Call Toll-Free: 1-855-FINORIC
Houston + Midland + Pleasanton, Texas, USA
Also Oklahoma, OK and Williston, ND USA.
Search our website here:
Citric Acid Crystals & Liquid Solution Suppliers Manufacturer's Representative, USP BP FCC Food Grade ACS Reagent
CAS No.: 77-92-9 for anhydrous and 5949-29-1 for monohydrate; Molecular Weight: 192.13 or 210.14; Chemical Formula: C6 H8 O7 or C6H8O7.H2O
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Most of our or our partner facilities are either FDA-cGMP certified, ISO-9001:2008 certified, Halal and/or Kosher certified, REACH pre-registered ISO-22000:2005 HACCP.
The marked pharmaceutical and food grade chemicals are offered by our principals directly.
MSDS of Citric Acid Crystals Manufacturers
MSDS Sheet of Citric Acid Liquid Solution Manufacturers
Synonyms: citric acid hydrate, citric acid, 2-hydroxy-1,2,3-propanetricarboxylic acid monohydrate Beta-Hydroxytricarboxylic Acid.
CAS Number: 77-92-9 for anhydrous and 5949-29-1 for monohydrate
EC# (EINECS): 201-069-1
FEMA Number: 2306
Molecular Weight: 192.13
Molecular Formula: C6 H8 O7 or C6H8O7.H2O
Category: acidulants, sequestrants, antioxidant synergists, flavoring agents
Specifications of Citric Acid Anhydrous
Item Specification Appearance Colorless or white crystal Identification and solubility Pass the test Clarity and color of solution 20% Water solution clarity Assay 99.5-101.0% Humidity ≤0.5% Sulfated Ash ≤0.1% Sulfate ≤150ppm Oxalates ≤350ppm Calcium ≤200ppm Heavy metal ≤10ppm Iron ≤50ppm Chloride ≤50ppm Readily carbureted substance Standard color Barium Pass the test Bacterial endotoxin ≤0.5IU/mg Aluminium ≤0.2ppm Arsenic ≤1ppm Mercury ≤1ppm Lead ≤1ppm Organic volatile impurity Pass the test Tridodecylamine ≤0.1ppm U.V. Radiation absorption value Pass the test -------- Mesh size: 10-30mesh as required by the buyer.
Citric acid is a weak organic acid. It is a natural preservative/conservative and is also used to add an acidic, or sour, taste to foods and soft drinks. Citric acid is a commodity chemical, and more than a million tones are produced every year by fermentation. It is used mainly as an acidifier, as a flavoring, and as a chelating agent.
As a food additive, citric acid is used as a flavoring and preservative in food and beverages, especially soft drinks. Within the European Union it is denoted by E number E330. Citric acid is found in a number of products like food, beverages, cleaners cosmetics etc. Citric acid may be used as the main ripening agent in the first steps of making mozzarella cheese. It is used as a successful alternative to nitric acid in passivation of stainless steel. Citric acid can be used to slow setting of Portland cement. It can delay setting time substantially.
And … many more applications.
We also offer Tankers Totes and carboys of Citric Acid Liquid Solution for oil & gas well operations. It is extensively used for Iron Control in oil well drilling, fracturing or fracking.
Citric Acid Monohydrate USP
Citric Acid USP Monohydrate
1,2,3-Propanetricarboxylic acid, 2-hydroxy-, monohydrate.
Citric Acid Monohydrate contains one molecule of water of hydration. It contains not less than 99.5 percent and not more than 100.5 percent of C6H8O7, calculated on the anhydrous basis.
Labeling: Where it is intended for use in dialysis solutions, it is so labeled. Where Citric Acid Monohydrate must be subjected to further processing during the preparation of injectable dosage forms to ensure acceptable levels of bacterial endotoxins, it is so labeled. Where Citric Acid Monohydrate is sterile, it is so labeled.
Identification, Infrared Absorption 197K: Dry the substance to be examined at 105 for 2 hours.
