dimethyl Anthranilate Maleic Acid
Pentaerythritol Phosphonono butanetri carboxylic acid PBTC
Pentaerythritol Picric Acid
Polyquaternium WSCP Poly carboxylate Concrete strengthner
Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Potassium Phthalimide
Salicylic Acid Sodium Hydroxy methane sulfonate or Sodium Formaldehyde Bisulfite
Sulfamic Acid TBHQ Tertiary Butyl Hydro Quinone.htm
Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS  

Pentaerythritol Manufacturers

Pentaerythritol Suppliers, Manufacturers, Exporters, Importers

12 April, 2017