Fracturings chemicals usa Finoric Fracturing stimulation production coil tubing chemicals
Call Toll-Free: 1-855-FINORIC
Houston, Midland & Pleasanton, Texas, USA.
Email: info@finoric.com

Home - Product CAS - Contact

Search our website here

B-2000 based on ATMP Phosphonate, Amino tris (methylene phosphonic acid) SDS MSDS Sheet

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas  with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.

Bg Jar Chemical Toll Packaging & Contract Packaging Palletized and Shrink Wrapped Drum Packing Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Chemical Solvent Tote USA Chemical Manufacturers Carboy Bulk Jumbo Bags

Metalized Pouch Liquid Powder Pillow Pouch Sample Bottle Pouch with Cap Varous tub jar packing Pail Packing

For Specifications Sheet Specifications of ATMP Phosphonate Amino tris (methylene phosphonic acid) Manufacturers

ATMP
Fracking or Fracturing Amino tris (methylene phosphonic acid)
ATMP Amino tris (methylene phosphonic acid)

B-2000 SDS MSDS Sheet (ATMP-Based)
MSDS Sheet, Material Safety Data Sheet

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Mixture of ATMP Phosphonate and other ingredients
Relevant Uses: Oil & Gas Wells and Industrial Use.

EMERGENCY TELEPHONE COMPANY

Finoric LLC
8115 Loop 540, Beasley, TX 77417
1-855-346-6742 (1-855-FINORIC)

Emergency telephone
US: 1-800-535-5053
International: 352-323-3500
Contract Number 104662

2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Metal Corrosion, Category 1
Eye Irritation, Category 2

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
GHSirritant
Irritant

Signal Word: Warning

Hazard Statements:
H290: May cause corrosion to metals
H319: Causes eye Irritation

Precautionary Statements:
P234 Keep only in original container.
P264 Wash … thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P315: Get immediate medical advice/attention.
P336: Thaw frosted parts with lukewarm water. Do not rub affected areas.
P337+P313 If eye irritation persists: get medical advice/attention.
P406 Store in corrosive resistant/... container with a resistant inner liner.
P390 Absorb spillage to prevent material damage.
P403: Store in a well ventilated place.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant.
R36/38 - Irritating to eyes and skin.
S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Carcinogenicity: This product (or any component in a concentration of 0.1% or greater) is not listed by NTP, IARC, OSHA OR THE DEPARTMENT OF THE ENVIRONMENT as a carcinogen.

3. COMPOSITION / INFORMATION ON INGREDIENTS

The composition of this mixture may be proprietary information. In the event of a medical emergency, compositional information will be provided to a physician or a nurse.
This product is hazardous as defined in 29 CFR 1910.1200. Based on the following composition:

Chemical Name---------- Wt. % -- CAS #
Amino tris (methylene-
phosphonic acid) ------ 48-52 -- 6419-19-8
Phosphonic acid ------- <4    -- 13598-36-2
Phosphoric Acid ------- <1.5% -- 7664-38-2

 
OSHA PEL
ACGIH TLV
NIOSH
Item Name
TWA
STEL
TWA
STEL
IDLH
Phosphoric Acid
1 mg/m3
3 mg/m3
1 mg/m3
3 mg/m3
1000 mg/m3

COMMENTS:
Recommended levels permissible exposure according to the Administration of Occupational Safety & Health Administration (OSHA) listed above may reflect the level or levels in 1989 and revised in subsequent regulatory activity. Although the 1989 levels have since been vacated by the 11th Circuit Court Petitions, we recommend that exposure levels below are observed as reasonable worker protection.

4. FIRST AID MEASURES

Always seek medical attention after first aid measures are provided.

