Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Search our website here:
Magnesium Chloride Anhydrous SDS MSDS Sheet, Suppliers and Manufacturers' Represantative
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by company owned & operated full-fledged chemical manufacturing facilities in Midland & Houston, Texas with associated manufacturing sites in India, Dubai and China we are a truly multi-national chemical manufacturer and distributor.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Magnesium Chloride Anhydrous Manufacturers Specifications
Magnesium Chloride Hexahydrate Manufacturers Specifications
Magnesium Chloride BP USP FCC ACS Food Grade Manufacturers
For MSDS Sheet Click Magnesium Chloride Anhydrous MSDS
Magnesium Chloride Anhydrous SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Dus-Top Magnesium Dichloride, Magnogene.
CAS No.: 7786-30-3
EINECS: EC Number: 232-094-6
Molecular Weight: 95.21
Chemical Formula: MgCl2
Recommended usage: Industrial Manufacturing.
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Target Organs: Eyes, respiratory system.
Generally described as non-hazardous as per GHS, however, we will prefer to add the following warning.
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: Warning
H315 : Causes skin irritation.
H319 - Causes serious eye irritation.
H335: May cause respiratory irritation.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash thoroughly after handling.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P402: Store in a dry place.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Symbol: Xi irritant
Risk Phrases: R36/38- Irritating to eyes and skin.
For the full text of the S-statements R-phrases mentioned in this Section, see Section 16.
Health hazard: 1
Physical hazards: 1
Health hazard: 1
Reactivity Hazard: 0
3. Composition/Information on Ingredients
Ingredient: Magnesium Chloride anhydrous
CAS No.: 7786-30-3
EINECS: EC Number: 232-094-6
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Hydrochloric acid and Magnesium Oxide may be formed.
Fire: Magnesium Chloride Anhydrous is not flammable.
Explosion: Not likely.
Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Magnesium Chloride Anhydrous in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with water and strong oxidizing agents.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Magnesium Chloride Anhydrous is white powder or granules.
Solubility: Highly soluble in water.
pH: Not applicable
Density: 2.3 gm/cc at 25C
Molecular formula: MgCl2
Molecular weight: 95.21
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not Available.
Melting Point: Not Available.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Magnesium Chloride Anhydrous very delinquent in nature. It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Hydrochloric acid and Magnesium oxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Moisture and Strong Oxidizing agents.
Conditions to Avoid: Incompatibles. Avoid dusting.
11. Toxicological Information
Toxicity to Animals:
Oral, mouse: LD50 = 4700 mg/kg;
Oral, rat: LD50 = 2800 mg/kg;
Carcinogenic Effects: No.
Mutagenic Effects: No.
Teratogenic Effects: No.
Developmental Toxicity: No.
12. Ecological Information
BOD5 and COD: Not available.
Environmental Fate: Not expected to be a short term hazard.
Environmental Toxicity: No reports.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT (USA): Not Regulated.
IMDG: Not Regulated.
IATA: Not Regulated.
ADR/RID: Not Regulated.
15. Regulatory Information
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
Massachusetts Right To Know Components: No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components: Magnesium chloride, CAS-No. 7786-30-3
New Jersey Right To Know Components: Magnesium chloride CAS-No. 7786-30-3
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
TSCA: CAS# 7786-30-3 is listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
Canada - DSL/NDSL: CAS# 7786-30-3 is listed on Canada's DSL List.
Canada - WHMIS: This product has a WHMIS classification of D2B.
16. Other Information
EINECS EC Number: 232-094-6
European Labeling in Accordance with EC Directives:
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
Xi = irritant
R36/38 = Irritating to eyes and skin.
Section 16 - Additional Information
Prepared by AJK on 15 August 2016
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Magnesium Chloride Anhydrous Manufacturers:
Houston, Midland & Pleasanton, Texas, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland, TX area warehouse
We solicit inquiries for warehousing, processing (blending, making solutions, sieving) & re-bagging needs on toll manufacturing basis.
We are looking for Technical Sales Representatives in New York, Chicago and Los Angeles Area.
Inorganic Chemicals Aluminum Chloride Hexahydrate Anhydrous Ammonium Chloride Ammonium Persulfate Barium Chloride Calcium Butyrate Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate. Calcium Formate Calcium D Saccharate Glucarate Calcium Hydroxide Calcium Nitrate, Calcium Nitrite Calcium Oxide Mono Di Tri Calcium Phosphate Calcium Propionate Calcium Sulfate Chromic Chloride Cupric or Copper Chloride Magnesium Chloride Anhydrous Magnesium Chloride Hexahydrate Magnesium Citrate Magnesium Sulfate Manganese Chloride Manganese Sulfate Phosphorous Acid Potassium Chloride Mono Di Tri Potassium Phosphate Potassium Nitrate Potassium Permanganate Potassium Persulfate Potassium Peroxy monopersulfate Sodium Acetate Anhydrous Sodium Acetate Trihydrate Sodium Butyrate Sodium Citrate Sodium Diacetate Sodium Formate Sodium Metabisulfite Sodium Nitrate, Sodium Nitrite Sodium Persulfate Sodium Propionate Sodium Thiosulfate Anhydrous Sodium Thiosulfate Pentahydrate Vanadium Chloride Zinc Acetate Zinc Ammonium Chloride, Galvanizing Flux Zinc Carbonate Zinc Chelate Zinc Chloride Zinc Sulfate Zirconyl Chloride Chemical Toll Manufacturers
Magnesium Chloride Anhydrous Suppliers, Importers, Exporters, Manufacturers
27 June, 2018