Bacterial endotoxins: The level of bacterial endotoxins is such that the requirement in the relevant dosage form monograph (s) in which Citric Acid Monohydrate is used can be met.
Sterility: Where the label states that Citric Acid Monohydrate is sterile, it meets the requirements for Sterility, in the relevant dosage form monograph(s) in which Citric Acid Monohydrate is used.
Water: between 7.5% and 9.0%.
Residue on ignition: Not more than 0.1%, determined on 1.0 g.
Readily carbonizable substances: To pass the test
Heavy metals: 0.001%.
Limit of oxalic acid: 0.036%.
Citric Acid Monohydrate BP
C6H8O7-H2O -- 210 -- 5949-29-1
Citric Acid BP Monohydrate
2-Hydroxypropane-1,2,3-tricarboxylic acid monohydrate.
Content: 99.5 per cent to 100.5 per cent (anhydrous substance).
Appearance: White or almost white, crystalline powder, colourless crystals or granules, efflorescent.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
First identification B, E.
Second identification A, C, D, E.
A. Dissolve 1 g in 10 ml of water. The solution is strongly acidic.
B. Infrared absorption spectrophotometry.
C. Add about 5 mg to a mixture of 1 ml of acetic anhydride and 3 ml of pyridine. A red colour develops.
D. Dissolve 0.5 g in 5 ml of water, neutralize using 1 M sodium hydroxide (about 7 ml), add 10 ml of calcium chloride solution R and heat to boiling. A white precipitate is formed.
E. Water (see Tests).
Appearance of solution: The solution is clear and not more intensely coloured than reference.
Dissolve 2.0 g in water and dilute to 10 ml with the same solvent.
Readily carbonizable substances: To 1.0 g in a cleaned test tube add 10 ml of sulphuric acid and immediately heat the mixture in a water-bath at 90 ± 1 °C for 60 min. Cool rapidly immediately afterwards. The solution is not more intensely coloured than a mixture of 1 ml of red primary solution and 9 ml of yellow primary solution.
Oxalic acid: Maximum 360 ppm, calculated as anhydrous oxalic acid.
Sulphates: Maximum 150 ppm.
Aluminium: Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Heavy metals: Maximum 10 ppm.
Water: 7.5 per cent to 9.0 per cent, determined on 0.500 g.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Bacterial endotoxins: Less than 0.5 IU/mg, if intended for use in the manufacture of parenteral dosage forms without a further appropriate procedure for the removal of bacterial endotoxins.
Citric Acid FCC Food Grade
C6H8O7 Formula wt, anhydrous 192.13
C6H8O7·H2O Formula wt, monohydrate 210.14
INS: 330 CAS: anhydrous [77-92-9]
CAS: monohydrate [5949-29-1]
Citric Acid occurs as colorless, translucent crystals or as a white, granular to fine, crystalline powder. It is anhydrous or contains one molecule of water of hydration. The hydrous form is efflorescent in dry air. It is odorless and has a strongly acid taste. One gram is soluble in about 0.5 mL of water, in about 2 mL of alcohol, and in about 30 mL of ether.
Function: Sequestrant; dispersing agent; acidifier; flavoring agent.
Labeling: Indicate whether it is anhydrous or hydrous.
Identification: A 1:10 aqueous solution gives positive tests for Citrate.
Assay: Not less than 99.5% and not more than 100.5% of C6H8O7, calculated on the anhydrous basis.
Lead: Not more than 0.5 mg/kg.
Oxalate: Passes test.
Readily Carbonizable: Substances Passes test.
Residue on Ignition: Not more than 0.05%.
Tridodecylamine (for solvent-extracted Citric Acid only): Not more than 0.1 mg/kg.
Water: Anhydrous: Not more than 0.5%; Monohydrate: Not more than 8.8%.