Eyes: Flush with water for at least 15 minutes. Provide medical assistance.
Skin: Remove contaminated clothes and rinse skin with plenty of water or shower.
Ingestion: Do NOT induce vomiting. If the person is conscious, give milk or water to dilute stomach contents. Repose. Medical attention. Do not attempt to give anything by mouth to an unconscious person.
If spontaneous vomiting occurs, keep head below hips to prevent aspiration and monitor respiration if there is difficulty.
Inhalation: If adverse exposure to vapors and / or aerosols, immediately remove the affected person from exposure and get immediate medical assistance victim. If breathing is difficult, give oxygen. If stops breathing, give artificial respiration

5. FIRE FIGHTING MEASURES

Flash Point: Inflammable - Aqueous Solution
Flammable Limits: Not applicable
Temp. Auto Ignition: Not applicable
Fire Fighting: Material will not burn. Containers can build up pressure if exposed to heat (fire). Use water spray to cool fire exposed surfaces and to protect personnel.
Fire Fighting Equipment: As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

6. ACCIDENTAL RELEASE MEASURES OR LOSSES

Water Spill: Prevent additional discharge of material, if possible without danger. Warn occupants and downstream and danger areas downwind of corrosive release and ask everyone to stay away. Since this material sinks and is soluble, probably not recoverable. Notify authorities.
Land Spill: Prevent additional discharge of material, if possible without danger. Warn occupants and areas downwind of the dangers of releasing corrosive and ask everyone to stay away. For small spills implement cleanup procedures. For large spills, proceed with cleaning procedures and, if in public area, advise the authorities.
Contain spilled liquid with sand or earth. Recover by pumping or with suitable absorbent. Recycle or eliminate regulations of recovered materials in accordance with federal, state and local laws.

7. HANDLING AND STORAGE

Handling: Keep container closed. Open and handle container with care. Store in cool, well ventilated place away from incompatible materials.
DO NOT pressurize, cut, heat, or weld containers. Empty containers may contain product residue.
DO NOT reuse empty containers without commercial cleaning or reconditioning.
Storage: Corrosive to most metals including carbon steel, aluminum alloys and copper and copper alloys.
Temperature of Storage: Environmental
Storage Pressure: Atmospheric

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Controls: Ventilation should be provided to control exposure of workers and prevent health risks, and if necessary to reduce, prevent and control the generation of aerosols.
PERSONAL PROTECTIVE EQUIPMENT
Eyes & Face: Chemical goggles and face shield is required.
Skin: In case of contact could occur, use protective gloves and long sleeves.
Respiratory: Should exposure by inhalation may occur and engineering, work practices or other means of exposure reduction are not adequate, respirators will be needed.
Other Precautions: Safety shower and eyewash station are necessary in the area of use.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Odor: Odorless
Appearance: Clear
Color: Pale yellow
pH: <2
Percent Volatile: 50 @ 77 ° F
Boiling Point: 226 ° F 108 ° C
Freezing Point: <10 ° F 12 ° C
Solubility in Water: Soluble
Evaporation Rate: <1 (n-butyl acetate = 1)
Density: 11.07 to 11.09 lbs / gal
Specific Gravity: 1.329 - 1331--77 ° F

10. STABILITY AND REACTIVITY

Stable: Yes
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Contact with common metals produces flammable hydrogen gas.
Hazardous Decomposition Products: phosphines, CO, CO2 and nitrogen oxides
Incompatible Materials: Avoid contact with strong alkalis, lead to violent reactions with the evolution of heat. Avoid contact with metal salts of sulfides and sulfites, which could release toxic gases. Also avoid contact with strong oxidizing agents.

11. TOXICOLOGICAL INFO

Not available.

