Call Toll-Free: 1-855-FINORIC
Houston & Midland, Texas and Chicago, Illinois, USA
Hydrolyzed Polymaleic Anhydride, HPMA Manufacturers, MSDS Sheet
FInOrIC, etymologically derived from our business line of Fine Inorganics, Organics and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
Hydrolyzed Polymaleic Anhydride Manufacturers; HPMA Manufacturers
Hydrolyzed Polymaleic Anhydride
Material Safety Data Sheet Hydrolyzed Polymaleic Anhydride HPMA SDS MSDS Sheet
1. Product Identification
Chemical Name: Hydrolyzed Polymaleic Anhydride
General Name: HPMA
CAS No.: 26099-09-02
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
GHS Label Elements
Signal Words: Caution
H302: Harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352-IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Potential Acute Health Effects: Hydrolyzed Polymaleic Anhydride or HPMA is hazardous in case of skin contact (irritant, sensitizer), of eye contact (irritant), of ingestion, of inhalation (lung irritant, lung sensitizer). Over-exposure by inhalation may cause respiratory irritation. Ingestion may cause gastritis possibly progressing to necrosis or hemorrhage.
Potential Chronic Health Effects:
Carcinogenic Effects: Not known Carcinogen.
Mutagenic Effects: Not available
Teratogenic Effects: Not available
Developmental Toxicity: Not available
3. Composition/Information on Ingredients
Active Ingredients: HPMA
CAS No.: 26099-09-02
Percentage: ≥ 48%
4. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If Hydrolyzed Polymaleic Anhydride or HPMA is swallowed induce vomiting. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used. Wash clothing & shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Flammability : None
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire Water can be used.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Sealed containers may rupture when heated.
Hazardous Decomposition Products: Carbon Monoxide , Carbon Dioxide and unspecified complex compounds.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Hydrolyzed Polymaleic Anhydride or HPMA spills must be handled with due care. Stop leak if without risk. Keep Hydrolyzed Polymaleic Anhydride or HPMA damp using water spray. Do not touch spilled material. Prevent entry into sewers. Eliminate all ignition sources. Do not touch or walk through spilled material.
7. Handling and Storage
Keep Hydrolyzed Polymaleic Anhydride or HPMA in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Separate from combustibles, organic or other readily oxidizable materials. Avoid storage on wood floors. Avoid contact with eyes, skin clothing etc. Do not swallow. Containers of Hydrolyzed Polymaleic Anhydride or HPMA may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred.
Respiratory System Protection: Avoid to inhalation the vapor or gas.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other protection: After work take bath and change the clothes.
9. Physical and Chemical Properties
Appearance: Hydrolyzed Polymaleic Anhydride or HPMA is clear amber liquid.
Boiling point: N/TA
Solid content: 48-52%
PH Value(1%water solution): 2.0-3.0
Water solubility: Miscible with water with any proportion
Flash point: N/A
10. Stability and Reactivity
Stability: Hydrolyzed Polymaleic Anhydride or HPMA is stable.
Hazardous Polymerization: No.
Condition to Avoid: High temperature and frequent exposure.
Materials to Avoid: Strong acid , Strong alkaline , Strong oxidizers and Cation surface-active agent.
Decomposition Products: Water, Carbon Monoxide ,Carbon Dioxide etc.
11. Toxicological Information
Without acute toxicity.
ORAL-RAT LD50 5000 mg/ kg
12. Ecological Information
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Hydrolyzed Polymaleic Anhydride or HPMA in accordance with federal, state and local requirements.
14. Transport Information
15. Regulatory Information
16. Other Information
Our company provides this Hydrolyzed Polymaleic Anhydride or HPMA MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Hydrolyzed Polymaleic Anhydride or HPMA MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Hydrolyzed Polymaleic Anhydride manufacturers; HPMA manufacturers
Houston & Midland, Texas, and Chicago, Illinois, USA.
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston & Midland, TX area warehouse
We solicit inquiries for processing (blending, making solutions, sieving) & re-bagging needs at our Houston & Midland facility on toll manufacturing basis.
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Organic Products BHA Butylated Hydroxyanisole BHT Butylated Hydroxy toluene Citric Acid Choline Chloride Disodium EDTA Erythorbic Acid Furfuryl Alcohol Hydrolyzed Polymaleic Anhydride HPMA Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate Isatoic Anhydride Glycine Methyl & Dimethyl Anthranilate Maleic Acid Pentaerythritol Phosphonono butanetri carboxylic acid PBTC Pentaerythritol Picric Acid Polyquaternium WSCP Poly carboxylate Concrete strengthner Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Potassium Phthalimide Salicylic Acid Sodium Hydroxy methane sulfonate or Sodium Formaldehyde Bisulfite Sulfamic Acid TBHQ Tertiary Butyl Hydro Quinone.htm Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Hydrolyzed Polymaleic Anhydride Suppliers, Manufacturers, Exporters, Importers
31 May, 2015