Citric Acid ACS Analytical Reagent
Citric Acid, Anhydrous, and Citric Acid, Monohydrate
HOCOCH2C(OH)(COOH)CH2COOH; Formula Wt. 192.13
HOCOCH2C(OH)(COOH)CH2COOH-H2O; Formula Wt. 210.14
CAS Number 77-92-9 (Anhydrous); 5949-29-1 (Monohydrate)
Assay: 99.5% C6H8O7; 99.0-102.0% C6H8O7-H2O min
Insoluble matter: 0.005%
Residue after ignition: 0.02%
Chloride (Cl): 0.001%
Oxalate (C2O4): Passes test
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.002%
Iron (Fe): 3 ppm
Lead (Pb): 2 ppm
Substances carbonizable by hot sulfuric acid: Passes test
Citric Acid Suppliers:
Beasley Houston Pleasanton Midland, Texas, USA.
Also Oklahoma, OK and Williston, ND USA
Tel: 1-855-346-6742 (1-855-FINORIC)
Most products offered from our Houston TX, Midland TX, Pleasanton TX and Oklahoma, OK and Williston, ND area warehouse
We are looking for Technical Sales Representatives or Business Associates in New York, Williston North Dakota, Mansfield Pennsylvania, Zanesville, Ohio and Los Angeles Area, USA.
Shale Gas Hydraulic Fracturing, Coil Tubing, Slick Water, Production, Stimulation, Well Intervention, Cementing Chemicals, Summary Line Card Ammonium Persulfate Acetic Acid Acid Emulsifier Acid Retarder Acid Viscosifier Acid Corrosion Inhibitor Ammonium Bifluoride ATMP Phosphonate, Amino tris (methylene phosphonic acid) Barium Sulfate Remover BHMT Phosphonate or BHMTPMPA Bellacide 300 & Bellacide 355 BME Iron Reducer or Dissolver Boron and Zirconium based Guar Cross Linkers Cement Defoamer Encapsulated Citric Acid Citric Acid Clay Stabilizer Coil Tubing Lube, CTG Lube Diverting Agent DETA diethylenetriamine penta(methylene phosphonic acid) Didecyl Dimethyl Ammonium Chloride Encapsulated Gel Breaker Enzyme Gel Breaker Fe46 - Iron Control Blend Dry Friction ReducerFinoFR-8 Flow Back Aid Foam 810 FinoPAC Multipurpose Additive, corrosion inhibitor cum bactericide and oxygen scavenger FinoFoam-D, Foamer for Deliquification or Unloading of Gas Wells Heavy Crude Foamer Foam418 Friction Reducer Fast Hydrating Guar Gum Powder Granules Slurry Glutaraldehyde Solution Glycerin Gas Hydrate Inhibitor Gel Sweep, FinoSweep Iron Sulfide Scale Inhibitor Finotreat FeS High pH Buffer HP HT Lube Hydroxy ethylidene Diphosphonic Acid, HEDP Phosphonate FinoScav-NT Non-Triazine Based H2S Hydrogen Sulfide Scavenger Hydrogen Sulfide Scavenger Liquid FR Breaker FRB-1 Fino Liquid Beads Mud Remover Cleaner Non Emulsifier for acidizing Nomul Non-Emulsifier for Brines Oil Gelling Agent Oil well fracturing drilling Biocide Packer Fluid Inhibitor Paraffin Dispersant Phthalic Acid Phthalic Anhydride Pipe Pickle Potassium chloride KCl substitute Particle Gel for Conformance Control Potassium salt of Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Relative Permeability Modifier and Water Gas Shut-Off, AquaControl Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Scale Inhibitor Scalegone Solid - Scale Paraffin Asphaltene Inhibitor Sand Consolidation System Sodium Bromate Tetrakis (Hydroxy methyl) Phosphonium Sulfate THPS Total Acidizing System Xanthan Gum Slurry Calcium Chloride Anhydrous Calcium Chloride Dihydrate & Hexahydrate & Solution. Potassium Chloride Zinc Chloride
19 August, 2018