12. ECOLOGICAL INFORMATION

Environmental Toxicity:
Study results of similar item as represented by this MSDS material is as follows:
96 Hr Cl50 sunfish (Lepomis macrochirus)> 330 mg / l BOD5 = 150,000 mg/l
96 Hr LC50 Rainbow trout (Oncorhynchus mykiss)> 330 mg / l COD = 553,000 mg/l
48 Hr EC50 Water flea (Daphnia Magna) = 297 mg/l
Bioconcentration by Zahn-Wellens (OECD 3026) = 17% after 28 days

13. DISPOSAL

Empty Container: "Empty" containers retain product residue (liquid and / or vapor) and can be dangerous. Empty drums should be completely drained, properly cover and send immediately to a drum reconditioner or should duly divest.
RCRA / EPA Waste Information: Products discarded as sold, is considered a characteristic of hazardous waste, RCRA and that meets the definition and characteristics of corrosivity (designated D002).
General Comments: Discarded products, as sold, is considered a hazardous waste under RCRA. This material must be disposed of in accordance with local, state, and federal laws that allow the treatment of hazardous chemical waste.

14. TRANSPORT INFORMATION

DOT USA & ADR/RID
Proper Shipping Name: Corrosive liquid acidic, organic, NOS
Technical Name: Contains Amino tris (methylene phosphonic acid)
Class ADR / RID: 8
UN / NA Number: 3265
Packaging: II

15. REGULATORY INFO

UNITED STATES
311/312 Hazard Category: Acute Health, Reactive; Fire: No Acute: Yes Chronic: No
313 Reportable Ingredients: This product doesn't contain Reportable Ingredients according to Section 313.
CERCLA Regulatory: If this product is accidentally spilled, is not subject to special notice under requirements of Comprehensive Environmental Requirements of the Response, Compensation, and Liability Act (CERCLA). Recommend contacting local authorites required to notify whether locally.
TSCA (Toxic Substances Control)
TSCA: All components of this product are listed on the TSCA inventoy or are exempt from the TSCA inventory requirements.
RCRA Status: Product discarded as sold, would be considered by RCRA as Charateristics of hazardous waste, as it meets the definition and characteristics of corosividad (designated D002).

16. OTHER INFORMATION

European/International Regulations European Labeling in Accordance with EC Directives
H290 = May cause corrosion to metals
H319 = Causes eye Irritation

Xi = Irritant
R36/38 - Irritating to eyes and skin.
S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Prepared by AJK on 15 August 2016

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

ATMP Amino tris (methylene phosphonic acid) Manufacturers:

Finoric LLC
Houston, Midland & Pleasanton, Texas, USA.

Tel: 1-855-346-6742 (1-855-FINORIC)
Email:
info@finoric.com

Most products offered from our Houston & Midland Texas area warehouse

We solicit inquiries for processing (blending, making solutions, sieving) & re-bagging needs at our Houston & Midland facility on toll manufacturing basis.
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio, Chicago and Los Angeles Area, USA.

Oil Drilling Fracking or Fracturing Chemicals
Ammonium Persulfate Acetic Acid
ATMP Phosphonate, Amino tris (methylene phosphonic acid)  
Citric Acid Clay Stabilizer
Encapsulated Gel Breaker Glycerin
Boron and Zirconium based Guar Cross Linkers Diverting Agent
DETA diethylenetriamine penta(methylene phosphonic acid) Friction Reducer
Glutaraldehyde Solution Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate
Hydrogen Sulfide Scavenger Phthalic Acid
Phthalic Anhydride Potassium chloride KCl substitute
Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Oil well fracturing drilling Biocide
Didecyl Dimethyl Ammonium Chloride Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS
Scale Inhibitor BHMT Phosphonate or BHMTPMPA
Sodium Glutaraldehyde Bisulfite Bisulphite Calcium Chloride Anhydrous
Calcium Chloride Dihydrate & Hexahydrate & Solution. Sodium Chlorite Solution
Sodium Acetate Anhydrous & Sodium Acetate Trihydrate Potassium Chloride
Zinc Chloride  

Palletized and Shrink Wrapped 25kg 50kg 55 lbs Export Import Palletized and Shrink Wrapped Drum Packing ATMP Amino tris (methylene phosphonic acid) manufacturers

12 April, 2017